Author Index

A

  • Abbasi, STATISTICAL MODELING OF SYNTHESIZING OF ALUMINUM BASED NANOCOMPSOITE PARTICLES REINFORCED BY SiC VIA MECHANICAL ALLOYING PROCESS [Volume 10, Issue 29, 2012, Pages 43-60]
  • Abdollahzadeh, BEHAVIOR FACTOR OF STEEL DUAL FRAMES WITH LARGE- SCALED CONCENTRICALLY BRACING SYSTEMS [Volume 10, Issue 31, 2012, Pages 1-13]
  • Abrishamifar, MODELING AND NUMERICAL ANALYSIS OF THYRISTOR BASED CONVERTERS BY MULTI-VARIABLE RUNGE-KUTTA ALGORITHM [Volume 10, Issue 29, 2012, Pages 33-42]
  • Akbari, NUMERICAL ANALYSIS EFFECT OF AIRCRAFT MAIN GEARS ON THE CRITICAL ZONES OF RUNWAY RIGID PAVEMENT [Volume 10, Issue 29, 2012, Pages 61-70]
  • Aligoodarz, NUMERICAL SIMULATION OF SGT-600 GAS TURBINE COMBUSTOR AND FLOW FIELD UNDER OPERATION CONDITION [Volume 10, Issue 31, 2012, Pages 25-35]
  • Amjady, SHORT-TERM HYDROTHERMAL COORDINATION CONSIDERING SECURITY CONSTRAINTS AND VOLTAGE STABILITY [Volume 10, Issue 28, 2012, Pages 53-67]
  • Amrahnejad, ANALYSIS OF AXISYMMETRIC SHEET HYDROFORMING PROCESS [Volume 10, Issue 31, 2012, Pages 49-57]
  • Ansari, SHORT-TERM HYDROTHERMAL COORDINATION CONSIDERING SECURITY CONSTRAINTS AND VOLTAGE STABILITY [Volume 10, Issue 28, 2012, Pages 53-67]
  • Ashory, CORRECTION OF MASS-LOADING EFFECTS OF ACCELEROMETERS ON THE MEASURED FRFs USING OPTIMIZED MASS CHANGE ALGORITHM [Volume 10, Issue 30, 2012, Pages 19-31]
  • Azari-far, EFFECTS OF END FORM OF T-JOINT WELDS ON FORMATION OF RESIDUAL STRESSES [Volume 10, Issue 29, 2012, Pages 81-90]

B

  • Baghaee, AERO-HYDRO-ELASTIC SIMULATION OF TENSION LEG PLATFORM WIND TURBINE [Volume 10, Issue 30, 2012, Pages 1-17]
  • Bagheri, MODELING OF THRUST AND SPECIFIC FUEL CONSUMPTION FOR A TURBOFAN ENGINE VIA GMDH-TYPE NEURAL NETWORKS [Volume 10, Issue 28, 2012, Pages 1-7]

C

  • Chaharsooghi, A COORDINATION MODEL FOR A COMPETITIVE SUPPLY CHAIN USING COOPERATIVE AND NON-COOPERATIVE GAME THEORY [Volume 10, Issue 29, 2012, Pages 19-31]

D

  • Damghani Nouri, ANALYTICAL SOLTION AND SIMULATION OF DYNAMIC STRESS INTENSITY FACTOR AND STRESS FILED DETERMINATION ON THE CRACKED PLATE UNDER BLAST LOADING [Volume 10, Issue 29, 2012, Pages 71-80]
  • Damghani Nouri, ANALYTICAL SOLTION AND SIMULATION OF DYNAMIC STRESS INTENSITY FACTOR AND STRESS FILED DETERMINATION ON THE CRACKED PLATE UNDER BLAST LOADING [Volume 10, Issue 29, 2012, Pages 71-80]
  • Dashtbayazi, STATISTICAL MODELING OF SYNTHESIZING OF ALUMINUM BASED NANOCOMPSOITE PARTICLES REINFORCED BY SiC VIA MECHANICAL ALLOYING PROCESS [Volume 10, Issue 29, 2012, Pages 43-60]
  • Dehghan, SIMULATION AND INVESTIGATION OF RING COMPRESSION TEST FOR FRICTION MEASURMENT IN HOT FORGING PROCESS [Volume 10, Issue 31, 2012, Pages 59-67]
  • Doai, SIMULATION AND INVESTIGATION OF RING COMPRESSION TEST FOR FRICTION MEASURMENT IN HOT FORGING PROCESS [Volume 10, Issue 31, 2012, Pages 59-67]

E

  • Ebnodin, SHAPE OPTIMIZATION OF SUPERSONIC WIND TUNNEL DIFFUSER USING GENETIC ALGORITHM [Volume 10, Issue 28, 2012, Pages 19-29]
  • Eghbali, MODELING OF ROTARY REGENERATORS [Volume 10, Issue 28, 2012, Pages 9-18]

F

  • Falaghi, WIND FARM EFFECTS ON TOTAL TRANSFER CAPABILITY [Volume 10, Issue 30, 2012, Pages 61-75]
  • Farahat, SHAPE OPTIMIZATION OF SUPERSONIC WIND TUNNEL DIFFUSER USING GENETIC ALGORITHM [Volume 10, Issue 28, 2012, Pages 19-29]

G

  • Ghasemi, MODELLING OF FCC PROCESS BASED ON CLUSTER SIZE VARIATION ALONG THE RISER [Volume 10, Issue 30, 2012, Pages 87-97]
  • Ghoddosian, SHAPE OPTIMIZATION OF CONTACT PROBLEMS SUBJECT TO MULTIPLE LOAD CASES USING BI-DIRECTIONAL EVOLUTIONARY STRUCTURAL OPTIMIZATION [Volume 10, Issue 30, 2012, Pages 77-86]
  • Ghodrati Amiri, INVESTIGATION OF DETERIORATION OF HYSTERETIC LOOPS IN NONLINEAR STATIC ANALYSIS (PUSHOVER) FOR SPECIAL MOMENT RESISTING FRAME WITH SHEAR WALLS [Volume 10, Issue 30, 2012, Pages 33-41]

H

  • Haghifam, WIND FARM EFFECTS ON TOTAL TRANSFER CAPABILITY [Volume 10, Issue 30, 2012, Pages 61-75]
  • Haghighat, UPPER BOUND ANALYSIS OF BIMETAL SHEET EXTRUSION PROCESS THROUGH TAPER DIES [Volume 10, Issue 28, 2012, Pages 43-51]
  • Haghighat, ANALYSIS OF AXISYMMETRIC SHEET HYDROFORMING PROCESS [Volume 10, Issue 31, 2012, Pages 49-57]
  • Hamedi Estakhrsar, NUMERICAL STUDY OF THE EFFECTIVE PARAMETERS ON THE PERFORMANCE OF EDDY INTERACTION MODEL FOR A WAVE-PLATE MIST ELIMINATOR [Volume 10, Issue 31, 2012, Pages 69-84]
  • HashemiNejad, AERO-HYDRO-ELASTIC SIMULATION OF TENSION LEG PLATFORM WIND TURBINE [Volume 10, Issue 30, 2012, Pages 1-17]
  • Hekmat Nazemi, MODELLING OF FCC PROCESS BASED ON CLUSTER SIZE VARIATION ALONG THE RISER [Volume 10, Issue 30, 2012, Pages 87-97]
  • Hemmat Esfe, EVALUATION OF MIXED CONVECTION HEAT TRANSFER AND THERMAL CHARACTERISTIC AROUND TWO HEATED OBSTACLES IN INCLINED SQUARE CAVITY SUBJECTED TO A NANOFLUID [Volume 10, Issue 28, 2012, Pages 31-42]
  • Hemmat Esfe, FLOW BEHAVIOR AND THERMAL PERFORMANCE OF DOUBLE LID-DRIVEN CAVITY SUBJECTED TO NANOFLUID WITH VARIABLE PROPERTIES [Volume 10, Issue 30, 2012, Pages 43-60]

J

  • Javadpour, SHAPE OPTIMIZATION OF SUPERSONIC WIND TUNNEL DIFFUSER USING GENETIC ALGORITHM [Volume 10, Issue 28, 2012, Pages 19-29]
  • Javidrad, DEVELOPMENT OF A REVERSE ENGINEERING PROCEDURE FOR UPGRADING AND MANUFACTURING OF LEGACY MECHANICAL AND STRUCTURAL COMPONENTS [Volume 10, Issue 28, 2012, Pages 69-82]

K

  • Kashi, NUMERICAL ANALYSIS EFFECT OF AIRCRAFT MAIN GEARS ON THE CRITICAL ZONES OF RUNWAY RIGID PAVEMENT [Volume 10, Issue 29, 2012, Pages 61-70]
  • Khatibi, CORRECTION OF MASS-LOADING EFFECTS OF ACCELEROMETERS ON THE MEASURED FRFs USING OPTIMIZED MASS CHANGE ALGORITHM [Volume 10, Issue 30, 2012, Pages 19-31]
  • Kheyroddin, MODELING AND ESTIMATION OF PLASTIC HINGE LENGTH OF RC COLUMNS USING ARTIFICIAL NEURAL NETWORKS [Volume 10, Issue 29, 2012, Pages 1-17]

L

  • Lotfollahi Yaghin, ANALYTICAL STUDY OF CONCRETE-FILLED DOUBLE SKIN STEEL TUBULAR COLUMNS UNDER INTERACTION OF BENDING MOMENT AND AXIAL LOAD [Volume 10, Issue 31, 2012, Pages 15-23]

M

  • Mashayekhi, THE MATHEMATICAL FORM OF MATERIAL CONSTITUTIVE LAWS APPLICABLE FOR MODELING OF METAL PLASTIC BEHAVIOR IN SIMULATION OF MACHINING [Volume 10, Issue 31, 2012, Pages 37-48]
  • Mohammadi, BEHAVIOR FACTOR OF STEEL DUAL FRAMES WITH LARGE- SCALED CONCENTRICALLY BRACING SYSTEMS [Volume 10, Issue 31, 2012, Pages 1-13]
  • Mortezaei, MODELING AND ESTIMATION OF PLASTIC HINGE LENGTH OF RC COLUMNS USING ARTIFICIAL NEURAL NETWORKS [Volume 10, Issue 29, 2012, Pages 1-17]
  • Mousavi, EFFECTS OF END FORM OF T-JOINT WELDS ON FORMATION OF RESIDUAL STRESSES [Volume 10, Issue 29, 2012, Pages 81-90]

N

  • Naimi Sadigh, A COORDINATION MODEL FOR A COMPETITIVE SUPPLY CHAIN USING COOPERATIVE AND NON-COOPERATIVE GAME THEORY [Volume 10, Issue 29, 2012, Pages 19-31]
  • Naimi Sadigh, A COORDINATION MODEL FOR A COMPETITIVE SUPPLY CHAIN USING COOPERATIVE AND NON-COOPERATIVE GAME THEORY [Volume 10, Issue 29, 2012, Pages 19-31]

P

  • Pourmoayed, DEVELOPMENT OF A REVERSE ENGINEERING PROCEDURE FOR UPGRADING AND MANUFACTURING OF LEGACY MECHANICAL AND STRUCTURAL COMPONENTS [Volume 10, Issue 28, 2012, Pages 69-82]

Q

  • Qods, SIMULATION AND INVESTIGATION OF RING COMPRESSION TEST FOR FRICTION MEASURMENT IN HOT FORGING PROCESS [Volume 10, Issue 31, 2012, Pages 59-67]

R

  • Rafee, NUMERICAL STUDY OF THE EFFECTIVE PARAMETERS ON THE PERFORMANCE OF EDDY INTERACTION MODEL FOR A WAVE-PLATE MIST ELIMINATOR [Volume 10, Issue 31, 2012, Pages 69-84]
  • Rafiei, MODELING OF ROTARY REGENERATORS [Volume 10, Issue 28, 2012, Pages 9-18]
  • Rahmani, ANALYTICAL SOLTION AND SIMULATION OF DYNAMIC STRESS INTENSITY FACTOR AND STRESS FILED DETERMINATION ON THE CRACKED PLATE UNDER BLAST LOADING [Volume 10, Issue 29, 2012, Pages 71-80]
  • Rahmati, MODELING AND NUMERICAL ANALYSIS OF THYRISTOR BASED CONVERTERS BY MULTI-VARIABLE RUNGE-KUTTA ALGORITHM [Volume 10, Issue 29, 2012, Pages 33-42]
  • Ramezani, WIND FARM EFFECTS ON TOTAL TRANSFER CAPABILITY [Volume 10, Issue 30, 2012, Pages 61-75]
  • Razavian Amrei, INVESTIGATION OF DETERIORATION OF HYSTERETIC LOOPS IN NONLINEAR STATIC ANALYSIS (PUSHOVER) FOR SPECIAL MOMENT RESISTING FRAME WITH SHEAR WALLS [Volume 10, Issue 30, 2012, Pages 33-41]
  • Rezvani, ANALYTICAL SOLTION AND SIMULATION OF DYNAMIC STRESS INTENSITY FACTOR AND STRESS FILED DETERMINATION ON THE CRACKED PLATE UNDER BLAST LOADING [Volume 10, Issue 29, 2012, Pages 71-80]
  • Rezvani, ANALYTICAL SOLTION AND SIMULATION OF DYNAMIC STRESS INTENSITY FACTOR AND STRESS FILED DETERMINATION ON THE CRACKED PLATE UNDER BLAST LOADING [Volume 10, Issue 29, 2012, Pages 71-80]
  • Rostami, SHAPE OPTIMIZATION OF CONTACT PROBLEMS SUBJECT TO MULTIPLE LOAD CASES USING BI-DIRECTIONAL EVOLUTIONARY STRUCTURAL OPTIMIZATION [Volume 10, Issue 30, 2012, Pages 77-86]

S

  • Sadodin, EVALUATION OF MIXED CONVECTION HEAT TRANSFER AND THERMAL CHARACTERISTIC AROUND TWO HEATED OBSTACLES IN INCLINED SQUARE CAVITY SUBJECTED TO A NANOFLUID [Volume 10, Issue 28, 2012, Pages 31-42]
  • Sadodin, EVALUATION OF MIXED CONVECTION HEAT TRANSFER AND THERMAL CHARACTERISTIC AROUND TWO HEATED OBSTACLES IN INCLINED SQUARE CAVITY SUBJECTED TO A NANOFLUID [Volume 10, Issue 28, 2012, Pages 31-42]
  • Saedodin, FLOW BEHAVIOR AND THERMAL PERFORMANCE OF DOUBLE LID-DRIVEN CAVITY SUBJECTED TO NANOFLUID WITH VARIABLE PROPERTIES [Volume 10, Issue 30, 2012, Pages 43-60]
  • Saedodin, FLOW BEHAVIOR AND THERMAL PERFORMANCE OF DOUBLE LID-DRIVEN CAVITY SUBJECTED TO NANOFLUID WITH VARIABLE PROPERTIES [Volume 10, Issue 30, 2012, Pages 43-60]
  • Salimi, THE MATHEMATICAL FORM OF MATERIAL CONSTITUTIVE LAWS APPLICABLE FOR MODELING OF METAL PLASTIC BEHAVIOR IN SIMULATION OF MACHINING [Volume 10, Issue 31, 2012, Pages 37-48]
  • Seifi, EFFECTS OF END FORM OF T-JOINT WELDS ON FORMATION OF RESIDUAL STRESSES [Volume 10, Issue 29, 2012, Pages 81-90]
  • Shafabakhsh, NUMERICAL ANALYSIS EFFECT OF AIRCRAFT MAIN GEARS ON THE CRITICAL ZONES OF RUNWAY RIGID PAVEMENT [Volume 10, Issue 29, 2012, Pages 61-70]
  • Shahriari, MODELING OF THRUST AND SPECIFIC FUEL CONSUMPTION FOR A TURBOFAN ENGINE VIA GMDH-TYPE NEURAL NETWORKS [Volume 10, Issue 28, 2012, Pages 1-7]
  • Shahriari, DEVELOPMENT OF A REVERSE ENGINEERING PROCEDURE FOR UPGRADING AND MANUFACTURING OF LEGACY MECHANICAL AND STRUCTURAL COMPONENTS [Volume 10, Issue 28, 2012, Pages 69-82]
  • Shahverdi, AERO-HYDRO-ELASTIC SIMULATION OF TENSION LEG PLATFORM WIND TURBINE [Volume 10, Issue 30, 2012, Pages 1-17]
  • Sharifi, MODELING OF THRUST AND SPECIFIC FUEL CONSUMPTION FOR A TURBOFAN ENGINE VIA GMDH-TYPE NEURAL NETWORKS [Volume 10, Issue 28, 2012, Pages 1-7]
  • Shayesteh, UPPER BOUND ANALYSIS OF BIMETAL SHEET EXTRUSION PROCESS THROUGH TAPER DIES [Volume 10, Issue 28, 2012, Pages 43-51]
  • Sheikhi, INVESTIGATION OF DETERIORATION OF HYSTERETIC LOOPS IN NONLINEAR STATIC ANALYSIS (PUSHOVER) FOR SPECIAL MOMENT RESISTING FRAME WITH SHEAR WALLS [Volume 10, Issue 30, 2012, Pages 33-41]
  • Sheikhi, SHAPE OPTIMIZATION OF CONTACT PROBLEMS SUBJECT TO MULTIPLE LOAD CASES USING BI-DIRECTIONAL EVOLUTIONARY STRUCTURAL OPTIMIZATION [Volume 10, Issue 30, 2012, Pages 77-86]
  • Sheikh mohammadi, A COORDINATION MODEL FOR A COMPETITIVE SUPPLY CHAIN USING COOPERATIVE AND NON-COOPERATIVE GAME THEORY [Volume 10, Issue 29, 2012, Pages 19-31]
  • Skandarnezhad, MODELING AND NUMERICAL ANALYSIS OF THYRISTOR BASED CONVERTERS BY MULTI-VARIABLE RUNGE-KUTTA ALGORITHM [Volume 10, Issue 29, 2012, Pages 33-42]

T

  • Taleshi Anbouhi, CORRECTION OF MASS-LOADING EFFECTS OF ACCELEROMETERS ON THE MEASURED FRFs USING OPTIMIZED MASS CHANGE ALGORITHM [Volume 10, Issue 30, 2012, Pages 19-31]

V

  • Vaziri Sereshk, THE MATHEMATICAL FORM OF MATERIAL CONSTITUTIVE LAWS APPLICABLE FOR MODELING OF METAL PLASTIC BEHAVIOR IN SIMULATION OF MACHINING [Volume 10, Issue 31, 2012, Pages 37-48]

Y

  • Yahyazadeh Saravi, MODELLING OF FCC PROCESS BASED ON CLUSTER SIZE VARIATION ALONG THE RISER [Volume 10, Issue 30, 2012, Pages 87-97]

Z

  • Zamani, CORRECTION OF MASS-LOADING EFFECTS OF ACCELEROMETERS ON THE MEASURED FRFs USING OPTIMIZED MASS CHANGE ALGORITHM [Volume 10, Issue 30, 2012, Pages 19-31]
  • Zaree, DEVELOPMENT OF A REVERSE ENGINEERING PROCEDURE FOR UPGRADING AND MANUFACTURING OF LEGACY MECHANICAL AND STRUCTURAL COMPONENTS [Volume 10, Issue 28, 2012, Pages 69-82]
  • Zeinali, MODELING OF ROTARY REGENERATORS [Volume 10, Issue 28, 2012, Pages 9-18]
  • Ziyaeioun, ANALYTICAL STUDY OF CONCRETE-FILLED DOUBLE SKIN STEEL TUBULAR COLUMNS UNDER INTERACTION OF BENDING MOMENT AND AXIAL LOAD [Volume 10, Issue 31, 2012, Pages 15-23]