Author Index

A

  • Abdi, Anita Multi-Objective Closed-loop Supply Chain Considering Vehicles and Solving by New Approaches in Metaheuristics [Volume 17, Issue 59, 2019, Pages 67-85]
  • Aghelan, Mohsen Supply chain network redesign to make resiliency with proposing “two-phase establishment facilities” as risk mitigation strategy [Volume 17, Issue 56, 2019, Pages 327-346]
  • Aghelan, Mohsen Designing of a four-level closed loop Supply Chain Network with an Integration Approach for Economic, Environmental, and Social Responsibility about Employees [Volume 17, Issue 57, 2019, Pages 69-92]
  • Ahangarpour, Ameneh Modeling of thermal conductivity of ethylene glycol nanofluids containing carbon nanotubes by Multilayer Perceptron neural network [Volume 17, Issue 59, 2019, Pages 1-9]
  • Akhlaghi, Fatemeh Evaluation of Chahchahe Earth Dam Behaviour during Construction and First Impoundment Stage Using the Results of Monitoring and Back Analysis [Volume 17, Issue 59, 2019, Pages 11-24]
  • Alijani, Ali Analytical and Numerical Modeling of Stress Intensity Factor in I-Shaped Cross Sections of Cracked Beams [Volume 17, Issue 56, 2019, Pages 131-142]
  • Aminizadeh, Nasrin Numerical simulation of laminar forced convection flow with entropy generation analysis in a duct with two expansions - Blocked-off method [Volume 17, Issue 56, 2019, Pages 73-83]
  • Aminzadeh, Hamed Modeling and Calibration of Linear and Nonlinear Gain Factors in Different Stages of Pipelined Analog-to-Digital Converters Using a Modified Correlation Algorithm [Volume 17, Issue 56, 2019, Pages 101-109]
  • Amirabadi, Hossein Numerical and Experimental Investigation on Springback of AL5083-H111 alloy Sheet in Warm U-Bending Conditions [Volume 17, Issue 56, 2019, Pages 13-21]
  • Ansari, Mohammad Reza Optimization and control of hybrid vehicles with considering penalty factors for emission and based on the PSO algorithm [Volume 17, Issue 57, 2019, Pages 227-239]
  • Armaghani, Saber Solving Transmission Expansion Planning problem to Mitigate Cascading Failure Impacts using Transmission Network Vulnerability Analysis and Assessment approach [Volume 17, Issue 58, 2019, Pages 143-157]
  • Asgari, Mansour Constitutive Model for Estimating Concrete Strength Using Ultrasonic Test Considering Mixing Ratios [Volume 17, Issue 56, 2019, Pages 367-374]
  • Ataei, Mohammad Observed and Un-Observed Covariate Effects on Baseline Hazard Rate - Case study: Jajarm Bauxite Mine [Volume 17, Issue 59, 2019, Pages 225-243]
  • Atashafrooz, Meysam Numerical simulation of laminar forced convection flow with entropy generation analysis in a duct with two expansions - Blocked-off method [Volume 17, Issue 56, 2019, Pages 73-83]
  • Azad darmian, Jamshid Study of the effect of friction rotational damper, viscoelastic and TADAS on the structures seismic behaviour [Volume 17, Issue 59, 2019, Pages 87-107]
  • Azizollah Ganji, Bahram Design of MEMS Frog shape Microphone with High Sensitivity and low voltage using PSO Algorithm [Volume 17, Issue 59, 2019, Pages 141-151]

B

  • Babaee Tirkolaee, Erfan Solving the multi-trip vehicle routing problem with time windows in urban waste management using grey wolf optimization algorithm [Volume 17, Issue 57, 2019, Pages 93-110]
  • Baghani, Mostafa Study of healing effect on mechanical behavior of a smart asphalt pavement and permanent deformations due to a moving load in the framework of finite element analysis [Volume 17, Issue 57, 2019, Pages 253-264]
  • Bahadori, Fatemeh Evaluation of pollutants and greenhouse emissions using gasoline-ethanol blends in gasoline engines [Volume 17, Issue 59, 2019, Pages 255-262]
  • Bahrani Khademi, saeed Optimization of MLP Neural Network Using the FinGrain Parallel Genetic Algorithm for Breast Cancer Diagnosis [Volume 17, Issue 57, 2019, Pages 173-186]
  • Banisi4, Samad An Investigation into the Relationships Determining Ball Trajectory in Mills by Using the Physical Modelling [Volume 17, Issue 58, 2019, Pages 203-214]
  • Barabadi, Reza Observed and Un-Observed Covariate Effects on Baseline Hazard Rate - Case study: Jajarm Bauxite Mine [Volume 17, Issue 59, 2019, Pages 225-243]
  • Baradaran, Vahid Development of a dynamic game theory model for analyzing competition in the oligopoly markets (Feedback Approach) [Volume 17, Issue 59, 2019, Pages 263-276]
  • Baradaran Kazemzadeh, Reza Robust optimization of a discrete time-cost-environment trade-off problem by considering uncertainty in time and cost [Volume 17, Issue 58, 2019, Pages 215-232]
  • Bashipour, Fatemeh Sensitivity analysis and uncertainty of density correction factor of natural gas based on the AGA8-standard modeling to operational and environmental parameters [Volume 17, Issue 57, 2019, Pages 42-54]
  • Beigzadeh, Reza Heat transfer enhancement in micro heat exchangers using genetic algorithm based multi-objective optimization [Volume 17, Issue 59, 2019, Pages 25-34]
  • Bibak, hadis Prediction of optimal mixing design for stabilized soft clay soil using Artificial Neural Networks [Volume 17, Issue 57, 2019, Pages 147-158]
  • Binabaji, Yusuf Numerical analysis of the effects of gravitational acceleration on aerosol deposition in the human trachea-bronchial airways: A 3D Computational Simulation [Volume 17, Issue 59, 2019, Pages 109-128]
  • Bolouki Speily, omid reza Modeling Users’ Repost Behavior in Online Communities Using a Team of Learning Automata [Volume 17, Issue 59, 2019, Pages 195-214]

C

  • Chakeri, Hamid Investigation of interaction Between Tabriz metro tunnels (lines 1, 2 and 3) [Volume 17, Issue 58, 2019, Pages 41-53]

E

  • Ebrahimi Hoseinzadeh, Bahman Molecular dynamics simulation of interaction of the anti-cancer drug paclitaxel with the cell membrane: investigation of changes in van der Waals energy and center of mass [Volume 17, Issue 57, 2019, Pages 15-25]
  • Eghbalpoor, Roozbeh Study of healing effect on mechanical behavior of a smart asphalt pavement and permanent deformations due to a moving load in the framework of finite element analysis [Volume 17, Issue 57, 2019, Pages 253-264]
  • Emadi, Sima Service Function Chaining Based on Grammar in Software Defined Networks [Volume 17, Issue 57, 2019, Pages 187-199]
  • Emami, Saeed Scheduling of jobs and maintenance activities in an unrelated parallel machines environment [Volume 17, Issue 58, 2019, Pages 233-247]
  • Eslami, Sajjad Effect of Turbulence Model on Numerical Simulation of Turbulent Flow of Nanofluids in a Horizontal Pipe [Volume 17, Issue 58, 2019, Pages 279-293]
  • Esmaeili, Sheida Investigation of the oxygen function in the selective oxidation of propane to acrylic acid over Mo1V0.3Te0.23Nb0.12Ox catalyst using kinetic modeling [Volume 17, Issue 57, 2019, Pages 55-68]
  • Ezzati, nematollah Distributed spectrum sensing in rem based cognitive radio networks [Volume 17, Issue 56, 2019, Pages 223-233]

F

  • Farahi Shahri, Saeed A fast hybrid refining optimization with sensitivity-based partitioning approach for truss structures [Volume 17, Issue 57, 2019, Pages 127-146]
  • Farbod, Mansoor Modeling of thermal conductivity of ethylene glycol nanofluids containing carbon nanotubes by Multilayer Perceptron neural network [Volume 17, Issue 59, 2019, Pages 1-9]
  • Frashad, Seyed Ali Numerical modeling for thermal performance augmentation of nanofluid in solar flat plate collector equipped with twisted tape [Volume 17, Issue 57, 2019, Pages 295-313]

G

  • Gerami, Nilufar Energy Consumption Modeling of Manufacturing Processes in Industrial Units Based on Linear Piece-Wise Approximation Method with the aim of Implementing Demand Response Programs and Participating in Energy and Ancillary Service Market [Volume 17, Issue 59, 2019, Pages 179-193]
  • Ghaderi, Fatemeh Mathematical modeling and investigating the effect of the area of the horizontal stabilizer on the stability of a single-main-rotor helicopter in forward flight [Volume 17, Issue 58, 2019, Pages 69-80]
  • Ghahremani, Amir Optimization of open pit mines fleet using Simulation-based optimization method (Case study: SONGUN copper mine) [Volume 17, Issue 56, 2019, Pages 169-190]
  • Ghalehnovi, Mansour Study of the effect of friction rotational damper, viscoelastic and TADAS on the structures seismic behaviour [Volume 17, Issue 59, 2019, Pages 87-107]
  • Ghareh, Soheil Evaluation of Chahchahe Earth Dam Behaviour during Construction and First Impoundment Stage Using the Results of Monitoring and Back Analysis [Volume 17, Issue 59, 2019, Pages 11-24]
  • Ghasemi, Ahmad Energy Consumption Modeling of Manufacturing Processes in Industrial Units Based on Linear Piece-Wise Approximation Method with the aim of Implementing Demand Response Programs and Participating in Energy and Ancillary Service Market [Volume 17, Issue 59, 2019, Pages 179-193]
  • Ghasemi, Mohammad Reza A fast hybrid refining optimization with sensitivity-based partitioning approach for truss structures [Volume 17, Issue 57, 2019, Pages 127-146]
  • Ghayur safar, Jalil Comprehensive Modeling of Transient Analysis of Grounding System under Lightning Surges [Volume 17, Issue 59, 2019, Pages 165-177]
  • Ghazi Mirsaeid, Seyed Amir Farhad Improving the Structural Health Monitoring System in Detection of Tiny Crack Locations using Wavelet Transform and Digital Filter [Volume 17, Issue 58, 2019, Pages 305-316]
  • Ghobadisamani, Mohammad Optimization of open pit mines fleet using Simulation-based optimization method (Case study: SONGUN copper mine) [Volume 17, Issue 56, 2019, Pages 169-190]
  • Ghodrati, Maryam Improvement in the Performance of Tunneling Carbon Nanotube Field Effects Transistor in Presence of Underlap [Volume 17, Issue 59, 2019, Pages 215-224]
  • Ghourejili, Shamsedin Investigation of effective parameters on hydrodynamics of rotating packed bed using computational fluid dynamics [Volume 17, Issue 59, 2019, Pages 35-45]

H

  • Haddad, Tina Equivalent Stiffness Calculation of a Journal Bearing by Analytical Approach for Vibrational Modeling [Volume 17, Issue 59, 2019, Pages 129-139]
  • Hafezi, Reza An Integrated Model to Develop Semi-Quantitative Scenarios Using a hybrid Method Based on Fuzzy Cognitive Map: A Case Study of Iranian Oil Production [Volume 17, Issue 56, 2019, Pages 157-168]
  • Hajiabadi, Mohammad Ebrahim Combined preventive and predictive maintenance model of power transformers (Case study: Khorasan Regional Electricity Company) [Volume 17, Issue 56, 2019, Pages 421-439]
  • Hajiaghaei-Keshteli, Mostafa Multi-Objective Closed-loop Supply Chain Considering Vehicles and Solving by New Approaches in Metaheuristics [Volume 17, Issue 59, 2019, Pages 67-85]
  • Hajighorbani, Ramezanali Axisymmetric Elastic stress investigation of a 2D- FGM thick hollow cylinder with new material model [Volume 17, Issue 56, 2019, Pages 111-122]
  • Hassanifard, Soran Investigating the effect on the position in advancing and retreating side on the mechanical properties of the joint samples in the friction stir welding of 6061 and 5054 aluminum alloys [Volume 17, Issue 57, 2019, Pages 265-272]
  • Hesam, Abed Scheduling of jobs and maintenance activities in an unrelated parallel machines environment [Volume 17, Issue 58, 2019, Pages 233-247]
  • Hesami, Reshad An Investigation into the Relationships Determining Ball Trajectory in Mills by Using the Physical Modelling [Volume 17, Issue 58, 2019, Pages 203-214]
  • Hesamian, Gholamreza A Proposed Method for Fuzzy Ranking in Multi-Attribute Decision-Making in Type-2 Fuzzy Environments [Volume 17, Issue 59, 2019, Pages 47-65]
  • Hesami Naghshbandy, Ali Solving Transmission Expansion Planning problem to Mitigate Cascading Failure Impacts using Transmission Network Vulnerability Analysis and Assessment approach [Volume 17, Issue 58, 2019, Pages 143-157]
  • Heydarnezhad, Elahe Robust optimization of a discrete time-cost-environment trade-off problem by considering uncertainty in time and cost [Volume 17, Issue 58, 2019, Pages 215-232]
  • Hoseinalizadeh Toni, Morteza Free vibration analysis of semi-rigid frames with elastic rotational restraints and inhomogeneous members [Volume 17, Issue 58, 2019, Pages 187-202]

I

  • Iravani, Mostafa Modeling of Polymer Associated Low Salinity Waterflooding by Fractional Flow Theory [Volume 17, Issue 56, 2019, Pages 213-222]

J

  • Jafarian, Farshid Determination of Johnson-Cook equation constants for simulation of machining process using the optimization algorithm [Volume 17, Issue 57, 2019, Pages 315-325]
  • Jahangiri, Ali Modeling the one-dimensional inverse heat transfer problem using a Haar wavelet collocation approach [Volume 17, Issue 56, 2019, Pages 293-302]
  • Jahangiri, Ali Strength analysis of the horizontal stabilator torque box of time-worn aircraft in order to estimate the remaining life and its lifetime by the finite element method [Volume 17, Issue 56, 2019, Pages 389-405]
  • Jalilian, Alireza Identification of Harmonic Order Effective in Neutral Power Losses by Matrix Pencil Method [Volume 17, Issue 58, 2019, Pages 159-170]

K

  • Kamyab, ebadollah Combined preventive and predictive maintenance model of power transformers (Case study: Khorasan Regional Electricity Company) [Volume 17, Issue 56, 2019, Pages 421-439]
  • Kardan, Ahmad Modeling Users’ Repost Behavior in Online Communities Using a Team of Learning Automata [Volume 17, Issue 59, 2019, Pages 195-214]
  • Karimabadi, Ali Combined preventive and predictive maintenance model of power transformers (Case study: Khorasan Regional Electricity Company) [Volume 17, Issue 56, 2019, Pages 421-439]
  • Kari Majidabad, Abbas Stackelberg-Nash Equilibrium in competitive facility location game among a franchisor and two investors [Volume 17, Issue 57, 2019, Pages 111-125]
  • Karimi, Mohammad Taghi Design, Modeling and Fabrication of an Active External Orthosis for Rehabilitation of Lower of Peolple with Disability [Volume 17, Issue 56, 2019, Pages 407-420]
  • Karimi, Zahir Numerical and Experimental Investigation on Springback of AL5083-H111 alloy Sheet in Warm U-Bending Conditions [Volume 17, Issue 56, 2019, Pages 13-21]
  • Karimipour, Arash Study of the effect of friction rotational damper, viscoelastic and TADAS on the structures seismic behaviour [Volume 17, Issue 59, 2019, Pages 87-107]
  • Kazemi, Mohammad Taghi Constitutive Model for Estimating Concrete Strength Using Ultrasonic Test Considering Mixing Ratios [Volume 17, Issue 56, 2019, Pages 367-374]
  • Keynia, Farshid A New Hybrid Intelligent Search Method to Find Global Optimal Solution for Engineering Problems [Volume 17, Issue 58, 2019, Pages 81-102]
  • Keynia, Farshid new feature selection method by a semi supervised classification algorithm for time series estimation [Volume 17, Issue 59, 2019, Pages 153-163]
  • Khalokakaie, Reza Observed and Un-Observed Covariate Effects on Baseline Hazard Rate - Case study: Jajarm Bauxite Mine [Volume 17, Issue 59, 2019, Pages 225-243]
  • Khomami Abadi, Morteza Analytical and Numerical Modeling of Stress Intensity Factor in I-Shaped Cross Sections of Cracked Beams [Volume 17, Issue 56, 2019, Pages 131-142]
  • Khorshidi, Ehsan Evaluation of pollutants and greenhouse emissions using gasoline-ethanol blends in gasoline engines [Volume 17, Issue 59, 2019, Pages 255-262]
  • Khosravian Dehkordi, Pouya Service Function Chaining Based on Grammar in Software Defined Networks [Volume 17, Issue 57, 2019, Pages 187-199]
  • Kord, Fatemeh Experimental Study and neural network modeling for prediction of refractive index of pure and binary alcohol mixtures [Volume 17, Issue 56, 2019, Pages 375-387]

L

  • Lashkarbolooki, Mostafa Prediction of surface tension of ionic liquid based on imidazolium using artificial neural network [Volume 17, Issue 58, 2019, Pages 1-13]

M

  • Maadani, Mohsen Improving the Structural Health Monitoring System in Detection of Tiny Crack Locations using Wavelet Transform and Digital Filter [Volume 17, Issue 58, 2019, Pages 305-316]
  • Mahdavi, Iraj Solving the multi-trip vehicle routing problem with time windows in urban waste management using grey wolf optimization algorithm [Volume 17, Issue 57, 2019, Pages 93-110]
  • Maleki Moghaddam, Mostafa An Investigation into the Relationships Determining Ball Trajectory in Mills by Using the Physical Modelling [Volume 17, Issue 58, 2019, Pages 203-214]
  • Mazloom, Golshan Investigation of the oxygen function in the selective oxidation of propane to acrylic acid over Mo1V0.3Te0.23Nb0.12Ox catalyst using kinetic modeling [Volume 17, Issue 57, 2019, Pages 55-68]
  • Mirabdolah Lavasani, Arash The effect of surface geometry and the fluid inside the channel wall on thermal-hydraulic performance in sinusoidal corrugated channel in the turbulent fluid flow. [Volume 17, Issue 57, 2019, Pages 273-283]
  • Mirakhorloo, Farzaneh Investigation and Prediction of Physical and Mechanical Properties of Gypsum/Rice Straw Composite Using ANFIS Model [Volume 17, Issue 58, 2019, Pages 267-278]
  • Mirbabaee, Ghasem Modelling of Distributed Energy Resources Management in Microgird using Distributed Algorithm [Volume 17, Issue 57, 2019, Pages 241-252]
  • Mirjalily, Ghasem Service Function Chaining Based on Grammar in Software Defined Networks [Volume 17, Issue 57, 2019, Pages 187-199]
  • Miroliaei, Ali Reza Investigation of effective parameters on hydrodynamics of rotating packed bed using computational fluid dynamics [Volume 17, Issue 59, 2019, Pages 35-45]
  • Moallem, Mahmoud Anomaly Detection using LSTM AutoEncoder [Volume 17, Issue 56, 2019, Pages 191-211]
  • Moayedi, Hossein Prediction of optimal mixing design for stabilized soft clay soil using Artificial Neural Networks [Volume 17, Issue 57, 2019, Pages 147-158]
  • Mobaraki, Ali Optimization of MLP Neural Network Using the FinGrain Parallel Genetic Algorithm for Breast Cancer Diagnosis [Volume 17, Issue 57, 2019, Pages 173-186]
  • Mohammadi, Samira Modeling the one-dimensional inverse heat transfer problem using a Haar wavelet collocation approach [Volume 17, Issue 56, 2019, Pages 293-302]
  • Mohseni, Mahdi Effect of Turbulence Model on Numerical Simulation of Turbulent Flow of Nanofluids in a Horizontal Pipe [Volume 17, Issue 58, 2019, Pages 279-293]
  • Monjezi, Masoud Optimization of open pit mines fleet using Simulation-based optimization method (Case study: SONGUN copper mine) [Volume 17, Issue 56, 2019, Pages 169-190]
  • Mousavi, Seyed Roohollah A fast hybrid refining optimization with sensitivity-based partitioning approach for truss structures [Volume 17, Issue 57, 2019, Pages 127-146]
  • Movafaghpour, Mohamad Ali Developing a Boundary Point Method Algorithm for Solving Linear Programming Problems with Feasible Initial Solution [Volume 17, Issue 56, 2019, Pages 85-99]
  • Movagharnejad, Kamyar Experimental Study and neural network modeling for prediction of refractive index of pure and binary alcohol mixtures [Volume 17, Issue 56, 2019, Pages 375-387]
  • Mozafari, Marzieh Stackelberg-Nash Equilibrium in competitive facility location game among a franchisor and two investors [Volume 17, Issue 57, 2019, Pages 111-125]

N

  • Naderi, Ali Improvement in the Performance of Tunneling Carbon Nanotube Field Effects Transistor in Presence of Underlap [Volume 17, Issue 59, 2019, Pages 215-224]
  • Naderi, Serveh Numerical study of low salinity water flooding for enhancing oil recovery in sandstone reservoirs by coupling fluid flow equations with geochemical reactions of ion exchange and calcite dissolution [Volume 17, Issue 57, 2019, Pages 1-13]
  • Naimi-Sadigh, Ali Stackelberg-Nash Equilibrium in competitive facility location game among a franchisor and two investors [Volume 17, Issue 57, 2019, Pages 111-125]
  • Najafi Kani, Ebrahim Investigation and Prediction of Physical and Mechanical Properties of Gypsum/Rice Straw Composite Using ANFIS Model [Volume 17, Issue 58, 2019, Pages 267-278]
  • Najibi, Amir Axisymmetric Elastic stress investigation of a 2D- FGM thick hollow cylinder with new material model [Volume 17, Issue 56, 2019, Pages 111-122]
  • Naserinejad, K Modeling of Spinning Process in High Pressure Aluminum Vessels and Investigation of Effective Parameters [Volume 17, Issue 56, 2019, Pages 303-312]
  • Nekufar, Mohamad Developing a Boundary Point Method Algorithm for Solving Linear Programming Problems with Feasible Initial Solution [Volume 17, Issue 56, 2019, Pages 85-99]
  • Nemati, Ramin Site selection by Monte Carlo method and integration with brute-force search and genetic algorithm by using image processing approach (Case study: Fuel station in Tabriz city) [Volume 17, Issue 57, 2019, Pages 27-39]
  • Nemati Keshteli, Ramezan Scheduling of jobs and maintenance activities in an unrelated parallel machines environment [Volume 17, Issue 58, 2019, Pages 233-247]
  • Nematpour keshteli, Abolfazl Numerical Investigation of the Behavior of Solidification in a Triplex Tube Heat Exchanger Containing Phase Change Material using Fin [Volume 17, Issue 57, 2019, Pages 327-338]
  • Nobil, Amirhossein Economic Order Quantity for Growing Items with Discrete Orders [Volume 17, Issue 56, 2019, Pages 123-129]
  • Noroozi Jajarm, Elaheh Investigation of the Effect of Green Double Skin Facades on Energy Consumption of High-rise Buildings in Tehran's Climatic Conditions [Volume 17, Issue 56, 2019, Pages 51-61]
  • Norouz, Mohammad Using the porous medium to improve the forced convective heat transfer in the channel and its numerical analysis with lattice Boltzmann method [Volume 17, Issue 58, 2019, Pages 28-39]
  • Nory, faramarz Robust-possibilistic optimization method at design of a pharmaceutical supply chain network under uncertainty and discount on purchase the raw material [Volume 17, Issue 58, 2019, Pages 249-266]
  • Nouri Qarahasanlou, Ali Observed and Un-Observed Covariate Effects on Baseline Hazard Rate - Case study: Jajarm Bauxite Mine [Volume 17, Issue 59, 2019, Pages 225-243]
  • Nowroozzadeh, Reza Evaluation of Chahchahe Earth Dam Behaviour during Construction and First Impoundment Stage Using the Results of Monitoring and Back Analysis [Volume 17, Issue 59, 2019, Pages 11-24]

O

  • Ommi, Fathollah Numerical Study of Staged Transverse Injection of Sonic Jets into Supersonic Crossflows behind a Step [Volume 17, Issue 56, 2019, Pages 281-291]
  • Omrani, Mehdi An Integrated Model to Develop Semi-Quantitative Scenarios Using a hybrid Method Based on Fuzzy Cognitive Map: A Case Study of Iranian Oil Production [Volume 17, Issue 56, 2019, Pages 157-168]

P

  • Pouyan, Ali Akbar Anomaly Detection using LSTM AutoEncoder [Volume 17, Issue 56, 2019, Pages 191-211]
  • Pouyan, Ali Akbar Modelling of Overlapping by Community Detection Algorithms in Social Networks: A Review [Volume 17, Issue 56, 2019, Pages 247-265]

R

  • Radmehr, Masoud Modelling of Distributed Energy Resources Management in Microgird using Distributed Algorithm [Volume 17, Issue 57, 2019, Pages 241-252]
  • Rahbar Shahrouzi, Javad Site selection by Monte Carlo method and integration with brute-force search and genetic algorithm by using image processing approach (Case study: Fuel station in Tabriz city) [Volume 17, Issue 57, 2019, Pages 27-39]
  • Rahi, Abbas Equivalent Stiffness Calculation of a Journal Bearing by Analytical Approach for Vibrational Modeling [Volume 17, Issue 59, 2019, Pages 129-139]
  • Rahimi, Saeed Simulation and evaluation of the performance of various sensor-sensing silicones to detect methane-soluble in fermentation process [Volume 17, Issue 58, 2019, Pages 329-336]
  • Rahimnejad, Maedeh Molecular dynamics simulation of interaction of the anti-cancer drug paclitaxel with the cell membrane: investigation of changes in van der Waals energy and center of mass [Volume 17, Issue 57, 2019, Pages 15-25]
  • Rahmani, Saeid An Investigation into the Relationships Determining Ball Trajectory in Mills by Using the Physical Modelling [Volume 17, Issue 58, 2019, Pages 203-214]
  • Ranjbar, Esmaeel Extraction of circuit parameters using multi-objective genetic algorithm for design of non-linearly compensated operational amplifiers [Volume 17, Issue 58, 2019, Pages 127-142]
  • Raoufinia, Marjan Development of a dynamic game theory model for analyzing competition in the oligopoly markets (Feedback Approach) [Volume 17, Issue 59, 2019, Pages 263-276]
  • Rasekh, Behnam Simulation and evaluation of the performance of various sensor-sensing silicones to detect methane-soluble in fermentation process [Volume 17, Issue 58, 2019, Pages 329-336]
  • Rastgoo, Razieh Face recognition using fine-tuning of Deep Convolutional Neural Network and transfer learning [Volume 17, Issue 58, 2019, Pages 103-111]
  • Razzaghi, Javad Analytical and Numerical Modeling of Stress Intensity Factor in I-Shaped Cross Sections of Cracked Beams [Volume 17, Issue 56, 2019, Pages 131-142]
  • Rezaeenour, Jalal Designing of a four-level closed loop Supply Chain Network with an Integration Approach for Economic, Environmental, and Social Responsibility about Employees [Volume 17, Issue 57, 2019, Pages 69-92]
  • Rezaeipanah, Amin Optimization of MLP Neural Network Using the FinGrain Parallel Genetic Algorithm for Breast Cancer Diagnosis [Volume 17, Issue 57, 2019, Pages 173-186]
  • Rezazadeh Mofradnia, soheil Simulation and evaluation of the performance of various sensor-sensing silicones to detect methane-soluble in fermentation process [Volume 17, Issue 58, 2019, Pages 329-336]
  • Riazi, Roozbeh Blood flow analysis in the circle of Willis using computed tomography scan images and fluid-structure interactions method [Volume 17, Issue 57, 2019, Pages 285-294]

S

  • Saadatinasab, Mehran Investigation of the Effect of Green Double Skin Facades on Energy Consumption of High-rise Buildings in Tehran's Climatic Conditions [Volume 17, Issue 56, 2019, Pages 51-61]
  • Sabagh Renani, Mehdi Constitutive Model for Estimating Concrete Strength Using Ultrasonic Test Considering Mixing Ratios [Volume 17, Issue 56, 2019, Pages 367-374]
  • Saeedi, Ahmad An Integrated Model to Develop Semi-Quantitative Scenarios Using a hybrid Method Based on Fuzzy Cognitive Map: A Case Study of Iranian Oil Production [Volume 17, Issue 56, 2019, Pages 157-168]
  • Salehi, Seyed Mohammad Mahdi Modelling of Overlapping by Community Detection Algorithms in Social Networks: A Review [Volume 17, Issue 56, 2019, Pages 247-265]
  • Salehin, Ali The effect of surface geometry and the fluid inside the channel wall on thermal-hydraulic performance in sinusoidal corrugated channel in the turbulent fluid flow. [Volume 17, Issue 57, 2019, Pages 273-283]
  • Sedighi, M Modeling of Spinning Process in High Pressure Aluminum Vessels and Investigation of Effective Parameters [Volume 17, Issue 56, 2019, Pages 303-312]
  • Seyyed Esfahani, Mir Mehdi Solving the multi-trip vehicle routing problem with time windows in urban waste management using grey wolf optimization algorithm [Volume 17, Issue 57, 2019, Pages 93-110]
  • Shafiei Alavijeh, Mohammad Numerical and Experimental Investigation on Springback of AL5083-H111 alloy Sheet in Warm U-Bending Conditions [Volume 17, Issue 56, 2019, Pages 13-21]
  • Shahmiri, Farid Mathematical modeling and investigating the effect of the area of the horizontal stabilizer on the stability of a single-main-rotor helicopter in forward flight [Volume 17, Issue 58, 2019, Pages 69-80]
  • Shahrjerdi, Reza Development of a dynamic game theory model for analyzing competition in the oligopoly markets (Feedback Approach) [Volume 17, Issue 59, 2019, Pages 263-276]
  • Shahrtash, S. Mohammad Solving Transmission Expansion Planning problem to Mitigate Cascading Failure Impacts using Transmission Network Vulnerability Analysis and Assessment approach [Volume 17, Issue 58, 2019, Pages 143-157]
  • Shahrtash, S. Mohammad Identification of Harmonic Order Effective in Neutral Power Losses by Matrix Pencil Method [Volume 17, Issue 58, 2019, Pages 159-170]
  • Shahsavari, Hamid Study of healing effect on mechanical behavior of a smart asphalt pavement and permanent deformations due to a moving load in the framework of finite element analysis [Volume 17, Issue 57, 2019, Pages 253-264]
  • Shariatinasab, Reza Comprehensive Modeling of Transient Analysis of Grounding System under Lightning Surges [Volume 17, Issue 59, 2019, Pages 165-177]
  • Sheykhan, Abbas An Integrated Model to Develop Semi-Quantitative Scenarios Using a hybrid Method Based on Fuzzy Cognitive Map: A Case Study of Iranian Oil Production [Volume 17, Issue 56, 2019, Pages 157-168]
  • Shojaeifard, Mohammad Study of healing effect on mechanical behavior of a smart asphalt pavement and permanent deformations due to a moving load in the framework of finite element analysis [Volume 17, Issue 57, 2019, Pages 253-264]
  • Shojasadati, Seyedabas Simulation and evaluation of the performance of various sensor-sensing silicones to detect methane-soluble in fermentation process [Volume 17, Issue 58, 2019, Pages 329-336]
  • Simjoo, Mohammad Modeling of Polymer Associated Low Salinity Waterflooding by Fractional Flow Theory [Volume 17, Issue 56, 2019, Pages 213-222]
  • Simjoo, Mohammad Numerical study of low salinity water flooding for enhancing oil recovery in sandstone reservoirs by coupling fluid flow equations with geochemical reactions of ion exchange and calcite dissolution [Volume 17, Issue 57, 2019, Pages 1-13]
  • Solgi, Saeed Strength analysis of the horizontal stabilator torque box of time-worn aircraft in order to estimate the remaining life and its lifetime by the finite element method [Volume 17, Issue 56, 2019, Pages 389-405]
  • Soltany Sadrabadi, Mohammadreza Blood flow analysis in the circle of Willis using computed tomography scan images and fluid-structure interactions method [Volume 17, Issue 57, 2019, Pages 285-294]
  • Sotoodehnia, Shima Numerical simulation of laminar forced convection flow with entropy generation analysis in a duct with two expansions - Blocked-off method [Volume 17, Issue 56, 2019, Pages 73-83]

T

  • Taghilou, Mohammad Using the porous medium to improve the forced convective heat transfer in the channel and its numerical analysis with lattice Boltzmann method [Volume 17, Issue 58, 2019, Pages 28-39]
  • Taheri, hassan Distributed spectrum sensing in rem based cognitive radio networks [Volume 17, Issue 56, 2019, Pages 223-233]
  • Taleizadeh, Ata Allah Economic Order Quantity for Growing Items with Discrete Orders [Volume 17, Issue 56, 2019, Pages 123-129]
  • Torabian, Hossein Numerical and Experimental Investigation on Springback of AL5083-H111 alloy Sheet in Warm U-Bending Conditions [Volume 17, Issue 56, 2019, Pages 13-21]

V

  • Vahidi, Bahman Molecular dynamics simulation of interaction of the anti-cancer drug paclitaxel with the cell membrane: investigation of changes in van der Waals energy and center of mass [Volume 17, Issue 57, 2019, Pages 15-25]
  • Vahidi, Bahman Blood flow analysis in the circle of Willis using computed tomography scan images and fluid-structure interactions method [Volume 17, Issue 57, 2019, Pages 285-294]
  • Vahidi, Bahman Numerical analysis of the effects of gravitational acceleration on aerosol deposition in the human trachea-bronchial airways: A 3D Computational Simulation [Volume 17, Issue 59, 2019, Pages 109-128]

Y

  • Yavari, Mohammad Supply chain network redesign to make resiliency with proposing “two-phase establishment facilities” as risk mitigation strategy [Volume 17, Issue 56, 2019, Pages 327-346]
  • Yazdian, Fatemeh Molecular dynamics simulation of interaction of the anti-cancer drug paclitaxel with the cell membrane: investigation of changes in van der Waals energy and center of mass [Volume 17, Issue 57, 2019, Pages 15-25]
  • Yazdian, Fatemeh Simulation and evaluation of the performance of various sensor-sensing silicones to detect methane-soluble in fermentation process [Volume 17, Issue 58, 2019, Pages 329-336]

Z

  • Zahedzadeh, Mostafa Numerical Study of Staged Transverse Injection of Sonic Jets into Supersonic Crossflows behind a Step [Volume 17, Issue 56, 2019, Pages 281-291]
  • Zahiroddin, Noureyeh Identification of Harmonic Order Effective in Neutral Power Losses by Matrix Pencil Method [Volume 17, Issue 58, 2019, Pages 159-170]
  • Zakariazadeh, Alireza Modelling of Distributed Energy Resources Management in Microgird using Distributed Algorithm [Volume 17, Issue 57, 2019, Pages 241-252]
  • Zamani, Behzad Service Function Chaining Based on Grammar in Software Defined Networks [Volume 17, Issue 57, 2019, Pages 187-199]
  • Zare, Mehdi Improving the Structural Health Monitoring System in Detection of Tiny Crack Locations using Wavelet Transform and Digital Filter [Volume 17, Issue 58, 2019, Pages 305-316]
  • Zolfaghari, Alireza Investigation of the Effect of Green Double Skin Facades on Energy Consumption of High-rise Buildings in Tehran's Climatic Conditions [Volume 17, Issue 56, 2019, Pages 51-61]