[1] G. Lorentzen, (1994) “Revival of Carbon Dioxide as a Refrigerant”. International Journal of Refrigeration,
vol. 17, No. 5, pp. 292-301.
[2] J. Yu, J., H. Chen, H., Y. Ren, and Y. Li, (2006) “A New Ejector Refrigeration System with an Additional Jet
Pump”. Applied Thermal Engineering, Vol. 26, No. 2, pp. 312-319.
[3] M. Nakagawa, and H. Takeuchi, (1998) “Performance of Two Phase Ejector in Refrigeration Cycle”, presented
at the Proceedings of 3rd International Conference on Multiphase Flow, France.
[4] B. Zheng, and Y. Weng, (2010) “A Combined Power and Ejector Refrigeration Cycle for Low Temperature
Heat Sources”. Solar Energy, Vol. 84, No. 5, pp. 784-791.
[5] D. Hong, G. Chen, L. Tang, and Y. He, (2011) “A Novel Ejector-Absorption Combined Refrigeration Cycle”.
International Journal of Refrigeration, Vol. 34, No.7, pp. 1596-1603.
[6] N. Al-Khalidy, (1998) “An Experimental Study of an Ejector Cycle Refrigeration Machine Operating on R113:
Etude Expérimentale D'une Machine Frigorifique à Ejecteur au R113”. International Journal of
Refrigeration, Vol. 21, No. 8, pp. 617-625.
[7] D. W. Sun, (1999) “Comparative Study of the Performance of an Ejector Refrigeration Cycle Operating with
Various Refrigerants”. Energy Conversion and Management, Vol. 40, No. 8, pp. 873-884.
[8] J. Yu, G. Tian, and Z. Xu, (2009) “Exergy Analysis of Joule–Thomson Cryogenic Refrigeration Cycle with
an Ejector”. Energy, Vol. 34, No. 11, pp. 1864-1869.
[9] R. Yapıcı, (2008) “Experimental Investigation of Performance of Vapor Ejector Refrigeration System Using
Refrigerant R123”. Energy Conversion and Management, Vol. 49, No. 5, pp. 953-961.
[10] J. Chen, and Z. Yan, (1988) “Optimal Performance of an Endoreversible-Combined Refrigeration Cycle”.
Journal of Applied Physics, Vol. 63, No. 10, pp. 4795-4798.
[11] M. Rashidi, N. Galanis, F. Nazari, A. Basiri Parsa, and L. Shamekhi, (2011) “Parametric Analysis and
oOptimization of Regenerative Clausius and Organic Rankine Cycles with Two Feedwater Heaters
Using Artificial Bees Colony and Artificial Neural Network”. Energy, Vol. 36, No. 9, pp. 5728-5740.
[12] K. Atashkari, N. Nariman-Zadeh, A. Pilechi, and A. Jamali, X. Yao, (2005) “Thermodynamic Pareto
Optimization of Turbojet Engines Using Multi-Objective Genetic Algorithms”, International Journal
of Thermal Sciences, Vol. 44, No. 11, pp. 1061-1071.
13 [ زارع، ون نی نیرزاده ) 1391 (، "طراحی هینه میدل رمایی صداهای پرهدار ا ر ش الگ ریتم هینهسازی زنی ر عست"، مجله [
.29- مهندسی م انی مدرس، سال 12 ، شماره 5، صداه 22
14 [ رودری، هیهانی نیا انگارن یس ) 1391 (، " هینهسازی د هدفه ر لید رمای از رلدا نیر اههای سی ت ررقییی"، مجله مهندسی [
.132- م انی مدرس، سال 12 ، شماره 4، صداه 120
[15] M. Rashidi, M. Ali, N. Freidoonimehr, and F. Nazari, (2013) “Parametric Analysis and Optimization of
Entropy Generation in Unsteady MHD Flow Over a Stretching Rotating Disk Using Artificial Neural
Network and Particle Swarm Optimization Algorithm”. Energy, Vol. 55, pp. 497-510.
[16] M. Rashidi, O. Anwar Bég, A. Basiri Parsa, and F. Nazari, (2011) “Analysis and Optimization of a
Transcritical Power Cycle with Regenerator Using Artificial Neural Networks and Genetic
Algorithms”, Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and
Energy, Vol. 225, No. 6, pp. 701-717.
[17] J. Wu, and J. Chan, (2009) “Faulted Gear Identification of a Rotating Machinery Based on Wavelet Transform
and Artificial Neural Network”, Expert Systems with Applications, Vol. 36, No. 5, pp. 8862-8875.
[18] J. Kennedy, and R. Eberhart, (1995) “Particle Swarm Optimization”, IEEE International Conference on
Neural Networks: Proceedings, the University of Western Australia, Perth, Western Australia.
[19] J. Yu, and Z. Du, (2010) “Theoretical Study of a Transcritical Ejector Refrigeration Cycle with Refrigerant
R143a”, Renewable Energy, Vol. 35, No. 9, pp. 2034-2039.
)