[1] P.M. Ajayan, L.S. Schadler, C. Giannaris, A. Rubio, "Single-walled carbon nanotube–polymer composites: strength and weakness", Advanced Materials, Vol. 12, No. 10, 2000, pp. 750-753.
[2] X. Gong, J. Liu, S. Baskaran, R.D. Voise, J.S. Young, "Surfactant-assisted processing of carbon nanotube/polymer composites", Chemistry of Materials, Vol. 12, No. 4, 2000, pp. 1049-1052.
[3] R. Haggenmueller, H. H. Gommans, A.G. Rinzler, J.E. Fischer, K.I. Winey, "Aligned single-wall carbon nanotubes in composites by melt processing methods", Chemical Physics Letters, Vol. 330, No. 3-4, 2000, pp. 219-225.
[4] D. Qian, E.C. Dickey, R. Andrews, T. Rantell, "Load transfer and deformation mechanisms in carbon nanotube-polystyrene composites", Applied Physics Letters, Vol. 76, 2000, pp. 2868-2870.
[5] M.S. Shaffer, A.H. Windle, "Fabrication and characterization of carbon nanotube/poly (vinyl alcohol) composites", Advanced Materials, Vol. 11, No. 11, 1999, pp. 937-941.
[6] S.J.V. Frankland, V.M. Harik, G.M. Odegard, D.W. Brenner, T.S. Gates, "The stress–strain behavior of polymer–nanotube composites from molecular dynamics simulation", Composites Science andTechnology, Vol. 63, No. 11, 2003, pp. 1655-1661.
[7] Y. Han, J. Elliott, "Molecular dynamics simulations of the elastic properties of polymer/carbon nanotube composites", Computational Materials Science, Vol. 39, No. 2, 2007, pp. 315-323.
[8] R. Zhu, E. Pan, A.K. Roy, "Molecular dynamics study of the stress–strain behavior of carbon-nanotube reinforced Epon 862 composites", Materials Science and Engineering: A, Vol. 447, No. 1-2, 2007, pp. 51-57.
[9] V.V. Mokashi, D. Qian, Y. Liu, "A study on the tensile response and fracture in carbon nanotube-based composites using molecular mechanics", Composites science and technology, Vol. 67, No. 3-4, 2007, pp. 530-540.
[10] J.L. Tsai, S.H. Tzeng, Y.T. Chiu, "Characterizing elastic properties of carbon nanotubes/polyimide nanocomposites using multi-scale simulation", Composites Part B: Engineering, Vol. 41, No. 1, 2010, pp. 106-115.
[11] S. Yang, S. Yu, W. Kyoung, D.S. Han, M. Cho, "Multiscale modeling of size-dependent elastic properties of carbon nanotube/polymer nanocomposites with interfacial imperfections", Polymer, Vol. 53, No. 2, 2012, pp. 623-633.
[12] S. Yang, S. Yu, J. Ryu, J.M. Cho, W. Kyoung, D.S. Han, M. Cho, "Nonlinear multiscale modeling approach to characterize elastoplastic behavior of CNT/polymer nanocomposites considering the interphase and interfacial imperfection", International Journal of Plasticity, Vol.41, 2013, pp. 124–146.
[13] S. Yang, S. Yu, M. Cho, "Influence of Thrower-Stone-Wales defects on the interfacial properties of carbon nanotube/polypropylene composites by a molecular dynamics approach", Carbon, Vol.55, 2013, pp. 133– 143.
[14] M. Bohlén, K. Bolton, "Molecular dynamics studies of the influence of single wall carbon nanotubes on the mechanical properties of Poly (vinylidene fluoride)", Computational Materials Science, Vol. 68, 2013, pp. 73-80.
[15] C. Li, T.W. Chou, "Multiscale modeling of compressive behavior of carbon nanotube/polymer composites", Composites science and technology, Vol. 66, No. 14, 2006, pp. 2409-2414.
[16] S.K. Georgantzinos, G.I. Giannopoulos, N.K. Anifantis, "Investigation of stress–strain behavior of single walled carbon nanotube/rubber composites by a multi-scale finite element method", Theoretical and Applied Fracture Mechanics, Vol. 52, No. 3, 2009, pp. 158-164.
[17] G.I. Giannopoulos, S.K. Georgantzinos, N.K. Anifantis, "A semi-continuum finite element approach to evaluate the Young’s modulus of single-walled carbon nanotube reinforced composites", Composites Part B: Engineering, Vol. 41, No. 8, 2010, pp. 594-601.
[18] M.M. Shokrieh, R. Rafiee, "On the tensile behavior of an embedded carbon nanotube in polymer matrix with non-bonded interphase region", Composite Structures, Vol. 92, No. 3, 2010, pp. 647-652.
[19] M.M. Shokrieh, R. Rafiee, "Investigation of nanotube length effect on the reinforcement efficiency in carbon nanotube based composites", Composite Structures, Vol. 92, No. 10, 2010, pp. 2415-2420.
[20] J.M. Wernik, S.A. Meguid, "Coupling atomistics and continuum in solids: status, prospects, and challenges", International Journal of Mechanics and Materials in Design, Vol. 5, 2009, pp. 79-110.
[21] J.M. Wernik, S.A. Meguid, "Multiscale modeling of the nonlinear response of nano-reinforced polymers", ActaMechanica, Vol. 217, No. 1-2, 2011, pp. 1-16.
[22] S.A. Meguid, J.M. Wernik, Z.Q. Cheng, "Atomistic-based continuum representation of the effective properties of nano-reinforced epoxies", International Journal of Solids and Structures, Vol. 47, No. 13, 2010, pp. 1723-1736.
[23] J.M. Wernik, B.J. Cornwell-Mott, S.A. Meguid, "Determination of the interfacial properties of carbon nanotube reinforced polymer composites using atomistic-based continuum model", International Journal of Solids and Structures, Vol. 49, No. 13, 2012, pp. 1852-1863.
[24] M. Valero, B. Esteban, R. Peläez, and L.J. Rodrïguez, "Naproxen: hydroxypropyl-β-cyclodextrin: polyvinylpyrrolidone ternary complex formation", Journal of Inclusion Phenomena and Macrocyclic Chemistry, Vol. 48, No. 3-4, 2004, pp. 157-163.
[25] R. Ansari, S. Rouhi, "Atomistic finite element model for axial buckling of single-walled carbon nanotubes", Physica E: Low-dimensional Systems and Nanostructures, Vol. 43, No. 1, 2010, pp. 58-69.
[26] M.P. Allen, D.J. Tildesley, "Computer simulation of liquids" Oxford university press, 1989.
[27] ANSYS Inc. Theory manual. SAS IP Inc.
)