[1] D. Carle, G. Blount, "The Suitability of Aluminum as an Alternative Material for Car Bodies", Journal of Materials and Design, Vol. 20, Issue 5, 1999, pp. 267–272.
[2] F. Pourboghrat, E. Chu, "Springback in Plane Strain Stretch/Draw Sheet Forming", International Journal of Mechanical Sciences, Vol. 37, Issue 3, 1995, pp. 327–341.
[3] F. Pourboghrat, E. Chu, "Prediction of Springback and Side Wall Curl in 2-D Draw Bending", Journal of Materials Processing Technology, Vol. 50, Issues 1–4, 1995, pp. 361–374.
[4] M. Samuel, "Experimental and Numerical Prediction of Springback and Side Wall Curl in U-Bending of Anisotropic Sheet Metals", Journal of Materials Processing Technology, Vol. 105, No. 3, 2000, pp. 382–393.
[5] G. Liu, W. Xu, Y. Bao, "Variable Blank Holder Force in U-Shaped Part Forming for Eliminating Springback Error", Journal of Materials Processing Technology, Vol. 120, Issues 1–3, 2002, pp. 259–264.
[6] I. Ragai, D. Lazim, A. Nemes, "Anisotropy and Springback in Draw-Bending of Stainless Steel 410: Experimental and Numerical Study", Journal of Materials Processing Technology, V. 166, Issue 1, 2005, pp. 116–127.
[7] L. Papeleux, J.P. Ponthol, "Finite Element Simulation of Springback in Sheet Metal Forming", Journal of Materials Processing Technology, Vols. 125–126, 2002, pp. 785–791.
[8] L.C. Sousa, C.F. Castro, C.A.C. Antonio, "Optimal Design of V and U Bending Processes Using Genetic Algorithms", Journal of Materials Processing Technology, V. 172, Issue 1, 2006, pp. 35–41.
[9] T. Hama, T. Nagata, C. Teodosiu, A. Makinouchi, H. Takuda, "Finite Element Simulation of Springback in Sheet Metal Forming Using Local Interpolation for Tool Surfaces", International Journal of Mechanical Sciences, Vol. 50, Issue 2, 2008, pp. 175–192.
[10] Y.H.Moon, S.S. Kang, J.R. Cho, T.G. Kim, "Effect of Tool Temperature on the Reduction of the Springback of Aluminum Sheets", Journal of Materials Processing Technology, Vol. 132, Issues 1–3, 2003, pp. 365–368.
[11] J. Yanagimoto, K. Oyamada, "Springback-Free Isothermal Forming of High- Strength Steel Sheets and Aluminum Alloy Sheets Under Warm and Hot Forming Conditions", ISIJ International, Vol. 46, Issue 9, 2006, pp. 1324–1328.
[12] J. Yanagimoto, K. Oyamada, "Mechanism of Springback-Free Bending of High Strength Steel Sheets Under Warm Forming Conditions", Journal Annals of the CIRP, Vol. 56, Issue 1, 2007, pp. 265–268.
[13] J. Yanagimoto, K. Oyamada, T. Nakagawa, "Springback of High Strength Steels After Hot and Warm Sheet Forming", Journal Annals of the CIRP, Vol. 54, Issue 1, 2005, pp. 213–216.
[14] S.H. Kim, M. Koc, "Numerical Investigations on Springback Characteristics of Aluminum Sheet Metal Alloys in Warm Forming Conditions", Journal of Materials Processing Technology, Vol. 204, Issues 1–3, 2008, pp. 370–383.
[15] F. Ozturk, S. Toros, S. Kilic, "Tensile and Springback Behavior of DP600 Advanced High Strength Steel at Warm Temperature", Journal of Iron and Steel Research, Vol. 16, Issue 6, 2009, pp. 41–46.
[16] D.S. Yang, W. Liu, G.J. Hu, J. Zhou, Z. Su, "Study on Hot Forming Process and Springback of Ultra-High Strength Steel Based on ABAQUS Advanced Materials Research", Journal of Advanced Materials Research, Vols. 482–484, 2012, pp. 2430–2437.
[17] F. Ozturk, S. Toros, S. Kilic, "Tensile Deformation Behavior of AA5083-H111 at Cold and Hot Temperatures", International Journal of Material Research, Vol. 101, Issue 9, 2010, pp. 1172–1179.
[18] D.L. Olson, T.A. Siewert, S. Liu, G.R. Edwards, "Welding, Brazing, and Soldering", ASM International, USA, 2007.
[19] A. Bejan, A.D. Kraus, "Heat transfer handbook", Vol. 1, John Wiley & Sons, New Jersey, 2003.
)
