Journal of Modeling in Engineering

Journal of Modeling in Engineering

Cogeneration system based on combined Brayton and inverse Brayton cycle based on biogas fuel

Document Type : Mechanics article

Authors
1 دانشگاه محقق اردبیلی
2 Associate professor Department of Mechanical Engineering, University of Mohaghegh Ardabili, Ardabil, Iran
3 UMA
Abstract
of fossil fuels, as well as environmental restrictions, the demand for high-efficiency energy systems has risen. For this reason, there is a growing tendency to use combined cycle and cogeneration. In the current research, Brayton and reverse Brayton units have been employed as stimuli in the cogeneration system. In this study, a system for the simultaneous production of power and fresh water, operating on biogas fuel, is presented. The performance of the combined system has been evaluated in terms of the first and second laws of thermodynamics. Additionally, to examine the system's behavior with varying input parameters, a parametric study has been conducted. Also acc ording to the obtaine d results, the presented system has the a bility to produce 1031kW of power and 0.8498 m^3/h of fresh water. The energy and exergy efficiency of this system are calculated as 35.65% and 36.21%, , respectively.
DOI: https: // doi.org /
Keywords
Subjects


Articles in Press, Accepted Manuscript
Available Online from 22 January 2025

  • Receive Date 08 May 2024
  • Revise Date 04 September 2024
  • Accept Date 22 September 2024