Numerical simulation of laminar forced convection flow with entropy generation analysis in a duct with two expansions - Blocked-off method

Document Type : Mechanics article

Authors

1 Young Researchers and Elite Club, Sirjan Branch, Islamic Azad University, Sirjan, Iran

2 Department of Mechanical Engineering, Sirjan University of Technology, Sirjan, Iran

Abstract

In the present paper, numerical simulations of laminar forced convection flow and entropy generation analysis in a 2-D duct with two sudden expansions are investigated. These two expansions are created by four inclined backward facing steps and beget the separation flows and vortex regions. The vortex regions have the significant effects on the heat transfer rates and flow irreversibility. The inclination angle of steps is one of effective parameters on the control of the separation flows, heat transfer rates and flow irreversibility. In this paper, after calculation of velocity fields and temperature distributions, the effect of the step inclination angle on the separated flows, Nusselt number, friction coefficient, entropy generation number and Bejan number is studied. To obtain the temperature distributions and velocity fields, the set of governing equations including mass, momentum and energy equations are solved by the finite volume methods and computational fluid dynamic (CFD) techniques. For simulating the inclined surfaces of steps in Cartesian coordinates, the blocked-off method is used. Also, thermodynamic second law analysis is employed to calculate the entropy generation and flow irreversibility. Finally, the effect of the Brickman number on the entropy generation number and Bijan number is investigated graphically.

Keywords

Main Subjects


[1] Y.L. Tsay, T.S. Chang, and J.C. Cheng, "Heat Transfer Enhancement of Backward-Facing Step Flow in a Channel by Using Baffle Installation on Channel Wall", ACTA Mechanica, Vol. 174, Issue 1–2, 2005, pp. 63–76.
[2] E. Erturk, "Numerical Solutions of 2-D Steady Incompressible Flow over a Backward Facing Step, Part I: High Reynolds Number Solutions", Computers & Fluids, Vol. 37, Issue 6, 2008, pp. 633–655.
[3] J.H. Nie, Y.T. Chen, and H.T. Hsieh, "Effects of a Baffle on Separated Convection Flow adjacent to Backward-Facing Step", International Journal of Thermal Sciences, Vol. 48, Issue 3, 2009, pp. 618–625.
[4] H.F. Oztop, K.S. Mushatet, and İ. Yılmaz, "Analysis of Turbulent Flow and Heat Transfer over a Double Forward Facing Step with Obstacles", International Communications in Heat and Mass Transfer, Vol. 39, Issue 9, 2012, pp. 1395–1403.
[5] M. Atashafrooz, and S.A. Gandjalikhan Nassab, "Simulation of Three-Dimensional Laminar Forced Convection Flow of a Radiating Gas over an Inclined Backward-Facing Step in a Duct under Bleeding Condition", Institution of Mechanical Engineers, Part C, Journal of Mechanical Engineering Science, Vol. 227, No. 2, 2012, pp. 332–345.
[6] F. Selimefendigil, and H.F. Oztop, "Numerical Analysis of Laminar Pulsating Flow at a Backward Facing Step with an Upper Wall Mounted Adiabatic Thin Fin", Computers & Fluids, Vol. 88, 2013, pp. 93–107.
[7] M. Atashafrooz, S.A. Gandjalikhan Nassab, and K. Lari, "Numerical Analysis of Interaction Between Non-Gray Radiation and Forced Convection Flow over a Recess Using the Full-Spectrum K-Distribution Method", Heat and Mass Transfer, Vol. 52, No. 2, 2016, pp. 361–377.
[8] A.S. Kherbeet, M.R. Safaei, H.A. Mohammed, B.H. Salman, H.E. Ahmed, O.A. Alawi, and M.T. Al-Asadi, "Heat Transfer and Fluid Flow over Microscale Backward and Forward Facing Step: A Review", International Communications in Heat and Mass Transfer, Vol. 76, 2016, pp. 237–244.
[9] M. Atashafrooz, S.A. Gandjalikhan Nassab, and K. Lari, "Coupled Thermal Radiation and Mixed Convection Step Flow of Non-gray Gas", Journal of Heat Transfer (ASME), Vol. 138, No. 7, 2016.
[10] A. Nouri-Borujerdi, and A. Moazezi, "Investigation of Obstacle Effect to Improve Conjugate Heat Transfer in Backward Facing Step Channel Using Fast Simulation of Incompressible Flow", Heat and Mass Transfer, Vol. 54, Issue 1, 2018, pp. 135–150.
[11] A. Bejan, Entropy Generation Through Heat and Fluid Flow, John Wiley & Sons Inc., Canada, 1994.
[12] A. Bejan, Entropy Generation Minimization, CRC Press, Boca Raton, New York, USA, 1996.
[13] I. Dagtekin, H.F. Oztop, and A. Bahloul, "Entropy Generation for Natural Convection in Γ-shaped Enclosures", International Communications in Heat and Mass Transfer, Vol. 34, Issue 4, 2007, pp. 502–510.
[14] H.M.S. Bahaidarah, and A.Z. Sahin, "Thermodynamic Analysis of Fluid Flow in Channels with Wavy Sinusoidal Walls", Thermal Science, Vol. 17, No. 3, 2013, pp. 813–822.
[15] R.K. Nayak, S. Bhattacharyya, I. Pop, "Heat Transfer and Entropy Generation in Mixed Convection of a Nanofluid within an Inclined Skewed Cavity", International Journal of Heat and Mass Transfer, Vol. 102, 2016, pp. 596–609.
[16] M. Mamourian, K.M. Shirvan, R. Ellahi, and A.B. Rahimi, "Optimization of Mixed Convection Heat Transfer with Entropy Generation in a Wavy Surface Square Lid-driven Cavity by Means of Taguchi Approach", International Journal of Heat and Mass Transfer, Vol. 102, 2016, pp. 544–554.
[17] H.F. Oztop, L. Kolsi, A. Alghamdi, N. Abu-Hamdeh, M.N. Borjini, and H.B. Aissia, "Numerical Analysis of Entropy Generation due to Natural Convection in Three-dimensional Partially Open Enclosures", Journal of the Taiwan Institute of Chemical Engineers, Vol. 75, 2017, pp. 131–140.
[18] A. Bahrami, and S.A. Gandjalikhan Nassab, "Study of Entropy Generation in Laminar Forced Convection Flow over a Forward-Facing Step in a Duct", International Review of Mechanical Engineering, Vol. 4, No. 4, 2010, pp. 399–404.
[19] E. Abu-Nada, "Numerical Prediction of Entropy Generation in Separated Flows", Entropy, Vol.7, No. 4, 2005, pp. 234–252.
[20] E. Abu-Nada, "Investigation of Entropy Generation over a Backward Facing Step under Bleeding Conditions", Energy Conversion and Management, Vol. 49, Issue 11, 2008, pp. 3237–3242.
[21] M. Atashafrooz, S.A. Gandjalikhan Nassab, and A.B. Ansari, "Numerical Investigation of Entropy Generation in Laminar Forced Convection Flow over Inclined Backward and Forward Facing Steps in a Duct under Bleeding Condition", Thermal Science, Vol. 18, No. 2, 2014, pp. 479–492.
[22] M. Atashafrooz, S.A. Gandjalikhan Nassab, and A.B. Ansari, "Numerical Study of Entropy Generation in Laminar Forced Convection Flow over Inclined Backward and Forward Facing Steps in a Duct", International Review of Mechanical Engineering (I.RE.M.E.), Vol. 5, No. 5, 2011, pp. 898–907.
[23] S.V. Patankar, and D.B. Spalding, "A Calculation Procedure for Heat, Mass and Momentum Transfer in Three-dimensional Parabolic Flows", International Journal of Heat and Mass Transfer, Vol. 15, Issue 10, 1972, pp. 1787–1806.
[24] S.V. Patankar, Numerical Heat Transfer and Fluid Flow, Taylor & Francis, Philadelphia, Penn., USA, Chapter 7, 1981.
[25] D.Y. Byun, S.W. Baek, and M.Y. Kim, "Investigation of Radiative Heat Transfer in Complex Geometries using Blocked-off, Multiblock, and Embedded Boundary Treatments", Numerical Heat Transfer—Part A, Vol. 43, Issue 8, 2003, pp. 807–825.
[26] M. Atashafrooz, and S.A. Gandjalikhan Nassab, "Numerical Analysis of Laminar Forced Convection Recess Flow with Two Inclined Steps Considering Gas Radiation Effect", Computers and Fluids, Vol. 66, 2012, pp. 167–176.
[27] M. Atashafrooz, and S.A. Gandjalikhan Nassab, "Combined Heat Transfer of Radiation and Forced Convection Flow of Participating Gases in a Three-dimensional Recess", Journal of Mechanical Science and Technology, Vol. 26, Issue 10, 2012, pp. 3357–3368.
[28] A.B. Ansari, and S.A. Gandjalikhan Nassab, "Numerical Analysis of Laminar Forced Convection Flow of a Radiating Gas over an Inclined Forward Facing Step", International Review of Mechanical Engineering, Vol. 5, No. 1, 2011, pp. 121–127.
[29] A.B. Ansari, and S.A. Gandjalikhan Nassab, "Forced Convection of Radiating Gas over an Inclined Backward Facing Step Using the Blocked-off Method", Thermal Science, Vol. 17, No. 3, 2013, pp. 773–786.