Journal of Modeling in Engineering

Journal of Modeling in Engineering

Keyword Index
A
  • Abaqus software SIMULATION AND INVESTIGATION OF RING COMPRESSION TEST FOR FRICTION MEASURMENT IN HOT FORGING PROCESS [Volume 10, Issue 31, 2012, Pages 59-67]
  • Aero-hydro-elastic AERO-HYDRO-ELASTIC SIMULATION OF TENSION LEG PLATFORM WIND TURBINE [Volume 10, Issue 30, 2012, Pages 1-17]
  • Airplane Main Gear NUMERICAL ANALYSIS EFFECT OF AIRCRAFT MAIN GEARS ON THE CRITICAL ZONES OF RUNWAY RIGID PAVEMENT [Volume 10, Issue 29, 2012, Pages 61-70]
  • Airport Runway NUMERICAL ANALYSIS EFFECT OF AIRCRAFT MAIN GEARS ON THE CRITICAL ZONES OF RUNWAY RIGID PAVEMENT [Volume 10, Issue 29, 2012, Pages 61-70]
  • Aluminum Based Nanocomposite STATISTICAL MODELING OF SYNTHESIZING OF ALUMINUM BASED NANOCOMPSOITE PARTICLES REINFORCED BY SiC VIA MECHANICAL ALLOYING PROCESS [Volume 10, Issue 29, 2012, Pages 43-60]
  • Artificial Neural Networks MODELING AND ESTIMATION OF PLASTIC HINGE LENGTH OF RC COLUMNS USING ARTIFICIAL NEURAL NETWORKS [Volume 10, Issue 29, 2012, Pages 1-17]
  • Aspect Ratio FLOW BEHAVIOR AND THERMAL PERFORMANCE OF DOUBLE LID-DRIVEN CAVITY SUBJECTED TO NANOFLUID WITH VARIABLE PROPERTIES [Volume 10, Issue 30, 2012, Pages 43-60]
  • AUSM+ SHAPE OPTIMIZATION OF SUPERSONIC WIND TUNNEL DIFFUSER USING GENETIC ALGORITHM [Volume 10, Issue 28, 2012, Pages 19-29]
  • Axisymmetric ANALYSIS OF AXISYMMETRIC SHEET HYDROFORMING PROCESS [Volume 10, Issue 31, 2012, Pages 49-57]
B
  • Behavior Factor BEHAVIOR FACTOR OF STEEL DUAL FRAMES WITH LARGE- SCALED CONCENTRICALLY BRACING SYSTEMS [Volume 10, Issue 31, 2012, Pages 1-13]
  • Benders decomposition SHORT-TERM HYDROTHERMAL COORDINATION CONSIDERING SECURITY CONSTRAINTS AND VOLTAGE STABILITY [Volume 10, Issue 28, 2012, Pages 53-67]
  • Bi-directional Evolutionary Structural Optimization SHAPE OPTIMIZATION OF CONTACT PROBLEMS SUBJECT TO MULTIPLE LOAD CASES USING BI-DIRECTIONAL EVOLUTIONARY STRUCTURAL OPTIMIZATION [Volume 10, Issue 30, 2012, Pages 77-86]
  • Bimetal Sheet UPPER BOUND ANALYSIS OF BIMETAL SHEET EXTRUSION PROCESS THROUGH TAPER DIES [Volume 10, Issue 28, 2012, Pages 43-51]
  • Blast loading ANALYTICAL SOLTION AND SIMULATION OF DYNAMIC STRESS INTENSITY FACTOR AND STRESS FILED DETERMINATION ON THE CRACKED PLATE UNDER BLAST LOADING [Volume 10, Issue 29, 2012, Pages 71-80]
  • Block Diagram MODELING AND NUMERICAL ANALYSIS OF THYRISTOR BASED CONVERTERS BY MULTI-VARIABLE RUNGE-KUTTA ALGORITHM [Volume 10, Issue 29, 2012, Pages 33-42]
C
  • C2 Coefficient INVESTIGATION OF DETERIORATION OF HYSTERETIC LOOPS IN NONLINEAR STATIC ANALYSIS (PUSHOVER) FOR SPECIAL MOMENT RESISTING FRAME WITH SHEAR WALLS [Volume 10, Issue 30, 2012, Pages 33-41]
  • Central Hole Drilling Method EFFECTS OF END FORM OF T-JOINT WELDS ON FORMATION OF RESIDUAL STRESSES [Volume 10, Issue 29, 2012, Pages 81-90]
  • Combustion chamber NUMERICAL SIMULATION OF SGT-600 GAS TURBINE COMBUSTOR AND FLOW FIELD UNDER OPERATION CONDITION [Volume 10, Issue 31, 2012, Pages 25-35]
  • Competitive Supply Chain A COORDINATION MODEL FOR A COMPETITIVE SUPPLY CHAIN USING COOPERATIVE AND NON-COOPERATIVE GAME THEORY [Volume 10, Issue 29, 2012, Pages 19-31]
  • Complete and Non-Complete Weld EFFECTS OF END FORM OF T-JOINT WELDS ON FORMATION OF RESIDUAL STRESSES [Volume 10, Issue 29, 2012, Pages 81-90]
  • Compressive Strength of Concrete ANALYTICAL STUDY OF CONCRETE-FILLED DOUBLE SKIN STEEL TUBULAR COLUMNS UNDER INTERACTION OF BENDING MOMENT AND AXIAL LOAD [Volume 10, Issue 31, 2012, Pages 15-23]
  • Concrete-filled Tubular Column ANALYTICAL STUDY OF CONCRETE-FILLED DOUBLE SKIN STEEL TUBULAR COLUMNS UNDER INTERACTION OF BENDING MOMENT AND AXIAL LOAD [Volume 10, Issue 31, 2012, Pages 15-23]
  • Confined Concrete ANALYTICAL STUDY OF CONCRETE-FILLED DOUBLE SKIN STEEL TUBULAR COLUMNS UNDER INTERACTION OF BENDING MOMENT AND AXIAL LOAD [Volume 10, Issue 31, 2012, Pages 15-23]
  • Contact Problems SHAPE OPTIMIZATION OF CONTACT PROBLEMS SUBJECT TO MULTIPLE LOAD CASES USING BI-DIRECTIONAL EVOLUTIONARY STRUCTURAL OPTIMIZATION [Volume 10, Issue 30, 2012, Pages 77-86]
  • Cooperative Game A COORDINATION MODEL FOR A COMPETITIVE SUPPLY CHAIN USING COOPERATIVE AND NON-COOPERATIVE GAME THEORY [Volume 10, Issue 29, 2012, Pages 19-31]
  • Coordination A COORDINATION MODEL FOR A COMPETITIVE SUPPLY CHAIN USING COOPERATIVE AND NON-COOPERATIVE GAME THEORY [Volume 10, Issue 29, 2012, Pages 19-31]
D
  • Differential Operator MODELING AND NUMERICAL ANALYSIS OF THYRISTOR BASED CONVERTERS BY MULTI-VARIABLE RUNGE-KUTTA ALGORITHM [Volume 10, Issue 29, 2012, Pages 33-42]
  • Ductility Reduction Factor BEHAVIOR FACTOR OF STEEL DUAL FRAMES WITH LARGE- SCALED CONCENTRICALLY BRACING SYSTEMS [Volume 10, Issue 31, 2012, Pages 1-13]
  • Dynamic Stress Intensity Factor ANALYTICAL SOLTION AND SIMULATION OF DYNAMIC STRESS INTENSITY FACTOR AND STRESS FILED DETERMINATION ON THE CRACKED PLATE UNDER BLAST LOADING [Volume 10, Issue 29, 2012, Pages 71-80]
E
  • Eddy Lifetime Constant NUMERICAL STUDY OF THE EFFECTIVE PARAMETERS ON THE PERFORMANCE OF EDDY INTERACTION MODEL FOR A WAVE-PLATE MIST ELIMINATOR [Volume 10, Issue 31, 2012, Pages 69-84]
  • Energy recovery MODELING OF ROTARY REGENERATORS [Volume 10, Issue 28, 2012, Pages 9-18]
  • Extrusion UPPER BOUND ANALYSIS OF BIMETAL SHEET EXTRUSION PROCESS THROUGH TAPER DIES [Volume 10, Issue 28, 2012, Pages 43-51]
  • Extrusion Force UPPER BOUND ANALYSIS OF BIMETAL SHEET EXTRUSION PROCESS THROUGH TAPER DIES [Volume 10, Issue 28, 2012, Pages 43-51]
F
  • FCC MODELLING OF FCC PROCESS BASED ON CLUSTER SIZE VARIATION ALONG THE RISER [Volume 10, Issue 30, 2012, Pages 87-97]
  • Finite element ANALYTICAL SOLTION AND SIMULATION OF DYNAMIC STRESS INTENSITY FACTOR AND STRESS FILED DETERMINATION ON THE CRACKED PLATE UNDER BLAST LOADING [Volume 10, Issue 29, 2012, Pages 71-80]
  • Floating Wind Turbine AERO-HYDRO-ELASTIC SIMULATION OF TENSION LEG PLATFORM WIND TURBINE [Volume 10, Issue 30, 2012, Pages 1-17]
  • Fluidized Bed MODELLING OF FCC PROCESS BASED ON CLUSTER SIZE VARIATION ALONG THE RISER [Volume 10, Issue 30, 2012, Pages 87-97]
  • Forming pressure ANALYSIS OF AXISYMMETRIC SHEET HYDROFORMING PROCESS [Volume 10, Issue 31, 2012, Pages 49-57]
  • Fracture ANALYTICAL SOLTION AND SIMULATION OF DYNAMIC STRESS INTENSITY FACTOR AND STRESS FILED DETERMINATION ON THE CRACKED PLATE UNDER BLAST LOADING [Volume 10, Issue 29, 2012, Pages 71-80]
  • Fracture Analysis DEVELOPMENT OF A REVERSE ENGINEERING PROCEDURE FOR UPGRADING AND MANUFACTURING OF LEGACY MECHANICAL AND STRUCTURAL COMPONENTS [Volume 10, Issue 28, 2012, Pages 69-82]
  • Friction SIMULATION AND INVESTIGATION OF RING COMPRESSION TEST FOR FRICTION MEASURMENT IN HOT FORGING PROCESS [Volume 10, Issue 31, 2012, Pages 59-67]
  • Frictional Calibration Curve SIMULATION AND INVESTIGATION OF RING COMPRESSION TEST FOR FRICTION MEASURMENT IN HOT FORGING PROCESS [Volume 10, Issue 31, 2012, Pages 59-67]
G
  • Genetic algorithm MODELING OF THRUST AND SPECIFIC FUEL CONSUMPTION FOR A TURBOFAN ENGINE VIA GMDH-TYPE NEURAL NETWORKS [Volume 10, Issue 28, 2012, Pages 1-7]
  • Genetic algorithm SHAPE OPTIMIZATION OF SUPERSONIC WIND TUNNEL DIFFUSER USING GENETIC ALGORITHM [Volume 10, Issue 28, 2012, Pages 19-29]
  • GMDH-type Neural Networks MODELING OF THRUST AND SPECIFIC FUEL CONSUMPTION FOR A TURBOFAN ENGINE VIA GMDH-TYPE NEURAL NETWORKS [Volume 10, Issue 28, 2012, Pages 1-7]
H
  • Heat transfer EVALUATION OF MIXED CONVECTION HEAT TRANSFER AND THERMAL CHARACTERISTIC AROUND TWO HEATED OBSTACLES IN INCLINED SQUARE CAVITY SUBJECTED TO A NANOFLUID [Volume 10, Issue 28, 2012, Pages 31-42]
  • Heat transfer FLOW BEHAVIOR AND THERMAL PERFORMANCE OF DOUBLE LID-DRIVEN CAVITY SUBJECTED TO NANOFLUID WITH VARIABLE PROPERTIES [Volume 10, Issue 30, 2012, Pages 43-60]
  • Hot Forging Process SIMULATION AND INVESTIGATION OF RING COMPRESSION TEST FOR FRICTION MEASURMENT IN HOT FORGING PROCESS [Volume 10, Issue 31, 2012, Pages 59-67]
  • Hysteresis Loops INVESTIGATION OF DETERIORATION OF HYSTERETIC LOOPS IN NONLINEAR STATIC ANALYSIS (PUSHOVER) FOR SPECIAL MOMENT RESISTING FRAME WITH SHEAR WALLS [Volume 10, Issue 30, 2012, Pages 33-41]
L
  • Large-scaled Concentrically Bracing BEHAVIOR FACTOR OF STEEL DUAL FRAMES WITH LARGE- SCALED CONCENTRICALLY BRACING SYSTEMS [Volume 10, Issue 31, 2012, Pages 1-13]
  • Lj Index SHORT-TERM HYDROTHERMAL COORDINATION CONSIDERING SECURITY CONSTRAINTS AND VOLTAGE STABILITY [Volume 10, Issue 28, 2012, Pages 53-67]
  • Lubricant SIMULATION AND INVESTIGATION OF RING COMPRESSION TEST FOR FRICTION MEASURMENT IN HOT FORGING PROCESS [Volume 10, Issue 31, 2012, Pages 59-67]
M
  • Mass of Accelerometer CORRECTION OF MASS-LOADING EFFECTS OF ACCELEROMETERS ON THE MEASURED FRFs USING OPTIMIZED MASS CHANGE ALGORITHM [Volume 10, Issue 30, 2012, Pages 19-31]
  • Material constitutive model THE MATHEMATICAL FORM OF MATERIAL CONSTITUTIVE LAWS APPLICABLE FOR MODELING OF METAL PLASTIC BEHAVIOR IN SIMULATION OF MACHINING [Volume 10, Issue 31, 2012, Pages 37-48]
  • Mathematical modeling MODELING OF ROTARY REGENERATORS [Volume 10, Issue 28, 2012, Pages 9-18]
  • Matrix MODELING OF ROTARY REGENERATORS [Volume 10, Issue 28, 2012, Pages 9-18]
  • Mechanical alloying STATISTICAL MODELING OF SYNTHESIZING OF ALUMINUM BASED NANOCOMPSOITE PARTICLES REINFORCED BY SiC VIA MECHANICAL ALLOYING PROCESS [Volume 10, Issue 29, 2012, Pages 43-60]
  • Metal machining THE MATHEMATICAL FORM OF MATERIAL CONSTITUTIVE LAWS APPLICABLE FOR MODELING OF METAL PLASTIC BEHAVIOR IN SIMULATION OF MACHINING [Volume 10, Issue 31, 2012, Pages 37-48]
  • Mixed convection EVALUATION OF MIXED CONVECTION HEAT TRANSFER AND THERMAL CHARACTERISTIC AROUND TWO HEATED OBSTACLES IN INCLINED SQUARE CAVITY SUBJECTED TO A NANOFLUID [Volume 10, Issue 28, 2012, Pages 31-42]
  • Modal Analysis CORRECTION OF MASS-LOADING EFFECTS OF ACCELEROMETERS ON THE MEASURED FRFs USING OPTIMIZED MASS CHANGE ALGORITHM [Volume 10, Issue 30, 2012, Pages 19-31]
  • Monte Carlo simulation WIND FARM EFFECTS ON TOTAL TRANSFER CAPABILITY [Volume 10, Issue 30, 2012, Pages 61-75]
  • Multi-body Dynamics AERO-HYDRO-ELASTIC SIMULATION OF TENSION LEG PLATFORM WIND TURBINE [Volume 10, Issue 30, 2012, Pages 1-17]
  • Multiple Load Cases SHAPE OPTIMIZATION OF CONTACT PROBLEMS SUBJECT TO MULTIPLE LOAD CASES USING BI-DIRECTIONAL EVOLUTIONARY STRUCTURAL OPTIMIZATION [Volume 10, Issue 30, 2012, Pages 77-86]
N
  • Nanofluid EVALUATION OF MIXED CONVECTION HEAT TRANSFER AND THERMAL CHARACTERISTIC AROUND TWO HEATED OBSTACLES IN INCLINED SQUARE CAVITY SUBJECTED TO A NANOFLUID [Volume 10, Issue 28, 2012, Pages 31-42]
  • Nash Game A COORDINATION MODEL FOR A COMPETITIVE SUPPLY CHAIN USING COOPERATIVE AND NON-COOPERATIVE GAME THEORY [Volume 10, Issue 29, 2012, Pages 19-31]
  • Nonlinear Dynamic Procedure Analysis INVESTIGATION OF DETERIORATION OF HYSTERETIC LOOPS IN NONLINEAR STATIC ANALYSIS (PUSHOVER) FOR SPECIAL MOMENT RESISTING FRAME WITH SHEAR WALLS [Volume 10, Issue 30, 2012, Pages 33-41]
  • Nonlinear Incremental Dynamic Analysis BEHAVIOR FACTOR OF STEEL DUAL FRAMES WITH LARGE- SCALED CONCENTRICALLY BRACING SYSTEMS [Volume 10, Issue 31, 2012, Pages 1-13]
  • Nonlinear Static Procedure Analysis INVESTIGATION OF DETERIORATION OF HYSTERETIC LOOPS IN NONLINEAR STATIC ANALYSIS (PUSHOVER) FOR SPECIAL MOMENT RESISTING FRAME WITH SHEAR WALLS [Volume 10, Issue 30, 2012, Pages 33-41]
  • Number of Bends NUMERICAL STUDY OF THE EFFECTIVE PARAMETERS ON THE PERFORMANCE OF EDDY INTERACTION MODEL FOR A WAVE-PLATE MIST ELIMINATOR [Volume 10, Issue 31, 2012, Pages 69-84]
  • Numerical analysis NUMERICAL ANALYSIS EFFECT OF AIRCRAFT MAIN GEARS ON THE CRITICAL ZONES OF RUNWAY RIGID PAVEMENT [Volume 10, Issue 29, 2012, Pages 61-70]
  • Numerical simulation NUMERICAL STUDY OF THE EFFECTIVE PARAMETERS ON THE PERFORMANCE OF EDDY INTERACTION MODEL FOR A WAVE-PLATE MIST ELIMINATOR [Volume 10, Issue 31, 2012, Pages 69-84]
  • Numerical simulation of combustor NUMERICAL SIMULATION OF SGT-600 GAS TURBINE COMBUSTOR AND FLOW FIELD UNDER OPERATION CONDITION [Volume 10, Issue 31, 2012, Pages 25-35]
O
  • Optimization SHAPE OPTIMIZATION OF SUPERSONIC WIND TUNNEL DIFFUSER USING GENETIC ALGORITHM [Volume 10, Issue 28, 2012, Pages 19-29]
  • Optimization of Mechanical Components DEVELOPMENT OF A REVERSE ENGINEERING PROCEDURE FOR UPGRADING AND MANUFACTURING OF LEGACY MECHANICAL AND STRUCTURAL COMPONENTS [Volume 10, Issue 28, 2012, Pages 69-82]
  • Over-strength Factor BEHAVIOR FACTOR OF STEEL DUAL FRAMES WITH LARGE- SCALED CONCENTRICALLY BRACING SYSTEMS [Volume 10, Issue 31, 2012, Pages 1-13]
P
  • Particles Size STATISTICAL MODELING OF SYNTHESIZING OF ALUMINUM BASED NANOCOMPSOITE PARTICLES REINFORCED BY SiC VIA MECHANICAL ALLOYING PROCESS [Volume 10, Issue 29, 2012, Pages 43-60]
  • Plastic Hinge Length MODELING AND ESTIMATION OF PLASTIC HINGE LENGTH OF RC COLUMNS USING ARTIFICIAL NEURAL NETWORKS [Volume 10, Issue 29, 2012, Pages 1-17]
  • Probabilistic Modeling WIND FARM EFFECTS ON TOTAL TRANSFER CAPABILITY [Volume 10, Issue 30, 2012, Pages 61-75]
  • Push-over Analysis BEHAVIOR FACTOR OF STEEL DUAL FRAMES WITH LARGE- SCALED CONCENTRICALLY BRACING SYSTEMS [Volume 10, Issue 31, 2012, Pages 1-13]
R
  • RC Columns MODELING AND ESTIMATION OF PLASTIC HINGE LENGTH OF RC COLUMNS USING ARTIFICIAL NEURAL NETWORKS [Volume 10, Issue 29, 2012, Pages 1-17]
  • Re Engineering DEVELOPMENT OF A REVERSE ENGINEERING PROCEDURE FOR UPGRADING AND MANUFACTURING OF LEGACY MECHANICAL AND STRUCTURAL COMPONENTS [Volume 10, Issue 28, 2012, Pages 69-82]
  • Regenerators MODELING OF ROTARY REGENERATORS [Volume 10, Issue 28, 2012, Pages 9-18]
  • Regression Model STATISTICAL MODELING OF SYNTHESIZING OF ALUMINUM BASED NANOCOMPSOITE PARTICLES REINFORCED BY SiC VIA MECHANICAL ALLOYING PROCESS [Volume 10, Issue 29, 2012, Pages 43-60]
  • Reinforced Concrete Structures INVESTIGATION OF DETERIORATION OF HYSTERETIC LOOPS IN NONLINEAR STATIC ANALYSIS (PUSHOVER) FOR SPECIAL MOMENT RESISTING FRAME WITH SHEAR WALLS [Volume 10, Issue 30, 2012, Pages 33-41]
  • Removal Efficiency NUMERICAL STUDY OF THE EFFECTIVE PARAMETERS ON THE PERFORMANCE OF EDDY INTERACTION MODEL FOR A WAVE-PLATE MIST ELIMINATOR [Volume 10, Issue 31, 2012, Pages 69-84]
  • Residual Stress EFFECTS OF END FORM OF T-JOINT WELDS ON FORMATION OF RESIDUAL STRESSES [Volume 10, Issue 29, 2012, Pages 81-90]
  • Reverse Engineering DEVELOPMENT OF A REVERSE ENGINEERING PROCEDURE FOR UPGRADING AND MANUFACTURING OF LEGACY MECHANICAL AND STRUCTURAL COMPONENTS [Volume 10, Issue 28, 2012, Pages 69-82]
  • Rigid Pavement NUMERICAL ANALYSIS EFFECT OF AIRCRAFT MAIN GEARS ON THE CRITICAL ZONES OF RUNWAY RIGID PAVEMENT [Volume 10, Issue 29, 2012, Pages 61-70]
  • Ring Compression Test SIMULATION AND INVESTIGATION OF RING COMPRESSION TEST FOR FRICTION MEASURMENT IN HOT FORGING PROCESS [Volume 10, Issue 31, 2012, Pages 59-67]
  • Riser MODELLING OF FCC PROCESS BASED ON CLUSTER SIZE VARIATION ALONG THE RISER [Volume 10, Issue 30, 2012, Pages 87-97]
  • Rotated Characteristic Curve MODELING AND NUMERICAL ANALYSIS OF THYRISTOR BASED CONVERTERS BY MULTI-VARIABLE RUNGE-KUTTA ALGORITHM [Volume 10, Issue 29, 2012, Pages 33-42]
  • Runge-Kutta Algorithm MODELING AND NUMERICAL ANALYSIS OF THYRISTOR BASED CONVERTERS BY MULTI-VARIABLE RUNGE-KUTTA ALGORITHM [Volume 10, Issue 29, 2012, Pages 33-42]
S
  • Security Constraints SHORT-TERM HYDROTHERMAL COORDINATION CONSIDERING SECURITY CONSTRAINTS AND VOLTAGE STABILITY [Volume 10, Issue 28, 2012, Pages 53-67]
  • Sensitivity analysis CORRECTION OF MASS-LOADING EFFECTS OF ACCELEROMETERS ON THE MEASURED FRFs USING OPTIMIZED MASS CHANGE ALGORITHM [Volume 10, Issue 30, 2012, Pages 19-31]
  • SGT600 gas turbine NUMERICAL SIMULATION OF SGT-600 GAS TURBINE COMBUSTOR AND FLOW FIELD UNDER OPERATION CONDITION [Volume 10, Issue 31, 2012, Pages 25-35]
  • Shape Optimization SHAPE OPTIMIZATION OF CONTACT PROBLEMS SUBJECT TO MULTIPLE LOAD CASES USING BI-DIRECTIONAL EVOLUTIONARY STRUCTURAL OPTIMIZATION [Volume 10, Issue 30, 2012, Pages 77-86]
  • Shear walls INVESTIGATION OF DETERIORATION OF HYSTERETIC LOOPS IN NONLINEAR STATIC ANALYSIS (PUSHOVER) FOR SPECIAL MOMENT RESISTING FRAME WITH SHEAR WALLS [Volume 10, Issue 30, 2012, Pages 33-41]
  • Sheet hydrofoming ANALYSIS OF AXISYMMETRIC SHEET HYDROFORMING PROCESS [Volume 10, Issue 31, 2012, Pages 49-57]
  • Short-term Hydrothermal Coordination SHORT-TERM HYDROTHERMAL COORDINATION CONSIDERING SECURITY CONSTRAINTS AND VOLTAGE STABILITY [Volume 10, Issue 28, 2012, Pages 53-67]
  • Simulation SIMULATION AND INVESTIGATION OF RING COMPRESSION TEST FOR FRICTION MEASURMENT IN HOT FORGING PROCESS [Volume 10, Issue 31, 2012, Pages 59-67]
  • Slenderness ANALYTICAL STUDY OF CONCRETE-FILLED DOUBLE SKIN STEEL TUBULAR COLUMNS UNDER INTERACTION OF BENDING MOMENT AND AXIAL LOAD [Volume 10, Issue 31, 2012, Pages 15-23]
  • Solid volume fraction EVALUATION OF MIXED CONVECTION HEAT TRANSFER AND THERMAL CHARACTERISTIC AROUND TWO HEATED OBSTACLES IN INCLINED SQUARE CAVITY SUBJECTED TO A NANOFLUID [Volume 10, Issue 28, 2012, Pages 31-42]
  • Specific Fuel Consumption MODELING OF THRUST AND SPECIFIC FUEL CONSUMPTION FOR A TURBOFAN ENGINE VIA GMDH-TYPE NEURAL NETWORKS [Volume 10, Issue 28, 2012, Pages 1-7]
  • Strain hardening THE MATHEMATICAL FORM OF MATERIAL CONSTITUTIVE LAWS APPLICABLE FOR MODELING OF METAL PLASTIC BEHAVIOR IN SIMULATION OF MACHINING [Volume 10, Issue 31, 2012, Pages 37-48]
  • Strain-rate hardening THE MATHEMATICAL FORM OF MATERIAL CONSTITUTIVE LAWS APPLICABLE FOR MODELING OF METAL PLASTIC BEHAVIOR IN SIMULATION OF MACHINING [Volume 10, Issue 31, 2012, Pages 37-48]
  • Stress Criterion SHAPE OPTIMIZATION OF CONTACT PROBLEMS SUBJECT TO MULTIPLE LOAD CASES USING BI-DIRECTIONAL EVOLUTIONARY STRUCTURAL OPTIMIZATION [Volume 10, Issue 30, 2012, Pages 77-86]
  • Supersonic Diffuser SHAPE OPTIMIZATION OF SUPERSONIC WIND TUNNEL DIFFUSER USING GENETIC ALGORITHM [Volume 10, Issue 28, 2012, Pages 19-29]
T
  • Tension Leg Platform AERO-HYDRO-ELASTIC SIMULATION OF TENSION LEG PLATFORM WIND TURBINE [Volume 10, Issue 30, 2012, Pages 1-17]
  • Thermal softening THE MATHEMATICAL FORM OF MATERIAL CONSTITUTIVE LAWS APPLICABLE FOR MODELING OF METAL PLASTIC BEHAVIOR IN SIMULATION OF MACHINING [Volume 10, Issue 31, 2012, Pages 37-48]
  • The Ultimate Bearing Capacity ANALYTICAL STUDY OF CONCRETE-FILLED DOUBLE SKIN STEEL TUBULAR COLUMNS UNDER INTERACTION OF BENDING MOMENT AND AXIAL LOAD [Volume 10, Issue 31, 2012, Pages 15-23]
  • Thickness variation ANALYSIS OF AXISYMMETRIC SHEET HYDROFORMING PROCESS [Volume 10, Issue 31, 2012, Pages 49-57]
  • Thrust MODELING OF THRUST AND SPECIFIC FUEL CONSUMPTION FOR A TURBOFAN ENGINE VIA GMDH-TYPE NEURAL NETWORKS [Volume 10, Issue 28, 2012, Pages 1-7]
  • Thyristor Based Converters MODELING AND NUMERICAL ANALYSIS OF THYRISTOR BASED CONVERTERS BY MULTI-VARIABLE RUNGE-KUTTA ALGORITHM [Volume 10, Issue 29, 2012, Pages 33-42]
  • T-joint EFFECTS OF END FORM OF T-JOINT WELDS ON FORMATION OF RESIDUAL STRESSES [Volume 10, Issue 29, 2012, Pages 81-90]
  • Total Transfer Capability WIND FARM EFFECTS ON TOTAL TRANSFER CAPABILITY [Volume 10, Issue 30, 2012, Pages 61-75]
  • Transmission Networks WIND FARM EFFECTS ON TOTAL TRANSFER CAPABILITY [Volume 10, Issue 30, 2012, Pages 61-75]
  • Turbofan Engine MODELING OF THRUST AND SPECIFIC FUEL CONSUMPTION FOR A TURBOFAN ENGINE VIA GMDH-TYPE NEURAL NETWORKS [Volume 10, Issue 28, 2012, Pages 1-7]
U
  • Upper Bound Method UPPER BOUND ANALYSIS OF BIMETAL SHEET EXTRUSION PROCESS THROUGH TAPER DIES [Volume 10, Issue 28, 2012, Pages 43-51]
V
  • Variable properties EVALUATION OF MIXED CONVECTION HEAT TRANSFER AND THERMAL CHARACTERISTIC AROUND TWO HEATED OBSTACLES IN INCLINED SQUARE CAVITY SUBJECTED TO A NANOFLUID [Volume 10, Issue 28, 2012, Pages 31-42]
  • Variable properties FLOW BEHAVIOR AND THERMAL PERFORMANCE OF DOUBLE LID-DRIVEN CAVITY SUBJECTED TO NANOFLUID WITH VARIABLE PROPERTIES [Volume 10, Issue 30, 2012, Pages 43-60]
  • Velocity Ration FLOW BEHAVIOR AND THERMAL PERFORMANCE OF DOUBLE LID-DRIVEN CAVITY SUBJECTED TO NANOFLUID WITH VARIABLE PROPERTIES [Volume 10, Issue 30, 2012, Pages 43-60]
  • Voltage Stability SHORT-TERM HYDROTHERMAL COORDINATION CONSIDERING SECURITY CONSTRAINTS AND VOLTAGE STABILITY [Volume 10, Issue 28, 2012, Pages 53-67]
W
  • Wave-Plate Mist Eliminator NUMERICAL STUDY OF THE EFFECTIVE PARAMETERS ON THE PERFORMANCE OF EDDY INTERACTION MODEL FOR A WAVE-PLATE MIST ELIMINATOR [Volume 10, Issue 31, 2012, Pages 69-84]
  • Weighted Average Method SHAPE OPTIMIZATION OF CONTACT PROBLEMS SUBJECT TO MULTIPLE LOAD CASES USING BI-DIRECTIONAL EVOLUTIONARY STRUCTURAL OPTIMIZATION [Volume 10, Issue 30, 2012, Pages 77-86]
  • Wind Farm WIND FARM EFFECTS ON TOTAL TRANSFER CAPABILITY [Volume 10, Issue 30, 2012, Pages 61-75]
  • Wind Tunnel SHAPE OPTIMIZATION OF SUPERSONIC WIND TUNNEL DIFFUSER USING GENETIC ALGORITHM [Volume 10, Issue 28, 2012, Pages 19-29]