Journal of Modeling in Engineering

Journal of Modeling in Engineering

Keyword Index
A
  • AC-DC Power Converters An Integrated Interlinking Converter with DC link Voltage Balancing Capability for Bipolar Hybrid Microgrid [Volume 18, Issue 60, 2020, Pages 201-216]
  • Adaptation rule Design of an Estimator Based on Duality Principle for Unknown and Time-varying Delay Estimation in LTI Systems [Volume 18, Issue 60, 2020, Pages 143-156]
  • Adaptive Augmented observer Control of Sensorless PMSM using State Dependent Model Reference Adaptive System and Adaptive Augmented Observer [Volume 18, Issue 63, 2020, Pages 85-95]
  • Analytical method Estimation of flow temperature in horizontal pipe using analytical inverse heat transfer [Volume 18, Issue 61, 2020, Pages 1-12]
  • Analytical modeling An Analytical Model to Evaluate the Effects of Wind Turbine Parameters and the Probabilistic Characteristic of Wind Speed on the Average LMP of the Power Market [Volume 18, Issue 62, 2020, Pages 31-42]
  • Analytical Solution Modeling of nitrogen release in urea-modified lignin matrix [Volume 18, Issue 60, 2020, Pages 1-11]
  • Angle of Attack Experimental study on The Angle of attack effect on Hydraulic- Thermal performance of a cam-shaped tube with constant heat flux in cross flow [Volume 18, Issue 60, 2020, Pages 27-37]
  • Angular velocity Analysis Of Blood Flow In A Micro channel Under The Influence Of Rotation And EDL [Volume 18, Issue 61, 2020, Pages 111-120]
  • ANP Supplier selection using the hybrid fuzzy ANP-DEMATE-VIKOR approach [Volume 18, Issue 60, 2020, Pages 87-105]
  • Article 19 Techno-economic evaluation of using ice storage systems based on the new requirements of the draft of the fourth edition of the National Building Regulations, Article 19 [Volume 18, Issue 63, 2020, Pages 65-72]
  • Artificial Neural Network Evaluation of artificial neural network, neuro-fuzzy and multivariate regression modelling for prediction of concrete compressive strength via point load test [Volume 18, Issue 62, 2020, Pages 99-113]
  • ASPEN-HYSYS Software Simulation and Modification of The Process at The Gas Compression Station to Reduce Fuel Consumption and Environmental Pollution [Volume 18, Issue 62, 2020, Pages 83-97]
  • ASR A New and Efficient Feature Extraction Method for Robust Speech Recognition Based on Fractional Fourier Transform and Differential Evolution Optimizer [Volume 18, Issue 61, 2020, Pages 85-96]
B
  • Barreling Factor Evaluation of friction using cylinder compression test: two novel approaches based on the barreling deformation and forging force [Volume 18, Issue 61, 2020, Pages 97-109]
  • Bearing Evaluation of Effective Parameters on Bearing Strength of Bolted Joints with GLARE Construction through FEM [Volume 18, Issue 60, 2020, Pages 39-52]
  • Bidirectional structure A Novel Multilevel Inverter Topology Aiming Reduction the Switch Count and Converter Cost [Volume 18, Issue 60, 2020, Pages 71-85]
  • Bipolar Hybrid Microgrid An Integrated Interlinking Converter with DC link Voltage Balancing Capability for Bipolar Hybrid Microgrid [Volume 18, Issue 60, 2020, Pages 201-216]
  • Blood Analysis Of Blood Flow In A Micro channel Under The Influence Of Rotation And EDL [Volume 18, Issue 61, 2020, Pages 111-120]
  • Boiler Numerical study of the flow and heat transfer due to the changing of the burner angle in a П-type boiler [Volume 18, Issue 61, 2020, Pages 139-149]
  • Bolted Joints Evaluation of Effective Parameters on Bearing Strength of Bolted Joints with GLARE Construction through FEM [Volume 18, Issue 60, 2020, Pages 39-52]
  • Boundary Shear Stress Turbulence Intensity and Boundary Shear Stress in Meandering Compound Channel under the Influence of Sinusoidal Changes [Volume 18, Issue 60, 2020, Pages 53-69]
  • Breakwater Simulation study of a semi_circular Caisson Breakwater in a Non-uniform State in a Shallow Water Situation [Volume 18, Issue 60, 2020, Pages 183-199]
  • BSIM3 Model Comprehensive Modeling of the Depletion-mode MOS Capacitor for Circuit Simulation [Volume 18, Issue 62, 2020, Pages 43-56]
  • Building regulations Techno-economic evaluation of using ice storage systems based on the new requirements of the draft of the fourth edition of the National Building Regulations, Article 19 [Volume 18, Issue 63, 2020, Pages 65-72]
  • Bulk metal forming Evaluation of friction using cylinder compression test: two novel approaches based on the barreling deformation and forging force [Volume 18, Issue 61, 2020, Pages 97-109]
  • Burner Numerical study of the flow and heat transfer due to the changing of the burner angle in a П-type boiler [Volume 18, Issue 61, 2020, Pages 139-149]
C
  • Cam-Shaped Tube Experimental study on The Angle of attack effect on Hydraulic- Thermal performance of a cam-shaped tube with constant heat flux in cross flow [Volume 18, Issue 60, 2020, Pages 27-37]
  • Carrier HAP Techno-economic evaluation of using ice storage systems based on the new requirements of the draft of the fourth edition of the National Building Regulations, Article 19 [Volume 18, Issue 63, 2020, Pages 65-72]
  • Cascading Failure Analysis Real time Vulnerability Assessment in Cascading Failure Analysis Using an Intelligence Monitoring Model [Volume 18, Issue 63, 2020, Pages 97-111]
  • Chaos Localization in IoT by using Fractional Order Chaotic Particle Swarm Algorithm Optimization [Volume 18, Issue 60, 2020, Pages 157-168]
  • Charge thickness model Comprehensive Modeling of the Depletion-mode MOS Capacitor for Circuit Simulation [Volume 18, Issue 62, 2020, Pages 43-56]
  • Classifier A New and Efficient Feature Extraction Method for Robust Speech Recognition Based on Fractional Fourier Transform and Differential Evolution Optimizer [Volume 18, Issue 61, 2020, Pages 85-96]
  • Coefficients of cutting and cutting edge Mechanistic modeling of cutting forces in end milling with the direct cutting edge [Volume 18, Issue 61, 2020, Pages 151-166]
  • Cohesive element The effect of fiber-matrix interface properties on damage behavior of composite materials [Volume 18, Issue 63, 2020, Pages 113-129]
  • Cold energy storage Techno-economic evaluation of using ice storage systems based on the new requirements of the draft of the fourth edition of the National Building Regulations, Article 19 [Volume 18, Issue 63, 2020, Pages 65-72]
  • Combustion Numerical study of the flow and heat transfer due to the changing of the burner angle in a П-type boiler [Volume 18, Issue 61, 2020, Pages 139-149]
  • Composite Material The effect of fiber-matrix interface properties on damage behavior of composite materials [Volume 18, Issue 63, 2020, Pages 113-129]
  • Compound Channel Turbulence Intensity and Boundary Shear Stress in Meandering Compound Channel under the Influence of Sinusoidal Changes [Volume 18, Issue 60, 2020, Pages 53-69]
  • Concrete compressive strength Evaluation of artificial neural network, neuro-fuzzy and multivariate regression modelling for prediction of concrete compressive strength via point load test [Volume 18, Issue 62, 2020, Pages 99-113]
  • Condenser Numerical Solution of the Effect of Increasing the Wall Temperature on Flow and Heat Transfer in Pulsating Heat Pipe [Volume 18, Issue 60, 2020, Pages 13-25]
  • Condition-based maintenance A demand-based simultaneous inspection and preventive maintenance planning with Markovian deteriorating machine conditions: An application in Wind Turbine [Volume 18, Issue 61, 2020, Pages 63-84]
  • Constant Heat Flux Experimental study on The Angle of attack effect on Hydraulic- Thermal performance of a cam-shaped tube with constant heat flux in cross flow [Volume 18, Issue 60, 2020, Pages 27-37]
  • Continuous disk laser welding Prediction of residual stress and elasto-plastic strains distribution in disk keyhole laser welding of dissimilar joining between copper & 304 stainless steel [Volume 18, Issue 63, 2020, Pages 151-166]
  • Cooling loads Techno-economic evaluation of using ice storage systems based on the new requirements of the draft of the fourth edition of the National Building Regulations, Article 19 [Volume 18, Issue 63, 2020, Pages 65-72]
  • Cost reduction A Novel Multilevel Inverter Topology Aiming Reduction the Switch Count and Converter Cost [Volume 18, Issue 60, 2020, Pages 71-85]
  • Creating textures Script independent offline writer identification from handwriting samples based on texture using wavelet transform in Persian-English languages [Volume 18, Issue 63, 2020, Pages 1-13]
  • Cross flow Experimental study on The Angle of attack effect on Hydraulic- Thermal performance of a cam-shaped tube with constant heat flux in cross flow [Volume 18, Issue 60, 2020, Pages 27-37]
  • Cutting forces Mechanistic modeling of cutting forces in end milling with the direct cutting edge [Volume 18, Issue 61, 2020, Pages 151-166]
  • Cutting straight edge Mechanistic modeling of cutting forces in end milling with the direct cutting edge [Volume 18, Issue 61, 2020, Pages 151-166]
  • Cyclohexane Theoretical analysis based on CFD method for evaluation of Pd-Ag Membrane reactor performance in comparison with conventional reactor during dehydrogenation of cyclohexane [Volume 18, Issue 60, 2020, Pages 217-226]
D
  • DC-link Voltage Control An Integrated Interlinking Converter with DC link Voltage Balancing Capability for Bipolar Hybrid Microgrid [Volume 18, Issue 60, 2020, Pages 201-216]
  • Decission tree An Intelligent Model Based on Phase Space Analysis for Fault Classification in Single Circuit Transmission Lines [Volume 18, Issue 60, 2020, Pages 227-243]
  • Deformation Experimental Studies on Energy Absorption of Curved Steel Sheets under Impact Loading and the Effect of Pendentive on the Deformation of Samples [Volume 18, Issue 63, 2020, Pages 27-40]
  • Dehydrogenation Theoretical analysis based on CFD method for evaluation of Pd-Ag Membrane reactor performance in comparison with conventional reactor during dehydrogenation of cyclohexane [Volume 18, Issue 60, 2020, Pages 217-226]
  • Delay estimator Design of an Estimator Based on Duality Principle for Unknown and Time-varying Delay Estimation in LTI Systems [Volume 18, Issue 60, 2020, Pages 143-156]
  • DEMATEL Supplier selection using the hybrid fuzzy ANP-DEMATE-VIKOR approach [Volume 18, Issue 60, 2020, Pages 87-105]
  • Depletion-mode MOSFET Comprehensive Modeling of the Depletion-mode MOS Capacitor for Circuit Simulation [Volume 18, Issue 62, 2020, Pages 43-56]
  • Differential evolution algorithm A New and Efficient Feature Extraction Method for Robust Speech Recognition Based on Fractional Fourier Transform and Differential Evolution Optimizer [Volume 18, Issue 61, 2020, Pages 85-96]
  • Diffraction Method The performance investigation of discontinuity definition techniques on numerical solution of crack problems by meshless method [Volume 18, Issue 62, 2020, Pages 115-128]
  • Discontinuities Definition Techniques The performance investigation of discontinuity definition techniques on numerical solution of crack problems by meshless method [Volume 18, Issue 62, 2020, Pages 115-128]
  • Discrete Least Squares The performance investigation of discontinuity definition techniques on numerical solution of crack problems by meshless method [Volume 18, Issue 62, 2020, Pages 115-128]
  • Discrete Wavelet Transformation An Intelligent Hybrid Segmentation Model Based on Fuzzy Logic, Discrete Wavelet Transform In Digital Imaging for Detection of Gastric Cancer [Volume 18, Issue 63, 2020, Pages 131-150]
  • Distance Relay An Intelligent and Time Adaptive Model for Symmetrical and Asymmetrical Faults during Power Swing [Volume 18, Issue 61, 2020, Pages 35-47]
  • Disturbance Providing a mathematical optimization model for the multi-product supply chain despite the possibility of supplier disruption under sanctions (Case Study of Refinery Repair Industries) [Volume 18, Issue 60, 2020, Pages 107-125]
  • Doubly Fed Induction Generator (DFIG) Modeling Doubly Fed Induction Generator Based Wind Farms by Aggregating the Mechanical Parts Using Clustering by Power Coefficient [Volume 18, Issue 60, 2020, Pages 169-182]
  • Duality principle Design of an Estimator Based on Duality Principle for Unknown and Time-varying Delay Estimation in LTI Systems [Volume 18, Issue 60, 2020, Pages 143-156]
  • Dynamic Islanding proposing a linear two-step model for evaluating the impact of electric vehicles charging demand on fast charging stations on resiliency of active distribution network [Volume 18, Issue 62, 2020, Pages 57-69]
E
  • Eccentric pin Development and modification of the thermal model of the friction stir welding process with an eccentric pin [Volume 18, Issue 62, 2020, Pages 1-12]
  • EDCA A new dynamic EDCA mechanism to improve VoIP services in 802.11ac networks [Volume 18, Issue 61, 2020, Pages 21-34]
  • Electrical double layer Analysis Of Blood Flow In A Micro channel Under The Influence Of Rotation And EDL [Volume 18, Issue 61, 2020, Pages 111-120]
  • Electricity market An Analytical Model to Evaluate the Effects of Wind Turbine Parameters and the Probabilistic Characteristic of Wind Speed on the Average LMP of the Power Market [Volume 18, Issue 62, 2020, Pages 31-42]
  • Electric vehicles proposing a linear two-step model for evaluating the impact of electric vehicles charging demand on fast charging stations on resiliency of active distribution network [Volume 18, Issue 62, 2020, Pages 57-69]
  • Electro-rheological Robust Control of Electro Rheological Suspension System Based on LMI Approach [Volume 18, Issue 62, 2020, Pages 153-163]
  • End mill tool Mechanistic modeling of cutting forces in end milling with the direct cutting edge [Volume 18, Issue 61, 2020, Pages 151-166]
  • Epsilon-constraint Method Development of a multi-objective mathematical model for sustainable diet planning of athletes [Volume 18, Issue 63, 2020, Pages 73-84]
  • Equivalent Model Modeling Doubly Fed Induction Generator Based Wind Farms by Aggregating the Mechanical Parts Using Clustering by Power Coefficient [Volume 18, Issue 60, 2020, Pages 169-182]
  • Evaporator Numerical Solution of the Effect of Increasing the Wall Temperature on Flow and Heat Transfer in Pulsating Heat Pipe [Volume 18, Issue 60, 2020, Pages 13-25]
F
  • Failure Criteria Evaluation of Effective Parameters on Bearing Strength of Bolted Joints with GLARE Construction through FEM [Volume 18, Issue 60, 2020, Pages 39-52]
  • Fast charging stations proposing a linear two-step model for evaluating the impact of electric vehicles charging demand on fast charging stations on resiliency of active distribution network [Volume 18, Issue 62, 2020, Pages 57-69]
  • Fault classification An Intelligent Model Based on Phase Space Analysis for Fault Classification in Single Circuit Transmission Lines [Volume 18, Issue 60, 2020, Pages 227-243]
  • Fault Identification An Intelligent and Time Adaptive Model for Symmetrical and Asymmetrical Faults during Power Swing [Volume 18, Issue 61, 2020, Pages 35-47]
  • FEM Evaluation of Effective Parameters on Bearing Strength of Bolted Joints with GLARE Construction through FEM [Volume 18, Issue 60, 2020, Pages 39-52]
  • Fiber-matrix debonding The effect of fiber-matrix interface properties on damage behavior of composite materials [Volume 18, Issue 63, 2020, Pages 113-129]
  • Finite and Infinite volume Modeling of nitrogen release in urea-modified lignin matrix [Volume 18, Issue 60, 2020, Pages 1-11]
  • Flow3D Turbulence Intensity and Boundary Shear Stress in Meandering Compound Channel under the Influence of Sinusoidal Changes [Volume 18, Issue 60, 2020, Pages 53-69]
  • Fog-Cloud platform A New Meta-Heuristic Algorithm Based on Tabu Search for the Job Scheduling Problem in a Fog-Cloud system [Volume 18, Issue 62, 2020, Pages 13-29]
  • Fog computing A New Meta-Heuristic Algorithm Based on Tabu Search for the Job Scheduling Problem in a Fog-Cloud system [Volume 18, Issue 62, 2020, Pages 13-29]
  • Fractal dimension Script independent offline writer identification from handwriting samples based on texture using wavelet transform in Persian-English languages [Volume 18, Issue 63, 2020, Pages 1-13]
  • Fractional derivatives Localization in IoT by using Fractional Order Chaotic Particle Swarm Algorithm Optimization [Volume 18, Issue 60, 2020, Pages 157-168]
  • Fractional Fourier Transform A New and Efficient Feature Extraction Method for Robust Speech Recognition Based on Fractional Fourier Transform and Differential Evolution Optimizer [Volume 18, Issue 61, 2020, Pages 85-96]
  • Frailty model The Application of Frailty Model in Remaining Useful Life Estimation (Case Study: Sungun Copper Mine's Loading System) [Volume 18, Issue 62, 2020, Pages 129-142]
  • Freed Forward Multi-layer Artificial Neural Network Real time Vulnerability Assessment in Cascading Failure Analysis Using an Intelligence Monitoring Model [Volume 18, Issue 63, 2020, Pages 97-111]
  • Friction Evaluation of friction using cylinder compression test: two novel approaches based on the barreling deformation and forging force [Volume 18, Issue 61, 2020, Pages 97-109]
  • Friction stir welding Development and modification of the thermal model of the friction stir welding process with an eccentric pin [Volume 18, Issue 62, 2020, Pages 1-12]
  • Fuzzy logic An Intelligent Hybrid Segmentation Model Based on Fuzzy Logic, Discrete Wavelet Transform In Digital Imaging for Detection of Gastric Cancer [Volume 18, Issue 63, 2020, Pages 131-150]
  • Fuzzy theory Supplier selection using the hybrid fuzzy ANP-DEMATE-VIKOR approach [Volume 18, Issue 60, 2020, Pages 87-105]
G
  • Galois Design and simulation of Penternary adder based on GNRFET [Volume 18, Issue 63, 2020, Pages 41-50]
  • Genetic programming Developing a model for predicting the number of freight accidents involving death and injury Using Genetic Planning [Volume 18, Issue 61, 2020, Pages 49-62]
  • GLARE Evaluation of Effective Parameters on Bearing Strength of Bolted Joints with GLARE Construction through FEM [Volume 18, Issue 60, 2020, Pages 39-52]
  • Glycol dehydration Simulation and Modification of The Process at The Gas Compression Station to Reduce Fuel Consumption and Environmental Pollution [Volume 18, Issue 62, 2020, Pages 83-97]
  • Graphene Design of seamless graphene inverter together with its transfer matrix modeling [Volume 18, Issue 61, 2020, Pages 121-137]
  • Graphene nanoribbon Design and simulation of Penternary adder based on GNRFET [Volume 18, Issue 63, 2020, Pages 41-50]
H
  • Heat Recovery Simulation and Modification of The Process at The Gas Compression Station to Reduce Fuel Consumption and Environmental Pollution [Volume 18, Issue 62, 2020, Pages 83-97]
  • Heat transfer Numerical Solution of the Effect of Increasing the Wall Temperature on Flow and Heat Transfer in Pulsating Heat Pipe [Volume 18, Issue 60, 2020, Pages 13-25]
  • Heat transfer Numerical study of the flow and heat transfer due to the changing of the burner angle in a П-type boiler [Volume 18, Issue 61, 2020, Pages 139-149]
  • Heavy Equipment The Application of Frailty Model in Remaining Useful Life Estimation (Case Study: Sungun Copper Mine's Loading System) [Volume 18, Issue 62, 2020, Pages 129-142]
  • Hybrid Inverter Indirect vector control of three phase induction motor based on a 2/3 level inverter [Volume 18, Issue 60, 2020, Pages 127-141]
  • Hybrid Laminate Evaluation of Effective Parameters on Bearing Strength of Bolted Joints with GLARE Construction through FEM [Volume 18, Issue 60, 2020, Pages 39-52]
  • Hydraulic- Thermal Experimental study on The Angle of attack effect on Hydraulic- Thermal performance of a cam-shaped tube with constant heat flux in cross flow [Volume 18, Issue 60, 2020, Pages 27-37]
  • Hydrogen production Theoretical analysis based on CFD method for evaluation of Pd-Ag Membrane reactor performance in comparison with conventional reactor during dehydrogenation of cyclohexane [Volume 18, Issue 60, 2020, Pages 217-226]
I
  • Ice energy storage Techno-economic evaluation of using ice storage systems based on the new requirements of the draft of the fourth edition of the National Building Regulations, Article 19 [Volume 18, Issue 63, 2020, Pages 65-72]
  • Identify the location of the pollutant sources Simultaneous identification of location and intensity of several active pollutant sources in river using mathematical modeling [Volume 18, Issue 60, 2020, Pages 257-272]
  • Impact acceleration Experimental Studies on Energy Absorption of Curved Steel Sheets under Impact Loading and the Effect of Pendentive on the Deformation of Samples [Volume 18, Issue 63, 2020, Pages 27-40]
  • Indirect Vector Control Indirect vector control of three phase induction motor based on a 2/3 level inverter [Volume 18, Issue 60, 2020, Pages 127-141]
  • Input time varying delay Design of an Estimator Based on Duality Principle for Unknown and Time-varying Delay Estimation in LTI Systems [Volume 18, Issue 60, 2020, Pages 143-156]
  • Inspection planning A demand-based simultaneous inspection and preventive maintenance planning with Markovian deteriorating machine conditions: An application in Wind Turbine [Volume 18, Issue 61, 2020, Pages 63-84]
  • Intelligent model An Intelligent Model Based on Phase Space Analysis for Fault Classification in Single Circuit Transmission Lines [Volume 18, Issue 60, 2020, Pages 227-243]
  • Internet of Things Localization in IoT by using Fractional Order Chaotic Particle Swarm Algorithm Optimization [Volume 18, Issue 60, 2020, Pages 157-168]
  • Inverse heat transfer Estimation of flow temperature in horizontal pipe using analytical inverse heat transfer [Volume 18, Issue 61, 2020, Pages 1-12]
J
  • Job scheduling A New Meta-Heuristic Algorithm Based on Tabu Search for the Job Scheduling Problem in a Fog-Cloud system [Volume 18, Issue 62, 2020, Pages 13-29]
K
  • K-Means Algorithm Modeling Doubly Fed Induction Generator Based Wind Farms by Aggregating the Mechanical Parts Using Clustering by Power Coefficient [Volume 18, Issue 60, 2020, Pages 169-182]
L
  • Language-independent handwriting recognition Script independent offline writer identification from handwriting samples based on texture using wavelet transform in Persian-English languages [Volume 18, Issue 63, 2020, Pages 1-13]
  • Linear Matrix Inequality Robust Control of Electro Rheological Suspension System Based on LMI Approach [Volume 18, Issue 62, 2020, Pages 153-163]
  • Locational Marginal Price An Analytical Model to Evaluate the Effects of Wind Turbine Parameters and the Probabilistic Characteristic of Wind Speed on the Average LMP of the Power Market [Volume 18, Issue 62, 2020, Pages 31-42]
  • Long Short Term Memory An Intelligent and Time Adaptive Model for Symmetrical and Asymmetrical Faults during Power Swing [Volume 18, Issue 61, 2020, Pages 35-47]
  • LTI systems Design of an Estimator Based on Duality Principle for Unknown and Time-varying Delay Estimation in LTI Systems [Volume 18, Issue 60, 2020, Pages 143-156]
  • Lyapunov stability Control of Sensorless PMSM using State Dependent Model Reference Adaptive System and Adaptive Augmented Observer [Volume 18, Issue 63, 2020, Pages 85-95]
M
  • MADM Supplier selection using the hybrid fuzzy ANP-DEMATE-VIKOR approach [Volume 18, Issue 60, 2020, Pages 87-105]
  • Mathematical Optimization Providing a mathematical optimization model for the multi-product supply chain despite the possibility of supplier disruption under sanctions (Case Study of Refinery Repair Industries) [Volume 18, Issue 60, 2020, Pages 107-125]
  • Matrix crack The effect of fiber-matrix interface properties on damage behavior of composite materials [Volume 18, Issue 63, 2020, Pages 113-129]
  • Matrix system Modeling of nitrogen release in urea-modified lignin matrix [Volume 18, Issue 60, 2020, Pages 1-11]
  • Meandering Turbulence Intensity and Boundary Shear Stress in Meandering Compound Channel under the Influence of Sinusoidal Changes [Volume 18, Issue 60, 2020, Pages 53-69]
  • Mean Sampling Approx Providing a mathematical optimization model for the multi-product supply chain despite the possibility of supplier disruption under sanctions (Case Study of Refinery Repair Industries) [Volume 18, Issue 60, 2020, Pages 107-125]
  • Mechanistic modeling Mechanistic modeling of cutting forces in end milling with the direct cutting edge [Volume 18, Issue 61, 2020, Pages 151-166]
  • Meshless Method The performance investigation of discontinuity definition techniques on numerical solution of crack problems by meshless method [Volume 18, Issue 62, 2020, Pages 115-128]
  • Micro channel Analysis Of Blood Flow In A Micro channel Under The Influence Of Rotation And EDL [Volume 18, Issue 61, 2020, Pages 111-120]
  • MIMO A new dynamic EDCA mechanism to improve VoIP services in 802.11ac networks [Volume 18, Issue 61, 2020, Pages 21-34]
  • Modeling and Simulation Theoretical analysis based on CFD method for evaluation of Pd-Ag Membrane reactor performance in comparison with conventional reactor during dehydrogenation of cyclohexane [Volume 18, Issue 60, 2020, Pages 217-226]
  • Modeling of Controlled-release Modeling of nitrogen release in urea-modified lignin matrix [Volume 18, Issue 60, 2020, Pages 1-11]
  • Modified hyperbolic model Modeling of nitrogen release in urea-modified lignin matrix [Volume 18, Issue 60, 2020, Pages 1-11]
  • MOS capacitor Comprehensive Modeling of the Depletion-mode MOS Capacitor for Circuit Simulation [Volume 18, Issue 62, 2020, Pages 43-56]
  • Multi-criteria Vulnerability Index Real time Vulnerability Assessment in Cascading Failure Analysis Using an Intelligence Monitoring Model [Volume 18, Issue 63, 2020, Pages 97-111]
  • Multilevel Inverter A Novel Multilevel Inverter Topology Aiming Reduction the Switch Count and Converter Cost [Volume 18, Issue 60, 2020, Pages 71-85]
  • Multi-objective Mathematical Model Development of a multi-objective mathematical model for sustainable diet planning of athletes [Volume 18, Issue 63, 2020, Pages 73-84]
  • Multiple Vertical Columns (fiber) method Modeling inelastic behavior of RC adhered shear wall‏s in opensees [Volume 18, Issue 63, 2020, Pages 15-25]
  • Multivariate regression Evaluation of artificial neural network, neuro-fuzzy and multivariate regression modelling for prediction of concrete compressive strength via point load test [Volume 18, Issue 62, 2020, Pages 99-113]
N
  • Nano Particle Analysis Of Blood Flow In A Micro channel Under The Influence Of Rotation And EDL [Volume 18, Issue 61, 2020, Pages 111-120]
  • Numerical simulation Development and modification of the thermal model of the friction stir welding process with an eccentric pin [Volume 18, Issue 62, 2020, Pages 1-12]
  • Numerical Solution Numerical Solution of the Effect of Increasing the Wall Temperature on Flow and Heat Transfer in Pulsating Heat Pipe [Volume 18, Issue 60, 2020, Pages 13-25]
O
  • Online parameter identification Control of Sensorless PMSM using State Dependent Model Reference Adaptive System and Adaptive Augmented Observer [Volume 18, Issue 63, 2020, Pages 85-95]
  • Online Vulnerability Assessment Real time Vulnerability Assessment in Cascading Failure Analysis Using an Intelligence Monitoring Model [Volume 18, Issue 63, 2020, Pages 97-111]
  • Open Sees Modeling inelastic behavior of RC adhered shear wall‏s in opensees [Volume 18, Issue 63, 2020, Pages 15-25]
  • Optimization Development of a multi-objective mathematical model for sustainable diet planning of athletes [Volume 18, Issue 63, 2020, Pages 73-84]
P
  • Palladium Membrane Reactor Theoretical analysis based on CFD method for evaluation of Pd-Ag Membrane reactor performance in comparison with conventional reactor during dehydrogenation of cyclohexane [Volume 18, Issue 60, 2020, Pages 217-226]
  • Particle swarm optimization Localization in IoT by using Fractional Order Chaotic Particle Swarm Algorithm Optimization [Volume 18, Issue 60, 2020, Pages 157-168]
  • Pendentive Experimental Studies on Energy Absorption of Curved Steel Sheets under Impact Loading and the Effect of Pendentive on the Deformation of Samples [Volume 18, Issue 63, 2020, Pages 27-40]
  • Penternary logic Design and simulation of Penternary adder based on GNRFET [Volume 18, Issue 63, 2020, Pages 41-50]
  • Permanent magnet synchronous motor Control of Sensorless PMSM using State Dependent Model Reference Adaptive System and Adaptive Augmented Observer [Volume 18, Issue 63, 2020, Pages 85-95]
  • Phase space analysis An Intelligent Model Based on Phase Space Analysis for Fault Classification in Single Circuit Transmission Lines [Volume 18, Issue 60, 2020, Pages 227-243]
  • Point load method Evaluation of artificial neural network, neuro-fuzzy and multivariate regression modelling for prediction of concrete compressive strength via point load test [Volume 18, Issue 62, 2020, Pages 99-113]
  • Power Distribution An Integrated Interlinking Converter with DC link Voltage Balancing Capability for Bipolar Hybrid Microgrid [Volume 18, Issue 60, 2020, Pages 201-216]
  • Power Swing An Intelligent and Time Adaptive Model for Symmetrical and Asymmetrical Faults during Power Swing [Volume 18, Issue 61, 2020, Pages 35-47]
  • Process Simulation Simulation and Modification of The Process at The Gas Compression Station to Reduce Fuel Consumption and Environmental Pollution [Volume 18, Issue 62, 2020, Pages 83-97]
  • Pulsating Heat Pipe Numerical Solution of the Effect of Increasing the Wall Temperature on Flow and Heat Transfer in Pulsating Heat Pipe [Volume 18, Issue 60, 2020, Pages 13-25]
R
  • Recurrent Neural Network An Intelligent and Time Adaptive Model for Symmetrical and Asymmetrical Faults during Power Swing [Volume 18, Issue 61, 2020, Pages 35-47]
  • Reducing fuel consumption Simulation and Modification of The Process at The Gas Compression Station to Reduce Fuel Consumption and Environmental Pollution [Volume 18, Issue 62, 2020, Pages 83-97]
  • Release pattern Modeling of nitrogen release in urea-modified lignin matrix [Volume 18, Issue 60, 2020, Pages 1-11]
  • Reliability The Application of Frailty Model in Remaining Useful Life Estimation (Case Study: Sungun Copper Mine's Loading System) [Volume 18, Issue 62, 2020, Pages 129-142]
  • Remaining Useful Life (RUL) The Application of Frailty Model in Remaining Useful Life Estimation (Case Study: Sungun Copper Mine's Loading System) [Volume 18, Issue 62, 2020, Pages 129-142]
  • Residual Stress Prediction of residual stress and elasto-plastic strains distribution in disk keyhole laser welding of dissimilar joining between copper & 304 stainless steel [Volume 18, Issue 63, 2020, Pages 151-166]
  • Resiliency proposing a linear two-step model for evaluating the impact of electric vehicles charging demand on fast charging stations on resiliency of active distribution network [Volume 18, Issue 62, 2020, Pages 57-69]
  • Restoration of the intensity of pollutant sources Simultaneous identification of location and intensity of several active pollutant sources in river using mathematical modeling [Volume 18, Issue 60, 2020, Pages 257-272]
  • Robust control Robust Control of Electro Rheological Suspension System Based on LMI Approach [Volume 18, Issue 62, 2020, Pages 153-163]
  • Robust Feature Extraction A New and Efficient Feature Extraction Method for Robust Speech Recognition Based on Fractional Fourier Transform and Differential Evolution Optimizer [Volume 18, Issue 61, 2020, Pages 85-96]
  • Robust Speech Recognition A New and Efficient Feature Extraction Method for Robust Speech Recognition Based on Fractional Fourier Transform and Differential Evolution Optimizer [Volume 18, Issue 61, 2020, Pages 85-96]
  • Round insert tip Mechanistic modeling of cutting forces in end milling with the direct cutting edge [Volume 18, Issue 61, 2020, Pages 151-166]
  • RVE The effect of fiber-matrix interface properties on damage behavior of composite materials [Volume 18, Issue 63, 2020, Pages 113-129]
S
  • Safety Developing a model for predicting the number of freight accidents involving death and injury Using Genetic Planning [Volume 18, Issue 61, 2020, Pages 49-62]
  • Semi-Active Robust Control of Electro Rheological Suspension System Based on LMI Approach [Volume 18, Issue 62, 2020, Pages 153-163]
  • Sensor node localization Localization in IoT by using Fractional Order Chaotic Particle Swarm Algorithm Optimization [Volume 18, Issue 60, 2020, Pages 157-168]
  • Simulation Simulation study of a semi_circular Caisson Breakwater in a Non-uniform State in a Shallow Water Situation [Volume 18, Issue 60, 2020, Pages 183-199]
  • Single circuit transmission lines An Intelligent Model Based on Phase Space Analysis for Fault Classification in Single Circuit Transmission Lines [Volume 18, Issue 60, 2020, Pages 227-243]
  • Sinusoidal No Turbulence Intensity and Boundary Shear Stress in Meandering Compound Channel under the Influence of Sinusoidal Changes [Volume 18, Issue 60, 2020, Pages 53-69]
  • Smart home A New Meta-Heuristic Algorithm Based on Tabu Search for the Job Scheduling Problem in a Fog-Cloud system [Volume 18, Issue 62, 2020, Pages 13-29]
  • Soft computing Evaluation of artificial neural network, neuro-fuzzy and multivariate regression modelling for prediction of concrete compressive strength via point load test [Volume 18, Issue 62, 2020, Pages 99-113]
  • Speed Control of Induction Motor Indirect vector control of three phase induction motor based on a 2/3 level inverter [Volume 18, Issue 60, 2020, Pages 127-141]
  • Star CCM+ Simulation study of a semi_circular Caisson Breakwater in a Non-uniform State in a Shallow Water Situation [Volume 18, Issue 60, 2020, Pages 183-199]
  • State dependent model reference adaptive controller Control of Sensorless PMSM using State Dependent Model Reference Adaptive System and Adaptive Augmented Observer [Volume 18, Issue 63, 2020, Pages 85-95]
  • State Feedback Robust Control of Electro Rheological Suspension System Based on LMI Approach [Volume 18, Issue 62, 2020, Pages 153-163]
  • Stochastic dynamic programming A demand-based simultaneous inspection and preventive maintenance planning with Markovian deteriorating machine conditions: An application in Wind Turbine [Volume 18, Issue 61, 2020, Pages 63-84]
  • Stomach Cancer An Intelligent Hybrid Segmentation Model Based on Fuzzy Logic, Discrete Wavelet Transform In Digital Imaging for Detection of Gastric Cancer [Volume 18, Issue 63, 2020, Pages 131-150]
  • Supplier selection Supplier selection using the hybrid fuzzy ANP-DEMATE-VIKOR approach [Volume 18, Issue 60, 2020, Pages 87-105]
  • Sustainability Development of a multi-objective mathematical model for sustainable diet planning of athletes [Volume 18, Issue 63, 2020, Pages 73-84]
  • Sustainable Diet Planning Development of a multi-objective mathematical model for sustainable diet planning of athletes [Volume 18, Issue 63, 2020, Pages 73-84]
  • SVM Algorithm An Intelligent Hybrid Segmentation Model Based on Fuzzy Logic, Discrete Wavelet Transform In Digital Imaging for Detection of Gastric Cancer [Volume 18, Issue 63, 2020, Pages 131-150]
  • Switch count reduction A Novel Multilevel Inverter Topology Aiming Reduction the Switch Count and Converter Cost [Volume 18, Issue 60, 2020, Pages 71-85]
T
  • Tabu Search A New Meta-Heuristic Algorithm Based on Tabu Search for the Job Scheduling Problem in a Fog-Cloud system [Volume 18, Issue 62, 2020, Pages 13-29]
  • The advection-dispersion equation Simultaneous identification of location and intensity of several active pollutant sources in river using mathematical modeling [Volume 18, Issue 60, 2020, Pages 257-272]
  • Thermal model Development and modification of the thermal model of the friction stir welding process with an eccentric pin [Volume 18, Issue 62, 2020, Pages 1-12]
  • The surface temperature of tube Estimation of flow temperature in horizontal pipe using analytical inverse heat transfer [Volume 18, Issue 61, 2020, Pages 1-12]
  • Tool shape Development and modification of the thermal model of the friction stir welding process with an eccentric pin [Volume 18, Issue 62, 2020, Pages 1-12]
  • Transmission line protection An Intelligent Model Based on Phase Space Analysis for Fault Classification in Single Circuit Transmission Lines [Volume 18, Issue 60, 2020, Pages 227-243]
  • Transparency Method The performance investigation of discontinuity definition techniques on numerical solution of crack problems by meshless method [Volume 18, Issue 62, 2020, Pages 115-128]
  • Turbine stack Simulation and Modification of The Process at The Gas Compression Station to Reduce Fuel Consumption and Environmental Pollution [Volume 18, Issue 62, 2020, Pages 83-97]
  • Turbulence intensity Turbulence Intensity and Boundary Shear Stress in Meandering Compound Channel under the Influence of Sinusoidal Changes [Volume 18, Issue 60, 2020, Pages 53-69]
  • Two-Stage Stochastic Model Providing a mathematical optimization model for the multi-product supply chain despite the possibility of supplier disruption under sanctions (Case Study of Refinery Repair Industries) [Volume 18, Issue 60, 2020, Pages 107-125]
U
  • Uncertainty Design of an Estimator Based on Duality Principle for Unknown and Time-varying Delay Estimation in LTI Systems [Volume 18, Issue 60, 2020, Pages 143-156]
  • UWB filter The UWB filter with using stepped-impedance method and improving out of band rejection [Volume 18, Issue 61, 2020, Pages 13-19]
V
  • VIKOR Supplier selection using the hybrid fuzzy ANP-DEMATE-VIKOR approach [Volume 18, Issue 60, 2020, Pages 87-105]
  • Visibility Criterion The performance investigation of discontinuity definition techniques on numerical solution of crack problems by meshless method [Volume 18, Issue 62, 2020, Pages 115-128]
  • VoIP A new dynamic EDCA mechanism to improve VoIP services in 802.11ac networks [Volume 18, Issue 61, 2020, Pages 21-34]
  • Voting Mechanism An Intelligent Hybrid Segmentation Model Based on Fuzzy Logic, Discrete Wavelet Transform In Digital Imaging for Detection of Gastric Cancer [Volume 18, Issue 63, 2020, Pages 131-150]
W
  • Wavelet Transform Script independent offline writer identification from handwriting samples based on texture using wavelet transform in Persian-English languages [Volume 18, Issue 63, 2020, Pages 1-13]
  • Weibull distribution An Analytical Model to Evaluate the Effects of Wind Turbine Parameters and the Probabilistic Characteristic of Wind Speed on the Average LMP of the Power Market [Volume 18, Issue 62, 2020, Pages 31-42]
  • Wind Farm Modeling Doubly Fed Induction Generator Based Wind Farms by Aggregating the Mechanical Parts Using Clustering by Power Coefficient [Volume 18, Issue 60, 2020, Pages 169-182]
  • Wind Turbine Parameters An Analytical Model to Evaluate the Effects of Wind Turbine Parameters and the Probabilistic Characteristic of Wind Speed on the Average LMP of the Power Market [Volume 18, Issue 62, 2020, Pages 31-42]
  • Writer identification Script independent offline writer identification from handwriting samples based on texture using wavelet transform in Persian-English languages [Volume 18, Issue 63, 2020, Pages 1-13]