[1] Ligon, Samuel Clark, Robert Liska, Jurgen Stampfl, Matthias Gurr, and Rolf Mülhaupt. "Polymers for 3D printing and customized additive manufacturing". Chemical reviews 117, no. 15 (2017) : 10212-10290.
[2] Deckard, Carl R. "Method and apparatus for producing parts by selective sintering." (1991).
[3] Papazoglou, Emmanouil L., Nikolaos E. Karkalos, Panagiotis Karmiris-Obratański, and Angelos P. Markopoulos. "On the modeling and simulation of SLM and SLS for metal and polymer powders: a review." Archives of Computational Methods in Engineering (2022): 1-33.
[4] Khan, Mushtaq, and Phill Dickens. "Selective laser melting (SLM) of pure gold ". Gold bulletin 43, no. 2 (2010) : 114-121.
[5] Liverani, Erica, Stefania Toschi, Lorella Ceschini, and Alessandro Fortunato. "Effect of selective laser melting (SLM) process parameters on microstructure and mechanical properties of 316L austenitic stainless steel." Journal of Materials Processing Technology 249 (2017): 255-263.
[6] Elsayed, Mahmoud, Mootaz Ghazy, Yehia Youssef, and Khamis Essa. "Optimization of SLM process parameters for Ti6Al4V medical implants." Rapid Prototyping Journal 25, no. 3 (2018): 433-447.
[7] Karmiris-Obratański, Panagiotis, Emmanouil L. Papazoglou, Nikolaos E. Karkalos, and Angelos P. Markopoulos. "Volume energy density and laser power: Key determinants in SLS-processed PA12 mechanical properties." The International Journal of Advanced Manufacturing Technology 130, no. 5 (2024): 2505-2522.
[8] Faraj, Zainab, Smail Zaki, Mohamed Aboussaleh, and Hamid Abouchadi. "Influence of processing parameters on tensile properties of PA12 parts manufactured by selective laser sintering." The International Journal of Advanced Manufacturing Technology 128, no. 3-4 (2023): 1115-1125.
[9] El Magri, Anouar, Salah Eddine Bencaid, Hamid Reza Vanaei, and Sébastien Vaudreuil. "Effects of Laser Power and Hatch Orientation on Final Properties of PA12 Parts Produced by Selective Laser Sintering." Polymers 14, no. 17 (2022): 3674.
[10] Hou, Gaoyan, Hong Zhu, and Dan Xie. "The Influence of SLS Process Parameters on the Tensile Strength of PA2200 Powder." In IOP Conference Series: Earth and Environmental Science, vol. 571, no. 1, p. 012111. IOP Publishing, 2020.
[11] Fateri, Miranda, Andreas Gebhardt, Stefan Thuemmler, and Laura Thurn. "Experimental investigation on selective laser melting of glass." Physics Procedia 56 (2014): 357-364.
[12] Juste, Enrique, Fabrice Petit, Véronique Lardot, and Francis Cambier. "Shaping of ceramic parts by selective laser melting of powder bed." Journal of Materials Research 29, no. 17 (2014): 2086-2094.
[13] Tran, Hong-Chuong, and Yu-Lung Lo. "Heat transfer simulations of selective laser melting process based on volumetric heat source with powder size consideration." Journal of Materials Processing Technology 255 (2018): 411-425.
[14] Boschetto, Alberto, Luana Bottini, Luciano Macera, and Francesco Veniali. "Post-processing of complex SLM parts by barrel finishing." Applied Sciences 10, no. 4 (2020): 1382.
[15] Ye, Chang, Chaoyi Zhang, Jingyi Zhao, and Yalin Dong. "Effects of post-processing on the surface finish, porosity, residual stresses, and fatigue performance of additive manufactured metals: a review." Journal of Materials Engineering and Performance 30 (2021): 6407-6425.
[16] Weaver, Jordan S., Jarred C. Heigel, and Brandon M. Lane. "Laser spot size and scaling laws for laser beam additive manufacturing." Journal of Manufacturing Processes 73 (2022): 26-39.
[17] Dinh, Ba Bach, Yanling Guo, Tat Thang Nguyen, and Nho Tho Tran. "Optimize print speed and laser power of the 3D printing technology selective laser sintering (SLS) for mixture of powder materials green bean and polylactic acid (GBP/PLA)." In IOP Conference Series: Materials Science and Engineering, vol. 782, no. 2, p. 022111. IOP Publishing, 2020.
[19] Bäuerle, Dieter. "Laser Processing and Chemistry [electronic resource]." (2000).
[20] Kaselouris, E., I.K. Nikolos, Y. Orphanos, E. Bakarezos, N.A. Papadogiannis, M. Tatarakis, and V. Dimitriou. "A review of simulation methods of laser matter interactions focused on nanosecond laser pulsed systems." Journal of Multiscale Modelling 5, no. 04 (2013): 1330001.
[21] Thümmler, Fritz, and Rainer Oberacker. "An introduction to powder metallurgy." Institute of Materials, (1993).
[22] Foroozmehr, Ali, Mohsen Badrossamay, Ehsan Foroozmehr, and Sa’id Golabi. "Finite element simulation of selective laser melting process considering optical penetration depth of laser in powder bed." Materials & Design 89 (2016): 255-263.
[23] Hussein, Ahmed, Liang Hao, Chunze Yan, and Richard Everson. "Finite element simulation of the temperature and stress fields in single layers built without-support in selective laser melting." Materials & Design (1980-2015) 52 (2013): 638-647.
[24] Martienssen, Werner, and Hans Warlimont, eds. Springer handbook of condensed matter and materials data. Springer Science & Business Media, 2006.
[26] De Gracia, Alvaro, and Luisa F. Cabeza. "Phase change materials and thermal energy storage for buildings." Energy and Buildings 103 (2015): 414-419.
[27] Yang, C., M.E. Navarro, B. Zhao, G. Leng, G. Xu, L. Wang, Y. Jin, and Y. Ding. "Thermal conductivity enhancement of recycled high density polyethylene as a storage media for latent heat thermal energy storage." Solar Energy Materials and Solar Cells 152 (2016): 103-110.
[29] Sobolciak, Patrik, Asma Abdulgader, Miroslav Mrlik, Anton Popelka, Ahmed A. Abdala, Abdelnasser A. Aboukhlewa, Mustapha Karkri, Hendrik Kiepfer, Hans-Joerg Bart, and Igor Krupa. "Thermally conductive polyethylene/expanded graphite composites as heat transfer surface: Mechanical, thermo-physical and surface behavior." Polymers 12, no. 12 (2020): 2863.
[30] Vora, Hitesh D., Soundarapandian Santhanakrishnan, Sandip P. Harimkar, Sandra KS Boetcher, and Narendra B. Dahotre. "One-dimensional multipulse laser machining of structural alumina: evolution of surface topography." The International Journal of Advanced Manufacturing Technology 68 (2013): 69-83.