مدل سازی در مهندسی

مدل سازی در مهندسی

مدل‌سازی و تحلیل ترمودینامیکی عملکرد یک مبدل حرارتی با هدف کاهش دمای گازهای خروجی از موتور دیزل

نوع مقاله : مقاله پژوهشی

نویسندگان
1 مجتمع دانشگاهی هوافضا، دانشگاه صنعتی مالک‌اشتر، تهران، ایران
2 عضو هیات علمی / دانشگاه صنعتی مالک اشتر
3 دانشکده مکانیک، دانشگاه علم و صنعت، تهران، ایران
چکیده
در سامانه‌های خنک‌کاری و بازیافت حرارت گاز خروجی موتورهای دیزل، انتخاب نوع مبدل حرارتی و اصلاحات هندسی آن باید از نظر انتقال حرارت، افت فشار و عملکرد ترمودینامیکی ارزیابی شود. در این پژوهش، عملکرد مبدل‌های حرارتی دولوله‌ای و پوسته‌ولوله با هدف کاهش دمای جریان داغ، بر اساس تحلیل انرژی و قانون دوم ترمودینامیک مقایسه شد. عملکرد حرارتی- هیدرولیکی مبدل‌ها بر اساس نرخ انتقال حرارت، دماهای خروجی و افت فشار ارزیابی شد و نرخ تولید آنتروپی، نرخ تخریب اگزرژی و بازده‌های قانون اول و دوم ترمودینامیک محاسبه شدند. همچنین، اثر تغییرات طراحی، شامل آرایش لوله‌ها، تعداد و نوع بافل‌ها و به‌کارگیری فین‌ها، بر عملکرد مبدل‌ها بررسی شد. نتایج نشان داد که در مبدل پوسته‌ولوله نوع BEM با 48 لوله و آرایش مثلثی 30 درجه، نرخ انتقال حرارت در دو حالت حداقل و حداکثر به‌ترتیب 32 و ۵۱٫۷ کیلووات بود. برای همین پیکربندی، بازده قانون اول به‌ترتیب 39/31% و 36/09% و بازده قانون دوم 9/826% و 19/52% به‌دست آمد. همچنین، افزودن بافل‌های برشی و فین‌ها موجب افزایش نرخ انتقال حرارت شد، هرچند با افزایش افت فشار همراه بود. نتایج بر اهمیت ارزیابی هم‌زمان عملکرد حرارتی- هیدرولیکی و شاخص‌های ترمودینامیکی در مقایسه مبدل‌های حرارتی مورد استفاده برای کاهش دمای گاز خروجی موتورهای دیزل تأکید می‌کنند.
کلیدواژه‌ها
موضوعات

عنوان مقاله English

Thermodynamic Modeling and Analysis of a Heat Exchanger's Performance Aimed at Reducing Diesel Engine Exhaust Gas Temperature

نویسندگان English

Amir Abedi 1
Jamasb Pirkandi 2
mostafa mahmoodi 1
Erfan Ebadati 3
1 Faculty of Aerospace, Malek Ashtar University of Technology, Tehran, Iran
2 Malek Ashtar University of Technology
3 School of Mechanical Engineering, Iran University of Science and Technology (IUST), University Tehran, Iran
چکیده English

In cooling and waste heat recovery systems for diesel engine exhaust gases, the selection of heat exchanger type and its geometrical modifications should be evaluated in terms of heat transfer, pressure drop, and thermodynamic performance. In this study, the performance of double-pipe and shell-and-tube heat exchangers was compared for the purpose of reducing the temperature of the hot stream, based on energy analysis and the second law of thermodynamics. The thermal-hydraulic performance of the heat exchangers was evaluated based on the heat transfer rate, outlet temperatures, and pressure drop, while the entropy generation rate, exergy destruction rate, and first- and second-law efficiencies were calculated. Furthermore, the effects of design variations, including tube arrangement, the number and type of baffles, and the use of fins, on heat exchanger performance were investigated. The results showed that, for the BEM-type shell-and-tube heat exchanger with 48 tubes and a 30° triangular tube arrangement, the heat transfer rate was 32 and 51.7 kW in the minimum and maximum cases, respectively. For the same configuration, the first-law efficiencies were 39.31% and 36.09%, respectively, while the second-law efficiencies were 9.826% and 19.52%. In addition, the use of segmental baffles and fins increased the heat transfer rate, although this was accompanied by an increase in pressure drop. The results highlight the importance of simultaneously evaluating thermal-hydraulic performance and thermodynamic indicators when comparing heat exchangers used to reduce diesel engine exhaust gas temperatures.

کلیدواژه‌ها English

Heat Exchanger
Shell and tube
Double-pipe
Entropy
Exergy

مقالات آماده انتشار، پذیرفته شده
انتشار آنلاین از 01 آذر 1405

  • تاریخ دریافت 18 آذر 1404
  • تاریخ بازنگری 01 آبان 1405
  • تاریخ پذیرش 12 آبان 1405