Abbasi, Mohammad Javad A new combined method to diagnosis loss of excitation from stable power swing in doubly fed induction generator [Volume 15, Issue 51, 2017, Pages 159-169]
Abbasian Arani, Ali Akbar Numerical Study of fluid flow and heat transfer of mixed convection and entropy generation in a L-shaped cavity filled with nanofluid [Volume 15, Issue 50, 2017, Pages 135-147]
Abbasi Sooreshjani, Mehran Parametric study on lateral resistance and evaluation of seismic response modification factor-R of strap-braced cold-formed steel shear walls [Volume 15, Issue 49, 2017, Pages 175-188]
Abbas Nejad, Ali Simultaneously Optimization of Solar Water Heater Design Parameters Considering Consumption Patterns [Volume 15, Issue 48, 2017, Pages 111-123]
Abolbashari, Mohammad Hossein Performance of the Evolutionary Structural Optimization for Material with Elasto-Plastic Behavior [Volume 15, Issue 50, 2017, Pages 149-167]
Afzalnejad, Omid Investigation of Chirality Effect on Axial and Torsional Buckling Behavior of SWCNTs Using Finite Element Method [Volume 15, Issue 48, 2017, Pages 61-71]
Aghaee, Alireza Numerical Study of fluid flow and heat transfer of mixed convection and entropy generation in a L-shaped cavity filled with nanofluid [Volume 15, Issue 50, 2017, Pages 135-147]
Aghaee, Alireza Numerical Study of fluid flow and heat transfer of mixed convection and entropy generation in a L-shaped cavity filled with nanofluid [Volume 15, Issue 50, 2017, Pages 135-147]
Ahmadi, Iraj CT Saturation Detection with Calculation of Instantaneous Impedance of Magnetic Branch Using FILT [Volume 15, Issue 51, 2017, Pages 371-380]
Ahmadi, M. Natural convection of Al2O3-water nanofluid with variable properties in a square enclosure with heat source and heat sink on the vertical walls [Volume 15, Issue 49, 2017, Pages 1-16]
Ahmadi, Saman Modeling and simulation of Energy managements for fuel cell hybrid vehicle [Volume 15, Issue 50, 2017, Pages 1-16]
Ahmadi Danesh Ashtiyani, Fakhroddin NUMERICALLY INVESTIGATION OF THE BEHAVIOR OF LONG LINK-TO-COLUMN CONNECTIONS WITH REDUCED SECTION [Volume 15, Issue 49, 2017, Pages 151-160]
Ajam, Hossein Numerical and Experimental Study of Ventilation Effects on Ventilated Cavitating Flow [Volume 15, Issue 51, 2017, Pages 29-41]
Akbarzadeh, Pooria The effect of the blowing and suction from one or two positions over the suction surface of NACA0012 airfoil on aerodynamic performance in turbulent flow [Volume 15, Issue 51, 2017, Pages 331-340]
Alamatian, Javad the TMD design based on complex stiffness theory [Volume 15, Issue 51, 2017, Pages 171-180]
Alimirzaloo, Vali Optimization of the roll forming process of U channels using a hybrid response surface and desirability function approach [Volume 15, Issue 51, 2017, Pages 237-250]
Alizadeh, Adel Modeling of fatigue life in double shear lap joints using artificial neural networks [Volume 15, Issue 49, 2017, Pages 55-63]
Amidpour, Majid Simultaneously Optimization of Solar Water Heater Design Parameters Considering Consumption Patterns [Volume 15, Issue 48, 2017, Pages 111-123]
Amjady, Nima Probabilistic optimal power flow to determine the Locational marginal price considering wind generation [Volume 15, Issue 48, 2017, Pages 165-182]
Amjady, Nima Anti-Hazard Wrist Strap with the capability of sensing phase to phase electrocution by using of RF transceivers modules [Volume 15, Issue 51, 2017, Pages 147-157]
Amjady, Nima Prediction of operating conditions of the power system considering reactive power limits of generators and dynamic voltage stability margin by using neural network [Volume 15, Issue 51, 2017, Pages 341-350]
Amjady, Nima Static Security Evaluation of Power Systems Considering Uncertainties Using a Point Estimation Method [Volume 15, Issue 51, 2017, Pages 359-370]
Asadi Amiri, Sekine Provide a method for image preprocessing to improve the performance of JPEG 2000 in image compression [Volume 15, Issue 48, 2017, Pages 247-258]
Ashatri, payam Prediction of dynamic response of fluid in elevated water tanks using artificial neural network model [Volume 15, Issue 48, 2017, Pages 139-150]
Azimi, Aziz Investigate on Non-Fourier Heat Conduction in Sand Using Models based on Fractional Calculus [Volume 15, Issue 48, 2017, Pages 15-22]
B
Babaei, Ebrahim A New Method of Modeling for Cuk Converter Based on Signal Flow Graph Approach and its Control by using a Mixed Sensitivity Type Robust Technique [Volume 15, Issue 51, 2017, Pages 275-288]
Bagheri pourasil, Meysam Progressive collapse analysis methods due to blast loading in steel moment frames [Volume 15, Issue 51, 2017, Pages 51-65]
Bannae Sharifian, Mohammad Bagher A New Method of Modeling for Cuk Converter Based on Signal Flow Graph Approach and its Control by using a Mixed Sensitivity Type Robust Technique [Volume 15, Issue 51, 2017, Pages 275-288]
Baradaran Kazemzadeh, Reza Developing a Mathematical Model for Determination of Asset Management Strategy Based on Maintenance and Procurement Factors [Volume 15, Issue 51, 2017, Pages 1-13]
Basirat, shamsa Application of Euler- Euler method in estimation of maximum depth of local scour [Volume 15, Issue 51, 2017, Pages 289-298]
Bathaee, S.M.T Modeling and simulation of Energy managements for fuel cell hybrid vehicle [Volume 15, Issue 50, 2017, Pages 1-16]
Bayat, Reza Vibration control of laminated composite beam with magnetostrictive layers [Volume 15, Issue 48, 2017, Pages 1-13]
Bayati, Hassan Investigate on Non-Fourier Heat Conduction in Sand Using Models based on Fractional Calculus [Volume 15, Issue 48, 2017, Pages 15-22]
Beheshtinia, Mohammad Ali A Combination of Fuzzy AHP and TOPSIS Method for the Supplier Selection Problem (Case Study: Advertising Company) [Volume 15, Issue 48, 2017, Pages 217-229]
Beheshtinia, Mohammad Ali Modeling the process of services quality increasing using QFD, AHP and Knapsack problem with fuzzy approach (A case study: police services) [Volume 15, Issue 51, 2017, Pages 67-84]
Beigi-Harchegani, Maryam Numerical Study of Heat Transfer and Pressure Drop in Forced-convection Nanofluid flow through an internally ribbed pipe [Volume 15, Issue 49, 2017, Pages 65-76]
Beiki, Hossein Numerical investigation on effect of silica nanoparticles on the middle layer of salt gradient solar ponds [Volume 15, Issue 50, 2017, Pages 49-61]
C
Chaharsooghi, S. Kamal A Bi-Level Programming Model for Closed-Loop Supply Chain Network Design with Competition between two chains in Uncertain Environment: A Benders Decomposition Solution [Volume 15, Issue 49, 2017, Pages 201-215]
D
Dolatnejad, Azam A Hybrid Modified Ant Colony for Solving the Capacitated Open Vehicle Routing Problem [Volume 15, Issue 50, 2017, Pages 179-191]
Doralizadeh, Mohammad Masab Modeling and analysis of nonlinear Oscillations of atomic force microscopy in liquid environment [Volume 15, Issue 51, 2017, Pages 209-224]
E
Ebrahimi, Saeed Analytical solution of nonlinear rolling motion of ship using the method of multiple scales [Volume 15, Issue 49, 2017, Pages 125-137]
Ebrahimikhosroshahi, Mohammadreza Optimization of the roll forming process of U channels using a hybrid response surface and desirability function approach [Volume 15, Issue 51, 2017, Pages 237-250]
Eskandari, Hamidreza A Bi-Level Programming Model for Closed-Loop Supply Chain Network Design with Competition between two chains in Uncertain Environment: A Benders Decomposition Solution [Volume 15, Issue 49, 2017, Pages 201-215]
Eskandari, Hamidreza Developing a Mathematical Model for Determination of Asset Management Strategy Based on Maintenance and Procurement Factors [Volume 15, Issue 51, 2017, Pages 1-13]
Ezani, Javad DEVELOPMENT OF A DYNAMIC MODEL FOR SIMULATION OF REAL-TIME TRANSIENT TURBOJET ENGINE PERFORMANCE IN SIMULINK [Volume 15, Issue 50, 2017, Pages 95-108]
F
Fallah, Hamed A Bi-Level Programming Model for Closed-Loop Supply Chain Network Design with Competition between two chains in Uncertain Environment: A Benders Decomposition Solution [Volume 15, Issue 49, 2017, Pages 201-215]
Fallahi, Alireza CT Saturation Detection with Calculation of Instantaneous Impedance of Magnetic Branch Using FILT [Volume 15, Issue 51, 2017, Pages 371-380]
Farahat, Said Numerical and Experimental Study of Ventilation Effects on Ventilated Cavitating Flow [Volume 15, Issue 51, 2017, Pages 29-41]
Faraji, Mohammad DEVELOPMENT OF A DYNAMIC MODEL FOR SIMULATION OF REAL-TIME TRANSIENT TURBOJET ENGINE PERFORMANCE IN SIMULINK [Volume 15, Issue 50, 2017, Pages 95-108]
Farzam, Masood Effect of the axial force and material strength on the seismic behavior of the short shear walls [Volume 15, Issue 48, 2017, Pages 125-137]
Fathi, Mojtaba Finite elements analysis of a New Moment-Resistant Connection in Precast Concrete Frames under cyclic loading [Volume 15, Issue 49, 2017, Pages 189-200]
Fekri, Roxana Modelling uncertainty in performance appraisal process based on evidence theory and fuzzy theory [Volume 15, Issue 51, 2017, Pages 411-432]
Freidoonimehr, navid Entropy Generation Analysis for an MHD Slip Nano-Fluid Flow over a Stretching Permeable Surface [Volume 15, Issue 49, 2017, Pages 39-53]
Freidoonimehr, Navid Parametric analysis and optimization of the supercritical ejector refrigeration cycle with different working fluids using Artificial neural network and particle swarm optimization algorithm [Volume 15, Issue 50, 2017, Pages 121-133]
G
GH, M Static Security Evaluation of Power Systems Considering Uncertainties Using a Point Estimation Method [Volume 15, Issue 51, 2017, Pages 359-370]
Ghaderi, Reza Investigation of Nonlinear Vibration Behavior of Piezoelectric Micro-Beam Interacting with Spherical Nano Particles [Volume 15, Issue 48, 2017, Pages 85-98]
Ghahfarokhi, Zahra Numerical Study of fluid flow and heat transfer of mixed convection and entropy generation in a L-shaped cavity filled with nanofluid [Volume 15, Issue 50, 2017, Pages 135-147]
Ghanizadeh, Mohammad Effect of the axial force and material strength on the seismic behavior of the short shear walls [Volume 15, Issue 48, 2017, Pages 125-137]
Gholami, Shahab Investigate on Non-Fourier Heat Conduction in Sand Using Models based on Fractional Calculus [Volume 15, Issue 48, 2017, Pages 15-22]
Gholami fard, Milad Probabilistic optimal power flow to determine the Locational marginal price considering wind generation [Volume 15, Issue 48, 2017, Pages 165-182]
Gholizad, Amin Progressive collapse analysis methods due to blast loading in steel moment frames [Volume 15, Issue 51, 2017, Pages 51-65]
Gohrrokhi, Ali Evaluation of steel plate shear walls based on performance based plastic design [Volume 15, Issue 51, 2017, Pages 381-396]
H
Haghani, Amad Investigation of Nonlinear Vibration Behavior of Piezoelectric Micro-Beam Interacting with Spherical Nano Particles [Volume 15, Issue 48, 2017, Pages 85-98]
Haji Aboutalebi, Farhad Numerical Simulation of Machining Processes by Using Hooputra's Shear Damage Criterion [Volume 15, Issue 49, 2017, Pages 101-109]
Hajikazemi, Hassan Application of FRP Material in Buckling Restrained Braces. [Volume 15, Issue 50, 2017, Pages 225-236]
Haji Kazemi, Hassan Investigation of Wind Pressure on Fabric Structures with Conical Form Using CFD [Volume 15, Issue 51, 2017, Pages 181-195]
Hakim pour, Farshad The Assessment and Comparison of a Genetic Algorithm, Simulated Annealing and Cuckoo Optimization Algorithm for Optimization of the Facility Location under Competitive Conditions (Case Study: Banks) [Volume 15, Issue 48, 2017, Pages 231-246]
Harimi, Ali improving speech emotion recognition via gender classification [Volume 15, Issue 48, 2017, Pages 183-200]
Hasani, Ali akbar A Hybrid Metaheuristic Algorithm for Robust Two-stage Flexible Flow Shop scheduling with Dedicated Assembly Lines under Uncertainty [Volume 15, Issue 50, 2017, Pages 25-47]
Hasani, Aliakbar Two Stage Stochastic Programing Based on the Sample Average Approximation and Accelerated Benders Decomposition for Designing Closed-loop Supply Chain Network Design under Uncertainty [Volume 15, Issue 49, 2017, Pages 217-234]
Hashemi Majd, Mahsa A Systematic Literature Review on Software Reliability Modeling [Volume 15, Issue 50, 2017, Pages 285-313]
Hassani, reza Finite elements analysis of a New Moment-Resistant Connection in Precast Concrete Frames under cyclic loading [Volume 15, Issue 49, 2017, Pages 189-200]
Heidari-Rarani, Mohammad Exact solution for frequency equations of radial and transverse vibration of a circular plate with various boundary conditions [Volume 15, Issue 50, 2017, Pages 169-178]
Heydari, Jafar A mathematical model for coordinating corporate social responsibility and order quantity in pharmaceutical supply chain [Volume 15, Issue 50, 2017, Pages 245-260]
Hoseini Vaez, Seyed Rohollah Estimating Maximum Rotation of Beam of R.C. Momentâresisting Frames Using Equivalent Pulses of Near-fault Motions [Volume 15, Issue 50, 2017, Pages 193-210]
Hosseini-Chaleshtori, Shahram Exact solution for frequency equations of radial and transverse vibration of a circular plate with various boundary conditions [Volume 15, Issue 50, 2017, Pages 169-178]
Hosseini-Motlagh, Seyyed-Mahdi A mathematical model for coordinating corporate social responsibility and order quantity in pharmaceutical supply chain [Volume 15, Issue 50, 2017, Pages 245-260]
Hossein Nezhad, Alireza Numerical and Experimental Study of Ventilation Effects on Ventilated Cavitating Flow [Volume 15, Issue 51, 2017, Pages 29-41]
J
Jahan Abadi, Mojtabaa Estimating Maximum Rotation of Beam of R.C. Momentâresisting Frames Using Equivalent Pulses of Near-fault Motions [Volume 15, Issue 50, 2017, Pages 193-210]
Jahangiri, Mehdi Investigation of Nonlinear Vibration Behavior of Piezoelectric Micro-Beam Interacting with Spherical Nano Particles [Volume 15, Issue 48, 2017, Pages 85-98]
Jahangoshai Rezaee, Mustafa An integrated model for selecting efficient suppliers in a competitive environment under uncertain demand [Volume 15, Issue 51, 2017, Pages 299-317]
Jahromi, Mehdi DEVELOPMENT OF A DYNAMIC MODEL FOR SIMULATION OF REAL-TIME TRANSIENT TURBOJET ENGINE PERFORMANCE IN SIMULINK [Volume 15, Issue 50, 2017, Pages 95-108]
Jalili, Mohammad Mahdi Analytical solution of nonlinear rolling motion of ship using the method of multiple scales [Volume 15, Issue 49, 2017, Pages 125-137]
Javadpour, Seyed Morteza Numerical and Experimental Study of Ventilation Effects on Ventilated Cavitating Flow [Volume 15, Issue 51, 2017, Pages 29-41]
K
Keramati, Abbas Modelling uncertainty in performance appraisal process based on evidence theory and fuzzy theory [Volume 15, Issue 51, 2017, Pages 411-432]
Keshtegar, Behrooz FIRST OREDR RELIABILITY METHOD OF STRACTURS USINGA IMPRVED HARMONY SEARCH OPTIMIZATION [Volume 15, Issue 51, 2017, Pages 15-27]
Khajevandi, Issa Prediction of operating conditions of the power system considering reactive power limits of generators and dynamic voltage stability margin by using neural network [Volume 15, Issue 51, 2017, Pages 341-350]
Khajooei-Gharaei, Masoomeh Performance of the Evolutionary Structural Optimization for Material with Elasto-Plastic Behavior [Volume 15, Issue 50, 2017, Pages 149-167]
Khodayari, Aliasghar Simultaneous optimization of cut-off grade and capacity of mineral processing plant [Volume 15, Issue 49, 2017, Pages 235-244]
Khorram, Esmaile A Hybrid Modified Ant Colony for Solving the Capacitated Open Vehicle Routing Problem [Volume 15, Issue 50, 2017, Pages 179-191]
M
Mahmoodi, Masoud Prediction of Mechanical Properties of Equal Channel Angular Rolled Al6061 Alloy Sheet Using Artificial Neural Networks and Nonlinear Regression [Volume 15, Issue 51, 2017, Pages 197-207]
Modanloo, Vahid Optimization of the roll forming process of U channels using a hybrid response surface and desirability function approach [Volume 15, Issue 51, 2017, Pages 237-250]
Mohagheghian, shahriar Numerical Simulation of Machining Processes by Using Hooputra's Shear Damage Criterion [Volume 15, Issue 49, 2017, Pages 101-109]
Mohammadi, Yaghoub Progressive collapse analysis methods due to blast loading in steel moment frames [Volume 15, Issue 51, 2017, Pages 51-65]
Mohammadian, Leila A New Method of Modeling for Cuk Converter Based on Signal Flow Graph Approach and its Control by using a Mixed Sensitivity Type Robust Technique [Volume 15, Issue 51, 2017, Pages 275-288]
Mohebbi, Mohtasham Optimal Design of Active Multiple Tuned Mass Dampers (AMTMDs) For Nonlinear Hysteretic Structures [Volume 15, Issue 48, 2017, Pages 151-163]
Mohebzadeh, Ahmad Design and Modeling of Biosensor Based on Photonic Crystal Nano Resonator [Volume 15, Issue 51, 2017, Pages 351-358]
Mokhtari, Hadi Modeling and Solution of Job Shop Scheduling with No-Wait Orders to Minimize Makespan: A Decomposition Approach based on Order Sequencing and Timetabling [Volume 15, Issue 50, 2017, Pages 261-270]
Moradi bastani, Majid A Study of Investigation and Experimental Comparison Result of the Incompressible Turbulent Flow Pressure Drop through the Multistage Industrial orifices [Volume 15, Issue 48, 2017, Pages 99-109]
Mostafavi, Mahsa The effect of the blowing and suction from one or two positions over the suction surface of NACA0012 airfoil on aerodynamic performance in turbulent flow [Volume 15, Issue 51, 2017, Pages 331-340]
Motaghedi Barforoush, Mohammad Sadegh Numerical Investigation of Convection and Radiation Heat Loss Reduction between Two Finite Concentric Cylinders Using Radiation Shields [Volume 15, Issue 50, 2017, Pages 63-74]
Motaghedi Barforoush, Mohammad Sadegh Convection and Radiation Heat Loss Reduction between Two Finite Concentric Cylinders Using Radiation Shields at Different Pressure: Experimental Study [Volume 15, Issue 50, 2017, Pages 75-84]
N
N, A Modeling of index-guiding photonic crystal fiber with low-chromatic dispersion and low-nonlinearity effect [Volume 15, Issue 50, 2017, Pages 17-24]
Naderi Bakhtiari, Ali Prediction of Mechanical Properties of Equal Channel Angular Rolled Al6061 Alloy Sheet Using Artificial Neural Networks and Nonlinear Regression [Volume 15, Issue 51, 2017, Pages 197-207]
Nahid Titkanlu, Hossein Modelling uncertainty in performance appraisal process based on evidence theory and fuzzy theory [Volume 15, Issue 51, 2017, Pages 411-432]
Navid Chakherlou, Tajbakh Modeling of fatigue life in double shear lap joints using artificial neural networks [Volume 15, Issue 49, 2017, Pages 55-63]
Nazari, Foad Parametric analysis and optimization of the supercritical ejector refrigeration cycle with different working fluids using Artificial neural network and particle swarm optimization algorithm [Volume 15, Issue 50, 2017, Pages 121-133]
Nemati-Abozar, Vahid A Combination of Fuzzy AHP and TOPSIS Method for the Supplier Selection Problem (Case Study: Advertising Company) [Volume 15, Issue 48, 2017, Pages 217-229]
Nematollahi, Mohammadreza A mathematical model for coordinating corporate social responsibility and order quantity in pharmaceutical supply chain [Volume 15, Issue 50, 2017, Pages 245-260]
Nobil, Amir Hossein Lot sizing with defective item under warehouse limitation and construction costs [Volume 15, Issue 51, 2017, Pages 43-50]
Norouzi, Mahmod Numerical investigation of vortices effect on the pressure drop and flow loss in a channel with planar gradual expansion [Volume 15, Issue 48, 2017, Pages 45-60]
O
Olyaee, Saeed Design and Modeling of Biosensor Based on Photonic Crystal Nano Resonator [Volume 15, Issue 51, 2017, Pages 351-358]
P
Pirkandi, Jamasb DEVELOPMENT OF A DYNAMIC MODEL FOR SIMULATION OF REAL-TIME TRANSIENT TURBOJET ENGINE PERFORMANCE IN SIMULINK [Volume 15, Issue 50, 2017, Pages 95-108]
R
Rahmani, Morteza Multi objective Model of airport gate scheduling problem using NSGA-II algorithm and epsilon constraint [Volume 15, Issue 51, 2017, Pages 397-410]
Rahmani, Omid Vibration control of laminated composite beam with magnetostrictive layers [Volume 15, Issue 48, 2017, Pages 1-13]
Rahmat, Neda Analytical solution of nonlinear rolling motion of ship using the method of multiple scales [Volume 15, Issue 49, 2017, Pages 125-137]
Raissi Dehkordi, Alireza Evaluation of steel plate shear walls based on performance based plastic design [Volume 15, Issue 51, 2017, Pages 381-396]
Rajabi Khanghahi, Abbas Simultaneously Optimization of Solar Water Heater Design Parameters Considering Consumption Patterns [Volume 15, Issue 48, 2017, Pages 111-123]
Rajabi Zargarabadi, Mehran Film cooling effectiveness enhancement of rotating turbine blade using Shaped holes [Volume 15, Issue 51, 2017, Pages 225-236]
Rakhshani Mehr, Mehrallah Seismic risk analysis and mapping acceleration Nishapur city [Volume 15, Issue 50, 2017, Pages 211-223]
Ramezani, Nabiollah CT Saturation Detection with Calculation of Instantaneous Impedance of Magnetic Branch Using FILT [Volume 15, Issue 51, 2017, Pages 371-380]
Ranjbar, Abolfazl The Assessment and Comparison of a Genetic Algorithm, Simulated Annealing and Cuckoo Optimization Algorithm for Optimization of the Facility Location under Competitive Conditions (Case Study: Banks) [Volume 15, Issue 48, 2017, Pages 231-246]
Rasoolzadegan, Abbas A Systematic Literature Review on Software Reliability Modeling [Volume 15, Issue 50, 2017, Pages 285-313]
Razzazi, Mohhamdreza A Novel Model for Software Services Development Effort Estimation [Volume 15, Issue 49, 2017, Pages 245-261]
Rezaee, M. Natural convection of Al2O3-water nanofluid with variable properties in a square enclosure with heat source and heat sink on the vertical walls [Volume 15, Issue 49, 2017, Pages 1-16]
Rezaeian, Alireza Evaluation of steel plate shear walls based on performance based plastic design [Volume 15, Issue 51, 2017, Pages 381-396]
Rikhtegare Giasi, amir Robustness of Magnetic Levitation by Using Feedback Linearization Back-Stepping and Nonlinear Disturbance Observer [Volume 15, Issue 49, 2017, Pages 29-38]
Rouhparvar, Mohammadreza Application of FRP Material in Buckling Restrained Braces. [Volume 15, Issue 50, 2017, Pages 225-236]
S
S, A Numerical investigation on effect of silica nanoparticles on the middle layer of salt gradient solar ponds [Volume 15, Issue 50, 2017, Pages 49-61]
S, M Modeling of index-guiding photonic crystal fiber with low-chromatic dispersion and low-nonlinearity effect [Volume 15, Issue 50, 2017, Pages 17-24]
Saadatjoo, Fatemeh Performance Evaluation of WW and WD Concurrency Control Algorithms for Database Management, via Modeling by Colored Petri Net [Volume 15, Issue 51, 2017, Pages 99-111]
Saadatjoo, Mohammad Ali Performance Evaluation of WW and WD Concurrency Control Algorithms for Database Management, via Modeling by Colored Petri Net [Volume 15, Issue 51, 2017, Pages 99-111]
Saedodin, Seyfolah Numerical Investigation of Convection and Radiation Heat Loss Reduction between Two Finite Concentric Cylinders Using Radiation Shields [Volume 15, Issue 50, 2017, Pages 63-74]
Saedodin, Seyfolah Convection and Radiation Heat Loss Reduction between Two Finite Concentric Cylinders Using Radiation Shields at Different Pressure: Experimental Study [Volume 15, Issue 50, 2017, Pages 75-84]
Saffariyan, Farzam Simultaneous optimization of cut-off grade and capacity of mineral processing plant [Volume 15, Issue 49, 2017, Pages 235-244]
Salari, Mahmoud Numerical and Experimental Study of Ventilation Effects on Ventilated Cavitating Flow [Volume 15, Issue 51, 2017, Pages 29-41]
Salehi Neishabouri, seyyed AliAkbar Application of Euler- Euler method in estimation of maximum depth of local scour [Volume 15, Issue 51, 2017, Pages 289-298]
Sarvghad Moghadam, Abdolreza Effect of the axial force and material strength on the seismic behavior of the short shear walls [Volume 15, Issue 48, 2017, Pages 125-137]
Sayadi, Ahmadreza Simultaneous optimization of cut-off grade and capacity of mineral processing plant [Volume 15, Issue 49, 2017, Pages 235-244]
Sayyah, Ali Developing a Mathematical Model for Determination of Asset Management Strategy Based on Maintenance and Procurement Factors [Volume 15, Issue 51, 2017, Pages 1-13]
Sazegaran, Bentolhoda Investigation of Wind Pressure on Fabric Structures with Conical Form Using CFD [Volume 15, Issue 51, 2017, Pages 181-195]
Sepehri, Mohammad Mehdi Developing a Mathematical Model for Determination of Asset Management Strategy Based on Maintenance and Procurement Factors [Volume 15, Issue 51, 2017, Pages 1-13]
Shabani, Hosein Optimal Design of Active Multiple Tuned Mass Dampers (AMTMDs) For Nonlinear Hysteretic Structures [Volume 15, Issue 48, 2017, Pages 151-163]
Shahbani-Zahiri, Amin Numerical investigation of vortices effect on the pressure drop and flow loss in a channel with planar gradual expansion [Volume 15, Issue 48, 2017, Pages 45-60]
Shahmardan, Mohammad Mohsen Numerical investigation of vortices effect on the pressure drop and flow loss in a channel with planar gradual expansion [Volume 15, Issue 48, 2017, Pages 45-60]
Sharifzadeh, Hossein Probabilistic optimal power flow to determine the Locational marginal price considering wind generation [Volume 15, Issue 48, 2017, Pages 165-182]
Sharifzadeh, Hossein Static Security Evaluation of Power Systems Considering Uncertainties Using a Point Estimation Method [Volume 15, Issue 51, 2017, Pages 359-370]
Shayanfar, Mohsenali Evaluation of steel plate shear walls based on performance based plastic design [Volume 15, Issue 51, 2017, Pages 381-396]
Sheikhzadeh, G.A. Natural convection of Al2O3-water nanofluid with variable properties in a square enclosure with heat source and heat sink on the vertical walls [Volume 15, Issue 49, 2017, Pages 1-16]
Sheikhzadeh, Ghanbar Ali A Study of Investigation and Experimental Comparison Result of the Incompressible Turbulent Flow Pressure Drop through the Multistage Industrial orifices [Volume 15, Issue 48, 2017, Pages 99-109]
Sheykh Abdollahzadeh Mamaghani, Aydin Modeling of fatigue life in double shear lap joints using artificial neural networks [Volume 15, Issue 49, 2017, Pages 55-63]
T, A The Pricing Strategy of Manufacturer for Complementary Product in the Online Selling system with Return Policy [Volume 15, Issue 50, 2017, Pages 323-334]
Taghizadeh, Hadi Modeling of fatigue life in double shear lap joints using artificial neural networks [Volume 15, Issue 49, 2017, Pages 55-63]
Tajmir Riahi, Hossein Parametric study on lateral resistance and evaluation of seismic response modification factor-R of strap-braced cold-formed steel shear walls [Volume 15, Issue 49, 2017, Pages 175-188]
Talat Ahary, Siamak The Assessment and Comparison of a Genetic Algorithm, Simulated Annealing and Cuckoo Optimization Algorithm for Optimization of the Facility Location under Competitive Conditions (Case Study: Banks) [Volume 15, Issue 48, 2017, Pages 231-246]
Taleizadeh, Ata Allah Lot sizing with defective item under warehouse limitation and construction costs [Volume 15, Issue 51, 2017, Pages 43-50]
Torabi, Keivan Exact solution for frequency equations of radial and transverse vibration of a circular plate with various boundary conditions [Volume 15, Issue 50, 2017, Pages 169-178]
V
Valizade Alavi, Shahab Anti-Hazard Wrist Strap with the capability of sensing phase to phase electrocution by using of RF transceivers modules [Volume 15, Issue 51, 2017, Pages 147-157]
Vaziri, Jalil Modeling the process of services quality increasing using QFD, AHP and Knapsack problem with fuzzy approach (A case study: police services) [Volume 15, Issue 51, 2017, Pages 67-84]
Velayati, Mohammad Hossein Prediction of operating conditions of the power system considering reactive power limits of generators and dynamic voltage stability margin by using neural network [Volume 15, Issue 51, 2017, Pages 341-350]
Yasini, Amin Modeling and Simulation Buckling Behavior of Silicon <100> and <111> Nanowires Using the Structural Mechanics Approach Method [Volume 15, Issue 50, 2017, Pages 85-93]
Yazdi Ghavidel, Zahra A Systematic Literature Review on Software Reliability Modeling [Volume 15, Issue 50, 2017, Pages 285-313]
Yousefikhoshbakht, Majid A Hybrid Modified Ant Colony for Solving the Capacitated Open Vehicle Routing Problem [Volume 15, Issue 50, 2017, Pages 179-191]
Z
Zakeri, Mahnaz Investigation of Chirality Effect on Axial and Torsional Buckling Behavior of SWCNTs Using Finite Element Method [Volume 15, Issue 48, 2017, Pages 61-71]
Zegordi, S. H. A Bi-Level Programming Model for Closed-Loop Supply Chain Network Design with Competition between two chains in Uncertain Environment: A Benders Decomposition Solution [Volume 15, Issue 49, 2017, Pages 201-215]
ZEYNALIAN, Mehran Parametric study on lateral resistance and evaluation of seismic response modification factor-R of strap-braced cold-formed steel shear walls [Volume 15, Issue 49, 2017, Pages 175-188]
Ziaei-Rad, Masoud Numerical Study of Heat Transfer and Pressure Drop in Forced-convection Nanofluid flow through an internally ribbed pipe [Volume 15, Issue 49, 2017, Pages 65-76]
