Author Index

A

  • Abbasi, Mohammad Javad A new combined method to diagnosis loss of excitation from stable power swing in doubly fed induction generator [Volume 15, Issue 51, 2017, Pages 159-169]
  • Abbasian Arani, Ali Akbar Numerical Study of fluid flow and heat transfer of mixed convection and entropy generation in a L-shaped cavity filled with nanofluid [Volume 15, Issue 50, 2017, Pages 135-147]
  • Abbasi Sooreshjani, Mehran Parametric study on lateral resistance and evaluation of seismic response modification factor-R of strap-braced cold-formed steel shear walls [Volume 15, Issue 49, 2017, Pages 175-188]
  • Abbas Nejad, Ali Simultaneously Optimization of Solar Water Heater Design Parameters Considering Consumption Patterns [Volume 15, Issue 48, 2017, Pages 111-123]
  • Abolbashari, Mohammad Hossein Performance of the Evolutionary Structural Optimization for Material with Elasto-Plastic Behavior [Volume 15, Issue 50, 2017, Pages 149-167]
  • Afzalnejad, Omid Investigation of Chirality Effect on Axial and Torsional Buckling Behavior of SWCNTs Using Finite Element Method [Volume 15, Issue 48, 2017, Pages 61-71]
  • Aghaee, Alireza Numerical Study of fluid flow and heat transfer of mixed convection and entropy generation in a L-shaped cavity filled with nanofluid [Volume 15, Issue 50, 2017, Pages 135-147]
  • Aghaee, Alireza Numerical Study of fluid flow and heat transfer of mixed convection and entropy generation in a L-shaped cavity filled with nanofluid [Volume 15, Issue 50, 2017, Pages 135-147]
  • Ahmadi, Iraj CT Saturation Detection with Calculation of Instantaneous Impedance of Magnetic Branch Using FILT [Volume 15, Issue 51, 2017, Pages 371-380]
  • Ahmadi, M. Natural convection of Al2O3-water nanofluid with variable properties in a square enclosure with heat source and heat sink on the vertical walls [Volume 15, Issue 49, 2017, Pages 1-16]
  • Ahmadi, Saman Modeling and simulation of Energy managements for fuel cell hybrid vehicle [Volume 15, Issue 50, 2017, Pages 1-16]
  • Ahmadi Danesh Ashtiyani, Fakhroddin NUMERICALLY INVESTIGATION OF THE BEHAVIOR OF LONG LINK-TO-COLUMN CONNECTIONS WITH REDUCED SECTION [Volume 15, Issue 49, 2017, Pages 151-160]
  • Ajam, Hossein Numerical and Experimental Study of Ventilation Effects on Ventilated Cavitating Flow [Volume 15, Issue 51, 2017, Pages 29-41]
  • Akbarzadeh, Pooria The effect of the blowing and suction from one or two positions over the suction surface of NACA0012 airfoil on aerodynamic performance in turbulent flow [Volume 15, Issue 51, 2017, Pages 331-340]
  • Alamatian, Javad the TMD design based on complex stiffness theory [Volume 15, Issue 51, 2017, Pages 171-180]
  • Alimirzaloo, Vali Optimization of the roll forming process of U channels using a hybrid response surface and desirability function approach [Volume 15, Issue 51, 2017, Pages 237-250]
  • Alizadeh, Adel Modeling of fatigue life in double shear lap joints using artificial neural networks [Volume 15, Issue 49, 2017, Pages 55-63]
  • Amidpour, Majid Simultaneously Optimization of Solar Water Heater Design Parameters Considering Consumption Patterns [Volume 15, Issue 48, 2017, Pages 111-123]
  • Amjady, Nima Probabilistic optimal power flow to determine the Locational marginal price considering wind generation [Volume 15, Issue 48, 2017, Pages 165-182]
  • Amjady, Nima Anti-Hazard Wrist Strap with the capability of sensing phase to phase electrocution by using of RF transceivers modules [Volume 15, Issue 51, 2017, Pages 147-157]
  • Amjady, Nima Prediction of operating conditions of the power system considering reactive power limits of generators and dynamic voltage stability margin by using neural network [Volume 15, Issue 51, 2017, Pages 341-350]
  • Amjady, Nima Static Security Evaluation of Power Systems Considering Uncertainties Using a Point Estimation Method [Volume 15, Issue 51, 2017, Pages 359-370]
  • Asadi Amiri, Sekine Provide a method for image preprocessing to improve the performance of JPEG 2000 in image compression [Volume 15, Issue 48, 2017, Pages 247-258]
  • Ashatri, payam Prediction of dynamic response of fluid in elevated water tanks using artificial neural network model [Volume 15, Issue 48, 2017, Pages 139-150]
  • Azimi, Aziz Investigate on Non-Fourier Heat Conduction in Sand Using Models based on Fractional Calculus [Volume 15, Issue 48, 2017, Pages 15-22]

B

  • Babaei, Ebrahim A New Method of Modeling for Cuk Converter Based on Signal Flow Graph Approach and its Control by using a Mixed Sensitivity Type Robust Technique [Volume 15, Issue 51, 2017, Pages 275-288]
  • Bagheri pourasil, Meysam Progressive collapse analysis methods due to blast loading in steel moment frames [Volume 15, Issue 51, 2017, Pages 51-65]
  • Bannae Sharifian, Mohammad Bagher A New Method of Modeling for Cuk Converter Based on Signal Flow Graph Approach and its Control by using a Mixed Sensitivity Type Robust Technique [Volume 15, Issue 51, 2017, Pages 275-288]
  • Baradaran Kazemzadeh, Reza Developing a Mathematical Model for Determination of Asset Management Strategy Based on Maintenance and Procurement Factors [Volume 15, Issue 51, 2017, Pages 1-13]
  • Basirat, shamsa Application of Euler- Euler method in estimation of maximum depth of local scour [Volume 15, Issue 51, 2017, Pages 289-298]
  • Bathaee, S.M.T Modeling and simulation of Energy managements for fuel cell hybrid vehicle [Volume 15, Issue 50, 2017, Pages 1-16]
  • Bayat, Reza Vibration control of laminated composite beam with magnetostrictive layers [Volume 15, Issue 48, 2017, Pages 1-13]
  • Bayati, Hassan Investigate on Non-Fourier Heat Conduction in Sand Using Models based on Fractional Calculus [Volume 15, Issue 48, 2017, Pages 15-22]
  • Beheshtinia, Mohammad Ali A Combination of Fuzzy AHP and TOPSIS Method for the Supplier Selection Problem (Case Study: Advertising Company) [Volume 15, Issue 48, 2017, Pages 217-229]
  • Beheshtinia, Mohammad Ali Modeling the process of services quality increasing using QFD, AHP and Knapsack problem with fuzzy approach (A case study: police services) [Volume 15, Issue 51, 2017, Pages 67-84]
  • Beigi-Harchegani, Maryam Numerical Study of Heat Transfer and Pressure Drop in Forced-convection Nanofluid flow through an internally ribbed pipe [Volume 15, Issue 49, 2017, Pages 65-76]
  • Beiki, Hossein Numerical investigation on effect of silica nanoparticles on the middle layer of salt gradient solar ponds [Volume 15, Issue 50, 2017, Pages 49-61]

C

  • Chaharsooghi, S. Kamal A Bi-Level Programming Model for Closed-Loop Supply Chain Network Design with Competition between two chains in Uncertain Environment: A Benders Decomposition Solution [Volume 15, Issue 49, 2017, Pages 201-215]

D

  • Dolatnejad, Azam A Hybrid Modified Ant Colony for Solving the Capacitated Open Vehicle Routing Problem [Volume 15, Issue 50, 2017, Pages 179-191]
  • Doralizadeh, Mohammad Masab Modeling and analysis of nonlinear Oscillations of atomic force microscopy in liquid environment [Volume 15, Issue 51, 2017, Pages 209-224]

E

  • Ebrahimi, Saeed Analytical solution of nonlinear rolling motion of ship using the method of multiple scales [Volume 15, Issue 49, 2017, Pages 125-137]
  • Ebrahimikhosroshahi, Mohammadreza Optimization of the roll forming process of U channels using a hybrid response surface and desirability function approach [Volume 15, Issue 51, 2017, Pages 237-250]
  • Eskandari, Hamidreza A Bi-Level Programming Model for Closed-Loop Supply Chain Network Design with Competition between two chains in Uncertain Environment: A Benders Decomposition Solution [Volume 15, Issue 49, 2017, Pages 201-215]
  • Eskandari, Hamidreza Developing a Mathematical Model for Determination of Asset Management Strategy Based on Maintenance and Procurement Factors [Volume 15, Issue 51, 2017, Pages 1-13]
  • Ezani, Javad DEVELOPMENT OF A DYNAMIC MODEL FOR SIMULATION OF REAL-TIME TRANSIENT TURBOJET ENGINE PERFORMANCE IN SIMULINK [Volume 15, Issue 50, 2017, Pages 95-108]

F

  • Fallah, Hamed A Bi-Level Programming Model for Closed-Loop Supply Chain Network Design with Competition between two chains in Uncertain Environment: A Benders Decomposition Solution [Volume 15, Issue 49, 2017, Pages 201-215]
  • Fallahi, Alireza CT Saturation Detection with Calculation of Instantaneous Impedance of Magnetic Branch Using FILT [Volume 15, Issue 51, 2017, Pages 371-380]
  • Farahat, Said Numerical and Experimental Study of Ventilation Effects on Ventilated Cavitating Flow [Volume 15, Issue 51, 2017, Pages 29-41]
  • Faraji, Mohammad DEVELOPMENT OF A DYNAMIC MODEL FOR SIMULATION OF REAL-TIME TRANSIENT TURBOJET ENGINE PERFORMANCE IN SIMULINK [Volume 15, Issue 50, 2017, Pages 95-108]
  • Farzam, Masood Effect of the axial force and material strength on the seismic behavior of the short shear walls [Volume 15, Issue 48, 2017, Pages 125-137]
  • Fathi, Mojtaba Finite elements analysis of a New Moment-Resistant Connection in Precast Concrete Frames under cyclic loading [Volume 15, Issue 49, 2017, Pages 189-200]
  • Fekri, Roxana Modelling uncertainty in performance appraisal process based on evidence theory and fuzzy theory [Volume 15, Issue 51, 2017, Pages 411-432]
  • Freidoonimehr, navid Entropy Generation Analysis for an MHD Slip Nano-Fluid Flow over a Stretching Permeable Surface [Volume 15, Issue 49, 2017, Pages 39-53]
  • Freidoonimehr, Navid Parametric analysis and optimization of the supercritical ejector refrigeration cycle with different working fluids using Artificial neural network and particle swarm optimization algorithm [Volume 15, Issue 50, 2017, Pages 121-133]

G

  • GH, M Static Security Evaluation of Power Systems Considering Uncertainties Using a Point Estimation Method [Volume 15, Issue 51, 2017, Pages 359-370]
  • Ghaderi, Reza Investigation of Nonlinear Vibration Behavior of Piezoelectric Micro-Beam Interacting with Spherical Nano Particles [Volume 15, Issue 48, 2017, Pages 85-98]
  • Ghahfarokhi, Zahra Numerical Study of fluid flow and heat transfer of mixed convection and entropy generation in a L-shaped cavity filled with nanofluid [Volume 15, Issue 50, 2017, Pages 135-147]
  • Ghanizadeh, Mohammad Effect of the axial force and material strength on the seismic behavior of the short shear walls [Volume 15, Issue 48, 2017, Pages 125-137]
  • Gholami, Shahab Investigate on Non-Fourier Heat Conduction in Sand Using Models based on Fractional Calculus [Volume 15, Issue 48, 2017, Pages 15-22]
  • Gholami fard, Milad Probabilistic optimal power flow to determine the Locational marginal price considering wind generation [Volume 15, Issue 48, 2017, Pages 165-182]
  • Gholizad, Amin Progressive collapse analysis methods due to blast loading in steel moment frames [Volume 15, Issue 51, 2017, Pages 51-65]
  • Gohrrokhi, Ali Evaluation of steel plate shear walls based on performance based plastic design [Volume 15, Issue 51, 2017, Pages 381-396]

H

  • Haghani, Amad Investigation of Nonlinear Vibration Behavior of Piezoelectric Micro-Beam Interacting with Spherical Nano Particles [Volume 15, Issue 48, 2017, Pages 85-98]
  • Haji Aboutalebi, Farhad Numerical Simulation of Machining Processes by Using Hooputra's Shear Damage Criterion [Volume 15, Issue 49, 2017, Pages 101-109]
  • Hajikazemi, Hassan Application of FRP Material in Buckling Restrained Braces. [Volume 15, Issue 50, 2017, Pages 225-236]
  • Haji Kazemi, Hassan Investigation of Wind Pressure on Fabric Structures with Conical Form Using CFD [Volume 15, Issue 51, 2017, Pages 181-195]
  • Hakim pour, Farshad The Assessment and Comparison of a Genetic Algorithm, Simulated Annealing and Cuckoo Optimization Algorithm for Optimization of the Facility Location under Competitive Conditions (Case Study: Banks) [Volume 15, Issue 48, 2017, Pages 231-246]
  • Harimi, Ali improving speech emotion recognition via gender classification [Volume 15, Issue 48, 2017, Pages 183-200]
  • Hasani, Aliakbar Two Stage Stochastic Programing Based on the Sample Average Approximation and Accelerated Benders Decomposition for Designing Closed-loop Supply Chain Network Design under Uncertainty [Volume 15, Issue 49, 2017, Pages 217-234]
  • Hasani, Ali akbar A Hybrid Metaheuristic Algorithm for Robust Two-stage Flexible Flow Shop scheduling with Dedicated Assembly Lines under Uncertainty [Volume 15, Issue 50, 2017, Pages 25-47]
  • Hashemi Majd, Mahsa A Systematic Literature Review on Software Reliability Modeling [Volume 15, Issue 50, 2017, Pages 285-313]
  • Hassani, reza Finite elements analysis of a New Moment-Resistant Connection in Precast Concrete Frames under cyclic loading [Volume 15, Issue 49, 2017, Pages 189-200]
  • Heidari-Rarani, Mohammad Exact solution for frequency equations of radial and transverse vibration of a circular plate with various boundary conditions [Volume 15, Issue 50, 2017, Pages 169-178]
  • Heydari, Jafar A mathematical model for coordinating corporate social responsibility and order quantity in pharmaceutical supply chain [Volume 15, Issue 50, 2017, Pages 245-260]
  • Hoseini Vaez, Seyed Rohollah Estimating Maximum Rotation of Beam of R.C. Moment‐resisting Frames Using Equivalent Pulses of Near-fault Motions [Volume 15, Issue 50, 2017, Pages 193-210]
  • Hosseini-Chaleshtori, Shahram Exact solution for frequency equations of radial and transverse vibration of a circular plate with various boundary conditions [Volume 15, Issue 50, 2017, Pages 169-178]
  • Hosseini-Motlagh, Seyyed-Mahdi A mathematical model for coordinating corporate social responsibility and order quantity in pharmaceutical supply chain [Volume 15, Issue 50, 2017, Pages 245-260]
  • Hossein Nezhad, Alireza Numerical and Experimental Study of Ventilation Effects on Ventilated Cavitating Flow [Volume 15, Issue 51, 2017, Pages 29-41]

J

  • Jahan Abadi, Mojtabaa Estimating Maximum Rotation of Beam of R.C. Moment‐resisting Frames Using Equivalent Pulses of Near-fault Motions [Volume 15, Issue 50, 2017, Pages 193-210]
  • Jahangiri, Mehdi Investigation of Nonlinear Vibration Behavior of Piezoelectric Micro-Beam Interacting with Spherical Nano Particles [Volume 15, Issue 48, 2017, Pages 85-98]
  • Jahangoshai Rezaee, Mustafa An integrated model for selecting efficient suppliers in a competitive environment under uncertain demand [Volume 15, Issue 51, 2017, Pages 299-317]
  • Jahromi, Mehdi DEVELOPMENT OF A DYNAMIC MODEL FOR SIMULATION OF REAL-TIME TRANSIENT TURBOJET ENGINE PERFORMANCE IN SIMULINK [Volume 15, Issue 50, 2017, Pages 95-108]
  • Jalili, Mohammad Mahdi Analytical solution of nonlinear rolling motion of ship using the method of multiple scales [Volume 15, Issue 49, 2017, Pages 125-137]
  • Javadpour, Seyed Morteza Numerical and Experimental Study of Ventilation Effects on Ventilated Cavitating Flow [Volume 15, Issue 51, 2017, Pages 29-41]

K

  • Keramati, Abbas Modelling uncertainty in performance appraisal process based on evidence theory and fuzzy theory [Volume 15, Issue 51, 2017, Pages 411-432]
  • Keshtegar, Behrooz FIRST OREDR RELIABILITY METHOD OF STRACTURS USINGA IMPRVED HARMONY SEARCH OPTIMIZATION [Volume 15, Issue 51, 2017, Pages 15-27]
  • Khajevandi, Issa Prediction of operating conditions of the power system considering reactive power limits of generators and dynamic voltage stability margin by using neural network [Volume 15, Issue 51, 2017, Pages 341-350]
  • Khajooei-Gharaei, Masoomeh Performance of the Evolutionary Structural Optimization for Material with Elasto-Plastic Behavior [Volume 15, Issue 50, 2017, Pages 149-167]
  • Khodayari, Aliasghar Simultaneous optimization of cut-off grade and capacity of mineral processing plant [Volume 15, Issue 49, 2017, Pages 235-244]
  • Khorram, Esmaile A Hybrid Modified Ant Colony for Solving the Capacitated Open Vehicle Routing Problem [Volume 15, Issue 50, 2017, Pages 179-191]

M

  • Mahmoodi, Masoud Prediction of Mechanical Properties of Equal Channel Angular Rolled Al6061 Alloy Sheet Using Artificial Neural Networks and Nonlinear Regression [Volume 15, Issue 51, 2017, Pages 197-207]
  • Modanloo, Vahid Optimization of the roll forming process of U channels using a hybrid response surface and desirability function approach [Volume 15, Issue 51, 2017, Pages 237-250]
  • Mohagheghian, shahriar Numerical Simulation of Machining Processes by Using Hooputra's Shear Damage Criterion [Volume 15, Issue 49, 2017, Pages 101-109]
  • Mohammadi, Yaghoub Progressive collapse analysis methods due to blast loading in steel moment frames [Volume 15, Issue 51, 2017, Pages 51-65]
  • Mohammadian, Leila A New Method of Modeling for Cuk Converter Based on Signal Flow Graph Approach and its Control by using a Mixed Sensitivity Type Robust Technique [Volume 15, Issue 51, 2017, Pages 275-288]
  • Mohebbi, Mohtasham Optimal Design of Active Multiple Tuned Mass Dampers (AMTMDs) For Nonlinear Hysteretic Structures [Volume 15, Issue 48, 2017, Pages 151-163]
  • Mohebzadeh, Ahmad Design and Modeling of Biosensor Based on Photonic Crystal Nano Resonator [Volume 15, Issue 51, 2017, Pages 351-358]
  • Mokhtari, Hadi Modeling and Solution of Job Shop Scheduling with No-Wait Orders to Minimize Makespan: A Decomposition Approach based on Order Sequencing and Timetabling [Volume 15, Issue 50, 2017, Pages 261-270]
  • Moradi bastani, Majid A Study of Investigation and Experimental Comparison Result of the Incompressible Turbulent Flow Pressure Drop through the Multistage Industrial orifices [Volume 15, Issue 48, 2017, Pages 99-109]
  • Mostafavi, Mahsa The effect of the blowing and suction from one or two positions over the suction surface of NACA0012 airfoil on aerodynamic performance in turbulent flow [Volume 15, Issue 51, 2017, Pages 331-340]
  • Motaghedi Barforoush, Mohammad Sadegh Numerical Investigation of Convection and Radiation Heat Loss Reduction between Two Finite Concentric Cylinders Using Radiation Shields [Volume 15, Issue 50, 2017, Pages 63-74]
  • Motaghedi Barforoush, Mohammad Sadegh Convection and Radiation Heat Loss Reduction between Two Finite Concentric Cylinders Using Radiation Shields at Different Pressure: Experimental Study [Volume 15, Issue 50, 2017, Pages 75-84]

N

  • N, A Modeling of index-guiding photonic crystal fiber with low-chromatic dispersion and low-nonlinearity effect [Volume 15, Issue 50, 2017, Pages 17-24]
  • Naderi Bakhtiari, Ali Prediction of Mechanical Properties of Equal Channel Angular Rolled Al6061 Alloy Sheet Using Artificial Neural Networks and Nonlinear Regression [Volume 15, Issue 51, 2017, Pages 197-207]
  • Nahid Titkanlu, Hossein Modelling uncertainty in performance appraisal process based on evidence theory and fuzzy theory [Volume 15, Issue 51, 2017, Pages 411-432]
  • Navid Chakherlou, Tajbakh Modeling of fatigue life in double shear lap joints using artificial neural networks [Volume 15, Issue 49, 2017, Pages 55-63]
  • Nazari, Foad Parametric analysis and optimization of the supercritical ejector refrigeration cycle with different working fluids using Artificial neural network and particle swarm optimization algorithm [Volume 15, Issue 50, 2017, Pages 121-133]
  • Nemati-Abozar, Vahid A Combination of Fuzzy AHP and TOPSIS Method for the Supplier Selection Problem (Case Study: Advertising Company) [Volume 15, Issue 48, 2017, Pages 217-229]
  • Nematollahi, Mohammadreza A mathematical model for coordinating corporate social responsibility and order quantity in pharmaceutical supply chain [Volume 15, Issue 50, 2017, Pages 245-260]
  • Nobil, Amir Hossein Lot sizing with defective item under warehouse limitation and construction costs [Volume 15, Issue 51, 2017, Pages 43-50]
  • Norouzi, Mahmod Numerical investigation of vortices effect on the pressure drop and flow loss in a channel with planar gradual expansion [Volume 15, Issue 48, 2017, Pages 45-60]

O

  • Olyaee, Saeed Design and Modeling of Biosensor Based on Photonic Crystal Nano Resonator [Volume 15, Issue 51, 2017, Pages 351-358]

P

  • Pirkandi, Jamasb DEVELOPMENT OF A DYNAMIC MODEL FOR SIMULATION OF REAL-TIME TRANSIENT TURBOJET ENGINE PERFORMANCE IN SIMULINK [Volume 15, Issue 50, 2017, Pages 95-108]

R

  • Rahmani, Morteza Multi objective Model of airport gate scheduling problem using NSGA-II algorithm and epsilon constraint [Volume 15, Issue 51, 2017, Pages 397-410]
  • Rahmani, Omid Vibration control of laminated composite beam with magnetostrictive layers [Volume 15, Issue 48, 2017, Pages 1-13]
  • Rahmat, Neda Analytical solution of nonlinear rolling motion of ship using the method of multiple scales [Volume 15, Issue 49, 2017, Pages 125-137]
  • Raissi Dehkordi, Alireza Evaluation of steel plate shear walls based on performance based plastic design [Volume 15, Issue 51, 2017, Pages 381-396]
  • Rajabi Khanghahi, Abbas Simultaneously Optimization of Solar Water Heater Design Parameters Considering Consumption Patterns [Volume 15, Issue 48, 2017, Pages 111-123]
  • Rajabi Zargarabadi, Mehran Film cooling effectiveness enhancement of rotating turbine blade using Shaped holes [Volume 15, Issue 51, 2017, Pages 225-236]
  • Rakhshani Mehr, Mehrallah Seismic risk analysis and mapping acceleration Nishapur city [Volume 15, Issue 50, 2017, Pages 211-223]
  • Ramezani, Nabiollah CT Saturation Detection with Calculation of Instantaneous Impedance of Magnetic Branch Using FILT [Volume 15, Issue 51, 2017, Pages 371-380]
  • Ranjbar, Abolfazl The Assessment and Comparison of a Genetic Algorithm, Simulated Annealing and Cuckoo Optimization Algorithm for Optimization of the Facility Location under Competitive Conditions (Case Study: Banks) [Volume 15, Issue 48, 2017, Pages 231-246]
  • Rasoolzadegan, Abbas A Systematic Literature Review on Software Reliability Modeling [Volume 15, Issue 50, 2017, Pages 285-313]
  • Razzazi, Mohhamdreza A Novel Model for Software Services Development Effort Estimation [Volume 15, Issue 49, 2017, Pages 245-261]
  • Rezaee, M. Natural convection of Al2O3-water nanofluid with variable properties in a square enclosure with heat source and heat sink on the vertical walls [Volume 15, Issue 49, 2017, Pages 1-16]
  • Rezaeian, Alireza Evaluation of steel plate shear walls based on performance based plastic design [Volume 15, Issue 51, 2017, Pages 381-396]
  • Rikhtegare Giasi, amir Robustness of Magnetic Levitation by Using Feedback Linearization Back-Stepping and Nonlinear Disturbance Observer [Volume 15, Issue 49, 2017, Pages 29-38]
  • Rouhparvar, Mohammadreza Application of FRP Material in Buckling Restrained Braces. [Volume 15, Issue 50, 2017, Pages 225-236]

S

  • S, A Numerical investigation on effect of silica nanoparticles on the middle layer of salt gradient solar ponds [Volume 15, Issue 50, 2017, Pages 49-61]
  • S, M Modeling of index-guiding photonic crystal fiber with low-chromatic dispersion and low-nonlinearity effect [Volume 15, Issue 50, 2017, Pages 17-24]
  • Saadatjoo, Fatemeh Performance Evaluation of WW and WD Concurrency Control Algorithms for Database Management, via Modeling by Colored Petri Net [Volume 15, Issue 51, 2017, Pages 99-111]
  • Saadatjoo, Mohammad Ali Performance Evaluation of WW and WD Concurrency Control Algorithms for Database Management, via Modeling by Colored Petri Net [Volume 15, Issue 51, 2017, Pages 99-111]
  • Saedodin, Seyfolah Numerical Investigation of Convection and Radiation Heat Loss Reduction between Two Finite Concentric Cylinders Using Radiation Shields [Volume 15, Issue 50, 2017, Pages 63-74]
  • Saedodin, Seyfolah Convection and Radiation Heat Loss Reduction between Two Finite Concentric Cylinders Using Radiation Shields at Different Pressure: Experimental Study [Volume 15, Issue 50, 2017, Pages 75-84]
  • Saffariyan, Farzam Simultaneous optimization of cut-off grade and capacity of mineral processing plant [Volume 15, Issue 49, 2017, Pages 235-244]
  • Salari, Mahmoud Numerical and Experimental Study of Ventilation Effects on Ventilated Cavitating Flow [Volume 15, Issue 51, 2017, Pages 29-41]
  • Salehi Neishabouri, seyyed AliAkbar Application of Euler- Euler method in estimation of maximum depth of local scour [Volume 15, Issue 51, 2017, Pages 289-298]
  • Sarvghad Moghadam, Abdolreza Effect of the axial force and material strength on the seismic behavior of the short shear walls [Volume 15, Issue 48, 2017, Pages 125-137]
  • Sayadi, Ahmadreza Simultaneous optimization of cut-off grade and capacity of mineral processing plant [Volume 15, Issue 49, 2017, Pages 235-244]
  • Sayyah, Ali Developing a Mathematical Model for Determination of Asset Management Strategy Based on Maintenance and Procurement Factors [Volume 15, Issue 51, 2017, Pages 1-13]
  • Sazegaran, Bentolhoda Investigation of Wind Pressure on Fabric Structures with Conical Form Using CFD [Volume 15, Issue 51, 2017, Pages 181-195]
  • Sepehri, Mohammad Mehdi Developing a Mathematical Model for Determination of Asset Management Strategy Based on Maintenance and Procurement Factors [Volume 15, Issue 51, 2017, Pages 1-13]
  • Shabani, Hosein Optimal Design of Active Multiple Tuned Mass Dampers (AMTMDs) For Nonlinear Hysteretic Structures [Volume 15, Issue 48, 2017, Pages 151-163]
  • Shahbani-Zahiri, Amin Numerical investigation of vortices effect on the pressure drop and flow loss in a channel with planar gradual expansion [Volume 15, Issue 48, 2017, Pages 45-60]
  • Shahmardan, Mohammad Mohsen Numerical investigation of vortices effect on the pressure drop and flow loss in a channel with planar gradual expansion [Volume 15, Issue 48, 2017, Pages 45-60]
  • Shakeri, Saleh Micro-milling self-excited vibrations reduction using vibration absorbers [Volume 15, Issue 50, 2017, Pages 109-120]
  • Sharifzadeh, Hossein Probabilistic optimal power flow to determine the Locational marginal price considering wind generation [Volume 15, Issue 48, 2017, Pages 165-182]
  • Sharifzadeh, Hossein Static Security Evaluation of Power Systems Considering Uncertainties Using a Point Estimation Method [Volume 15, Issue 51, 2017, Pages 359-370]
  • Shayanfar, Mohsenali Evaluation of steel plate shear walls based on performance based plastic design [Volume 15, Issue 51, 2017, Pages 381-396]
  • Sheikhzadeh, G.A. Natural convection of Al2O3-water nanofluid with variable properties in a square enclosure with heat source and heat sink on the vertical walls [Volume 15, Issue 49, 2017, Pages 1-16]
  • Sheikhzadeh, Ghanbar Ali A Study of Investigation and Experimental Comparison Result of the Incompressible Turbulent Flow Pressure Drop through the Multistage Industrial orifices [Volume 15, Issue 48, 2017, Pages 99-109]
  • Sheykh Abdollahzadeh Mamaghani, Aydin Modeling of fatigue life in double shear lap joints using artificial neural networks [Volume 15, Issue 49, 2017, Pages 55-63]
  • Sheykh Samani, Farhad Micro-milling self-excited vibrations reduction using vibration absorbers [Volume 15, Issue 50, 2017, Pages 109-120]

T

  • T, A The Pricing Strategy of Manufacturer for Complementary Product in the Online Selling system with Return Policy [Volume 15, Issue 50, 2017, Pages 323-334]
  • Taghizadeh, Hadi Modeling of fatigue life in double shear lap joints using artificial neural networks [Volume 15, Issue 49, 2017, Pages 55-63]
  • Tajmir Riahi, Hossein Parametric study on lateral resistance and evaluation of seismic response modification factor-R of strap-braced cold-formed steel shear walls [Volume 15, Issue 49, 2017, Pages 175-188]
  • Talat Ahary, Siamak The Assessment and Comparison of a Genetic Algorithm, Simulated Annealing and Cuckoo Optimization Algorithm for Optimization of the Facility Location under Competitive Conditions (Case Study: Banks) [Volume 15, Issue 48, 2017, Pages 231-246]
  • Taleizadeh, Ata Allah Lot sizing with defective item under warehouse limitation and construction costs [Volume 15, Issue 51, 2017, Pages 43-50]
  • Torabi, Keivan Exact solution for frequency equations of radial and transverse vibration of a circular plate with various boundary conditions [Volume 15, Issue 50, 2017, Pages 169-178]

V

  • Valizade Alavi, Shahab Anti-Hazard Wrist Strap with the capability of sensing phase to phase electrocution by using of RF transceivers modules [Volume 15, Issue 51, 2017, Pages 147-157]
  • Vaziri, Jalil Modeling the process of services quality increasing using QFD, AHP and Knapsack problem with fuzzy approach (A case study: police services) [Volume 15, Issue 51, 2017, Pages 67-84]
  • Velayati, Mohammad Hossein Prediction of operating conditions of the power system considering reactive power limits of generators and dynamic voltage stability margin by using neural network [Volume 15, Issue 51, 2017, Pages 341-350]

Y

  • Yaghmaie, Khashayar improving speech emotion recognition via gender classification [Volume 15, Issue 48, 2017, Pages 183-200]
  • Yasini, Amin Modeling and Simulation Buckling Behavior of Silicon <100> and <111> Nanowires Using the Structural Mechanics Approach Method [Volume 15, Issue 50, 2017, Pages 85-93]
  • Yazdi Ghavidel, Zahra A Systematic Literature Review on Software Reliability Modeling [Volume 15, Issue 50, 2017, Pages 285-313]
  • Yousefikhoshbakht, Majid A Hybrid Modified Ant Colony for Solving the Capacitated Open Vehicle Routing Problem [Volume 15, Issue 50, 2017, Pages 179-191]

Z

  • Zakeri, Mahnaz Investigation of Chirality Effect on Axial and Torsional Buckling Behavior of SWCNTs Using Finite Element Method [Volume 15, Issue 48, 2017, Pages 61-71]
  • Zegordi, S. H. A Bi-Level Programming Model for Closed-Loop Supply Chain Network Design with Competition between two chains in Uncertain Environment: A Benders Decomposition Solution [Volume 15, Issue 49, 2017, Pages 201-215]
  • ZEYNALIAN, Mehran Parametric study on lateral resistance and evaluation of seismic response modification factor-R of strap-braced cold-formed steel shear walls [Volume 15, Issue 49, 2017, Pages 175-188]
  • Ziaei-Rad, Masoud Numerical Study of Heat Transfer and Pressure Drop in Forced-convection Nanofluid flow through an internally ribbed pipe [Volume 15, Issue 49, 2017, Pages 65-76]