Author Index

A

  • Abbasi, Abdollah Designing L1 Adaptive Control for stabilizing Chaotic Systems with Uncertainty in the model [Volume 16, Issue 52, 2018, Pages 171-181]
  • Abdi Tahneh, Behrooz A new tunneling carbon nanotube field effect transistor with linear doping profile at drain region: numerical simulation study [Volume 16, Issue 52, 2018, Pages 109-117]
  • Abdzadeh, Behnam Multi-objective optimization of average travel time for a metro line by considering both location and dispersion effects [Volume 16, Issue 52, 2018, Pages 331-345]
  • Afrand, Masoud Artificial neural network modeling for prediction of thermal conductivity of functionalized MWCNTs/water nanofluids and a new empirical correlation [Volume 16, Issue 53, 2018, Pages 67-73]
  • Aghaei, Jamshid Coordination of Wind Power Plants and Energy Storage Devices in Security-Constrained Unit Commitment Problem Using Robust Optimization [Volume 16, Issue 53, 2018, Pages 207-220]
  • Aghebati, Behnam Effect of pitting corrosion on the load-carrying capacity of plate elements subjected to axial compression [Volume 16, Issue 55, 2018, Pages 221-234]
  • Ahmadi, Masoud Effects of beech and eucalyptus sawdust as a supplementary material to improve the performance of composite panel [Volume 16, Issue 53, 2018, Pages 259-267]
  • Ahmadi, Nima Numerical investigation of counter flow polymer exchange membrane fuel cell with two channel [Volume 16, Issue 53, 2018, Pages 39-51]
  • Ahmadian Ramaki, Ali A Systematic Review of Intrusion Detection using Hidden Markov Models: Approaches, Applications, and Challenges [Volume 16, Issue 53, 2018, Pages 183-206]
  • Ahmadnejad Zarnaghi, Amir Damage Localization in Plate-Like Structures Using Wavelet Energy Analysis [Volume 16, Issue 53, 2018, Pages 299-313]
  • Akbari Zadeh, Mohammad Modeling of VLE and LLE Systems by using Thermodynamic model with ANFIS Structures and GMDH Type-Neural Network [Volume 16, Issue 55, 2018, Pages 19-33]
  • Akbarpour, Abolfazl Modeling the interaction of water resources and value added in the Birjand Plain [Volume 16, Issue 55, 2018, Pages 279-298]
  • Alavi Nia, Ali Experimental and numerical investigation of hole and edge radius effect on collapse properties of cylindrical absorbers under axial impact loading [Volume 16, Issue 53, 2018, Pages 53-65]
  • Alibeyki, Davoud Thermo-hydro-dynamic investigation of journal bearing by a two dimensional model [Volume 16, Issue 53, 2018, Pages 101-112]
  • Alidoost Abadikhah, Farzam Seismic Risk Assessment of Hamedan City [Volume 16, Issue 55, 2018, Pages 247-266]
  • Alipour, Aref Application of response surface method to the prediction of TBM penetration rate [Volume 16, Issue 55, 2018, Pages 299-310]
  • Alizadeh, Yunes On the mechanical properties of polyvinyl pyrrolidone reinforced by single-walled carbon nanotubes using molecular dynamics simulations and finite element modeling [Volume 16, Issue 52, 2018, Pages 373-381]
  • Ameli, Mohammad Taghi Local and Remote Voltage and Reactive Power Control in the Presence of Induction Generators [Volume 16, Issue 52, 2018, Pages 83-96]
  • Ameli Kalkhoran, Seyed Nader Study of the Effective Parameters in Laser Forming of Steel Sheets [Volume 16, Issue 52, 2018, Pages 41-52]
  • Amid Khatibi Bardsiri, Amid A Novel Hybrid Model to Increase the Accuracy of Case Based Reasoning Method in Software Development Effort Estimation [Volume 16, Issue 54, 2018, Pages 39-52]
  • Ansari, Reza On the mechanical properties of polyvinyl pyrrolidone reinforced by single-walled carbon nanotubes using molecular dynamics simulations and finite element modeling [Volume 16, Issue 52, 2018, Pages 373-381]
  • Asadi Gangraj, Ebrahim Developing metaheuristic approaches to solve flow shop scheduling problem with worker assignment [Volume 16, Issue 54, 2018, Pages 283-293]
  • Asgari, Mohsen Optimal Dynamic Manipulation Workspace of a Single Link Robot Manipulator [Volume 16, Issue 54, 2018, Pages 429-441]
  • Asghari, Morteza Numerical simulation and theoretical study on effects of operating parameters in Persian Gulf desalination using vacuum membrane distillation [Volume 16, Issue 55, 2018, Pages 41-49]
  • Asyaei, Mohammad Low-Power Register File Design in 90nm CMOS Technology [Volume 16, Issue 54, 2018, Pages 69-81]
  • Azadi, Saeed Predicting the Groundwater Salinity under Drain Pipes Using Artificial Neural Network [Volume 16, Issue 52, 2018, Pages 203-211]
  • Azadian, Meysam Modeling of VLE and LLE Systems by using Thermodynamic model with ANFIS Structures and GMDH Type-Neural Network [Volume 16, Issue 55, 2018, Pages 19-33]
  • Azimian, AhmadReza Numerical simulation of convective heat transfer in a turbulant non-Newtonian nanofluid flow through a horizontal circular tube [Volume 16, Issue 53, 2018, Pages 113-120]

B

  • Babaei, Mehdi Multi-Objective Optimization of Reinforced Concrete Frames using Genetic Algorithm and Weighted Sum Method [Volume 16, Issue 52, 2018, Pages 193-201]
  • Babaei, Mohsen Experimental study and empirical modeling of lithium ion battery lifetime [Volume 16, Issue 55, 2018, Pages 35-40]
  • Badamchizadeh, Parastoo Modeling the size of hydrophilic nanoparticles during fluidization with emphasis on the role of vapor of polar materials [Volume 16, Issue 52, 2018, Pages 383-395]
  • Baghayipour, Mohammadreza An Experimental Model for Extraction of the Natural Frequencies influencing on the Acoustic Noise of Synchronous Motors [Volume 16, Issue 53, 2018, Pages 231-242]
  • Bagheri, Ali Modeling the interaction of water resources and value added in the Birjand Plain [Volume 16, Issue 55, 2018, Pages 279-298]
  • Baseri, Hadi Experimental investigation and numerical modeling of carbon dioxide desorption from activated carbon vessel by using of finite elements method [Volume 16, Issue 52, 2018, Pages 363-371]
  • Basirat, Ruhollah Numerical Analysis of the Segmental Supporting System Under Earthquake Loading [Volume 16, Issue 54, 2018, Pages 177-187]
  • Batalebluie, reza Study of The effect of thickness and initial geometric imperfection of cylindrical composite shell on the buckling behavior in axial pressure [Volume 16, Issue 53, 2018, Pages 121-134]
  • Batalebluie, reza Numerical and Experimental Study of Reinforced Composite Vessels with Hoop Stiffeners under External Hydrostatic Pressure [Volume 16, Issue 54, 2018, Pages 339-349]
  • Beheshtinia, Mohammad Ali Presenting a model for production and transportation scheduling in automotive industry (a case study: Iran Khodro) [Volume 16, Issue 52, 2018, Pages 299-309]
  • Behnam rad, Golsa Subset Simulation Method in Active Structural Control [Volume 16, Issue 53, 2018, Pages 279-288]
  • Behrooz sarand, Alireza Performance modeling of nano structure graphene membrane for hydrogen separation using CFD methods [Volume 16, Issue 55, 2018, Pages 77-86]
  • Beiki, Hossein CFD Investigation on Nanofluids Convective Heat Transfer in a Duct Containing Spherical Surfaces [Volume 16, Issue 52, 2018, Pages 347-361]
  • Borhani, Ehsan Manufacturing and analysis of dynamic and mechanical properties of rigid nanocomposite polyurethane foam reinforced by nano particles of SiC [Volume 16, Issue 53, 2018, Pages 1-7]
  • Bozorgnezhad, Fatemeh Developing metaheuristic approaches to solve flow shop scheduling problem with worker assignment [Volume 16, Issue 54, 2018, Pages 283-293]

C

  • Chahardoli, Saber Experimental and numerical investigation of hole and edge radius effect on collapse properties of cylindrical absorbers under axial impact loading [Volume 16, Issue 53, 2018, Pages 53-65]
  • Chaharsooghi, Kamal Integration of physical and financial decisions in value-based supply chain [Volume 16, Issue 54, 2018, Pages 227-239]

D

  • D, A Numerical investigation of counter flow polymer exchange membrane fuel cell with two channel [Volume 16, Issue 53, 2018, Pages 39-51]
  • Daeijavad, Shohre Modeling and evaluation of Massey Ferguson tractor seat using finite element method [Volume 16, Issue 53, 2018, Pages 269-278]
  • Daghbandan, allahyar Modeling of VLE and LLE Systems by using Thermodynamic model with ANFIS Structures and GMDH Type-Neural Network [Volume 16, Issue 55, 2018, Pages 19-33]
  • Daneshpour, Negin An Improved two-layer Model in the Logical Level Data Warehouse Designing [Volume 16, Issue 54, 2018, Pages 21-37]
  • Daneshpour, Negin View Maintenance Expression Improvement in Data Warehouses [Volume 16, Issue 55, 2018, Pages 101-111]
  • Darabi, Ahmad An Experimental Model for Extraction of the Natural Frequencies influencing on the Acoustic Noise of Synchronous Motors [Volume 16, Issue 53, 2018, Pages 231-242]
  • Darvishi, Parviz A three-dimensional model for evaluating the performance of proton exchange membrane fuel cell to reduce the waste of hydrogen [Volume 16, Issue 55, 2018, Pages 51-61]
  • Dastfan, Ali An Experimental Model for Extraction of the Natural Frequencies influencing on the Acoustic Noise of Synchronous Motors [Volume 16, Issue 53, 2018, Pages 231-242]
  • Dehestani, Pouya Study of The effect of thickness and initial geometric imperfection of cylindrical composite shell on the buckling behavior in axial pressure [Volume 16, Issue 53, 2018, Pages 121-134]
  • Dehghan, Maziar Porous-filled helical double-pipe heat exchanger under asymmetric heat flux [Volume 16, Issue 52, 2018, Pages 409-418]
  • Dideban, Abbas A novel control strategy for solar-wind hybrid energy systems based on optimal battery charge and discharge limits in various time domain [Volume 16, Issue 55, 2018, Pages 163-173]

E

  • Ebadi jamkhaneh, Mahdi Effects of beech and eucalyptus sawdust as a supplementary material to improve the performance of composite panel [Volume 16, Issue 53, 2018, Pages 259-267]
  • Ebrahimi, Alireza A novel control strategy for solar-wind hybrid energy systems based on optimal battery charge and discharge limits in various time domain [Volume 16, Issue 55, 2018, Pages 163-173]
  • Ebrahimi Mamaghani, Ali Lateral vibration control of a beam subjected to the harmonic external load using a nonlinear energy sink [Volume 16, Issue 55, 2018, Pages 375-390]
  • Emadi, Sima Process-oriented integration in industrial information systems [Volume 16, Issue 53, 2018, Pages 363-378]
  • Emamgholi, Manoochehr Generating Random Samples Using Response Surface Methodology without need to Distribution of Parameters [Volume 16, Issue 54, 2018, Pages 139-152]
  • Eskandari, Hamid Finite Element and Experimental Analysis of Bond Behavior Between Reinforcement and Concrete Containing Fibers, Silicafume and Nanosilica [Volume 16, Issue 54, 2018, Pages 153-166]
  • Esmaili, Masoud Integrated control scheme for induction generator, fault current limiter, and energy storage in wind farms [Volume 16, Issue 55, 2018, Pages 87-100]

F

  • Fallah, Seyed Hossein A Mathematical modeling and optimization of solar chimney power plant by SA and PSO algorithm [Volume 16, Issue 53, 2018, Pages 75-87]
  • Farashi, Zahra Optimal Dynamic Manipulation Workspace of a Single Link Robot Manipulator [Volume 16, Issue 54, 2018, Pages 429-441]
  • Farsi, Mohammadreza Design and Simulation of Second Order Sigma-Delta Modulator with Very High Precision and Low Power Consumption for Medical Applications [Volume 16, Issue 55, 2018, Pages 191-197]
  • Farzi, Ali Modeling and Simulation of Catalytic Direct Partial Oxidation of Methane to Methanol in a Fluidized-Bed Reactor [Volume 16, Issue 52, 2018, Pages 397-407]
  • Fathollahi, Sobhan Exergy analysis of a direct-expansion solar-assisted heat pump system considering the effects of pressure drop of the R134a refrigerant flow [Volume 16, Issue 52, 2018, Pages 53-66]
  • Ferdosi, Saeedeh Simulation and Implementation of Obstacle Avoidance and Synchronization Tasks using Probabilistic and Timed Supervisory Control Theory in Swarm Robotics [Volume 16, Issue 55, 2018, Pages 175-190]
  • Fereidoon, Abdolhossein Young's Modulus prediction of polyurethane and acrylonitrile butadiene styrene polymer blend based on phase morphology [Volume 16, Issue 52, 2018, Pages 1-13]
  • Feshki Farahani, Hassan A New Topology for Single Phase Voltage Source Multilevel Inverter Based on Reduction of Semiconductor Switches [Volume 16, Issue 52, 2018, Pages 97-108]

G

  • G, R CFD Investigation on Nanofluids Convective Heat Transfer in a Duct Containing Spherical Surfaces [Volume 16, Issue 52, 2018, Pages 347-361]
  • Galeban, Mohammad Reza Crack detection in beams using Hilbert-Huang transform [Volume 16, Issue 52, 2018, Pages 27-40]
  • Ganadzadeh Guilani, Hossein Modeling of VLE and LLE Systems by using Thermodynamic model with ANFIS Structures and GMDH Type-Neural Network [Volume 16, Issue 55, 2018, Pages 19-33]
  • Ghadimi, Siamak Crack Detection of Timoshenko Beam Using Frequency and Frequency Response Function [Volume 16, Issue 54, 2018, Pages 205-216]
  • Ghadiri Soufi, Elham Model of a Work Breakdown Structure (WBS) Framework and AOA Diagram for Efficient Project Management of Lead – Zinc Skarn Exploration with Exploratory Data [Volume 16, Issue 53, 2018, Pages 89-100]
  • Ghandehari, Erfan Offering four new models in the form of a hybrid methodology applied in order to promote the use [Volume 16, Issue 54, 2018, Pages 1-20]
  • Ghandehari, Erfan Presentation of a Combined Code Generator and its Development in the Form of New Capabilities with Service-Oriented Architecture Approach [Volume 16, Issue 54, 2018, Pages 105-123]
  • Ghasemi, Abdolmajid Experimental study and empirical modeling of lithium ion battery lifetime [Volume 16, Issue 55, 2018, Pages 35-40]
  • Ghasemi, Mohammad Reza A new and low cost proposed method for failure probability estimation based on Monte Carlo simulation [Volume 16, Issue 54, 2018, Pages 189-203]
  • Ghatreh Samani, Mohammadreza Presenting a Model and Heuristic Algorithm for Two-Echelon Location-Routing Problem under Uncertainty Considering the Simultaneous Pickup and Delivery [Volume 16, Issue 53, 2018, Pages 339-361]
  • Ghayoori Sales, Majid Data Tarn: A New Approach for Management and Real-Time Analyses of Big Data [Volume 16, Issue 55, 2018, Pages 133-154]
  • Ghazizadeh-Ahsaee, Mahdi The use of fault current limiter to reduce the operating time of relays [Volume 16, Issue 53, 2018, Pages 171-181]
  • Gh. Lovineh, Shirin Numerical simulation and theoretical study on effects of operating parameters in Persian Gulf desalination using vacuum membrane distillation [Volume 16, Issue 55, 2018, Pages 41-49]
  • Ghodrati Amiri, Gholamreza Development of PGA Attenuation Relationships for Iran [Volume 16, Issue 54, 2018, Pages 167-175]
  • Ghohani Arab, Hamed A new and low cost proposed method for failure probability estimation based on Monte Carlo simulation [Volume 16, Issue 54, 2018, Pages 189-203]
  • Gholamian, Seyyed Akbar An integrated model for controlling project delays based on the time buffer management approach [Volume 16, Issue 55, 2018, Pages 1-18]
  • Ghorbanzadeh Ahangari, Morteza Young's Modulus prediction of polyurethane and acrylonitrile butadiene styrene polymer blend based on phase morphology [Volume 16, Issue 52, 2018, Pages 1-13]

H

  • Haghighi Asl, ali Modeling of Petrochemical industries wastewater COD Removal with DOE&ANN [Volume 16, Issue 54, 2018, Pages 295-307]
  • Harbi, Reza Thermodynamic simulation of a wind turbine-fuel cell hybrid system with application in a distributed generation system [Volume 16, Issue 53, 2018, Pages 25-37]
  • Hatami, Arash Control of Horizontal Axis Wind Turbine with Synchronous Generator to Capture Maximum Energy of Wind [Volume 16, Issue 54, 2018, Pages 403-413]
  • Hemmat Esfe, Mohammad Artificial neural network modeling for prediction of thermal conductivity of functionalized MWCNTs/water nanofluids and a new empirical correlation [Volume 16, Issue 53, 2018, Pages 67-73]
  • Hoseinpour Gollo, Mohamad Study of the Effective Parameters in Laser Forming of Steel Sheets [Volume 16, Issue 52, 2018, Pages 41-52]
  • Hosseini-Motlagh, Seyyed-Mahdi Presenting a Model and Heuristic Algorithm for Two-Echelon Location-Routing Problem under Uncertainty Considering the Simultaneous Pickup and Delivery [Volume 16, Issue 53, 2018, Pages 339-361]
  • Hosseinzadeh, Seyed Amir Hamed Multi-objective optimization of average travel time for a metro line by considering both location and dispersion effects [Volume 16, Issue 52, 2018, Pages 331-345]
  • Hossinzadeh Saljooghi, Faranak Cost efficiency and return to scale in a two-stage network supply chain: Case study of drink companies in Iran [Volume 16, Issue 55, 2018, Pages 63-76]
  • Husseinzadeh Kashan, Ali Revenue Management Under Variable Resource Capacity Requirements and Importance Factor for Patient Classes in Hospitals [Volume 16, Issue 54, 2018, Pages 257-265]

I

  • Iranmanesh, Faezeh Investigation on Adding Passive Toe Joints to the Feet Structure of 2D Humanoid Robot [Volume 16, Issue 53, 2018, Pages 157-170]
  • Izadfar, Hamid Reza Calculation of Rotor’s Current and MMF in a Squirrel Cage Induction Machine [Volume 16, Issue 52, 2018, Pages 163-170]

J

  • J, M Settings in Employing Simulation Tools for Fast Determination of Time to Voltage Instability [Volume 16, Issue 55, 2018, Pages 401-410]
  • Jafari, Ramin Seismic Risk Assessment of Hamedan City [Volume 16, Issue 55, 2018, Pages 247-266]
  • Jahangir, Mohammad Hossein Determination of the lens water content for several different configurations of elliptical particles in unsaturated soils [Volume 16, Issue 52, 2018, Pages 267-276]
  • Jahangiri, Ali Failure analysis of stationary blades in a gas turbine compressor [Volume 16, Issue 54, 2018, Pages 351-360]
  • Javan Jafari, Abbas A Systematic Review of Intrusion Detection using Hidden Markov Models: Approaches, Applications, and Challenges [Volume 16, Issue 53, 2018, Pages 183-206]
  • Jokar, Abbas Presenting a Model and Heuristic Algorithm for Two-Echelon Location-Routing Problem under Uncertainty Considering the Simultaneous Pickup and Delivery [Volume 16, Issue 53, 2018, Pages 339-361]

K

  • Kafi, mohammad Ali Effects Of Rib Plates And Haunch On The Behavior Welded Prequalified Moment Connections Under Cyclic Loading [Volume 16, Issue 52, 2018, Pages 237-252]
  • Kafi, Mohammad Ali The Use of U Plates as Continuity plates of Box Column in Steel Structures Under Cyclic Loading [Volume 16, Issue 55, 2018, Pages 311-320]
  • Karimi, Mohammadreza Coordination of Wind Power Plants and Energy Storage Devices in Security-Constrained Unit Commitment Problem Using Robust Optimization [Volume 16, Issue 53, 2018, Pages 207-220]
  • Keshvari, Saman Data Tarn: A New Approach for Management and Real-Time Analyses of Big Data [Volume 16, Issue 55, 2018, Pages 133-154]
  • Keypour, Reza A novel control strategy for solar-wind hybrid energy systems based on optimal battery charge and discharge limits in various time domain [Volume 16, Issue 55, 2018, Pages 163-173]
  • KH, M Settings in Employing Simulation Tools for Fast Determination of Time to Voltage Instability [Volume 16, Issue 55, 2018, Pages 401-410]
  • Khajenoori, Masoud Investigation of Thermodynamic Model for Ceria Promoted Nickel Catalyst Supported on Nanocrystalline MgO in Dry Reforming of Methane [Volume 16, Issue 53, 2018, Pages 389-396]
  • Kheyri Namin, Omid The Use of U Plates as Continuity plates of Box Column in Steel Structures Under Cyclic Loading [Volume 16, Issue 55, 2018, Pages 311-320]
  • Khoob, Ehsan The use of fault current limiter to reduce the operating time of relays [Volume 16, Issue 53, 2018, Pages 171-181]
  • Khosroabadi, Mohammad INVESTIGATION OF DESIGN CODES RELIABILITY FOR SEISMIC DESIGN OF STEEL PLATE SHEAR WALLS CONSISTING OF SEVERAL PARAMETERS [Volume 16, Issue 52, 2018, Pages 277-297]
  • Kourehli, Seyed Sina Crack Detection of Timoshenko Beam Using Frequency and Frequency Response Function [Volume 16, Issue 54, 2018, Pages 205-216]

L

  • Lashgari, Mahmood Ultra-Fast Busbar Protection by Applying TT-transform on Superimposed Current Signals [Volume 16, Issue 53, 2018, Pages 135-147]

M

  • M, E Numerical investigation of counter flow polymer exchange membrane fuel cell with two channel [Volume 16, Issue 53, 2018, Pages 39-51]
  • Maghsoudi, iman Improving the efficiency of a serpentine inlet duct by using of Blowing Jet Vortex Generators flow control technique [Volume 16, Issue 53, 2018, Pages 9-23]
  • Mahmoodi Darian, Hossein An Efficient Method for Defining Multivariate Functions Using Expression Templates for Arrays in C++ and CUDA [Volume 16, Issue 55, 2018, Pages 113-131]
  • Mahmoodzadeh, Amir Generating Random Samples Using Response Surface Methodology without need to Distribution of Parameters [Volume 16, Issue 54, 2018, Pages 139-152]
  • Mahtabi, Ghorban Application of numerical simulation in determining the position and dimensions of weep hole of concrete channel under different groundwater levels [Volume 16, Issue 55, 2018, Pages 267-278]
  • Maleki, Ali Modeling and evaluation of Massey Ferguson tractor seat using finite element method [Volume 16, Issue 53, 2018, Pages 269-278]
  • Maleki, Ali A modified Canonical Correlation Analysis Method for SSVEP Frequency Recognition [Volume 16, Issue 55, 2018, Pages 199-207]
  • Malekinejad, Mohsen Determination Optimum Location of Outrigger and Belt Truss System in Tall Buildings with Non-Uniform Cross Section [Volume 16, Issue 53, 2018, Pages 289-297]
  • Mehrad, Mahsa A new technique for reducing self heating effect in MOSFETs with extended source and drain [Volume 16, Issue 53, 2018, Pages 149-155]
  • Mehryar, Reza Thermo-hydro-dynamic investigation of journal bearing by a two dimensional model [Volume 16, Issue 53, 2018, Pages 101-112]
  • Memarian, Farzaneh Young's Modulus prediction of polyurethane and acrylonitrile butadiene styrene polymer blend based on phase morphology [Volume 16, Issue 52, 2018, Pages 1-13]
  • Meshkani, Fereshteh Investigation of Thermodynamic Model for Ceria Promoted Nickel Catalyst Supported on Nanocrystalline MgO in Dry Reforming of Methane [Volume 16, Issue 53, 2018, Pages 389-396]
  • Mirtalaei, Sayyed Mohammad Mehdi Design, modeling and implementation of a high step up z-source converter for connection of renewable energy source to the electrical grid [Volume 16, Issue 53, 2018, Pages 221-229]
  • Mirzaei, Faezeh Simulation and Implementation of Obstacle Avoidance and Synchronization Tasks using Probabilistic and Timed Supervisory Control Theory in Swarm Robotics [Volume 16, Issue 55, 2018, Pages 175-190]
  • Moafi, Mohammad Saleh Presentation of a Combined Code Generator and its Development in the Form of New Capabilities with Service-Oriented Architecture Approach [Volume 16, Issue 54, 2018, Pages 105-123]
  • Moarefzadeh, Mohammad Reza A stochastic corrosion model for structural steels subject to sea waters [Volume 16, Issue 52, 2018, Pages 67-81]
  • Moetakef-Imani, Behnam Control of Horizontal Axis Wind Turbine with Synchronous Generator to Capture Maximum Energy of Wind [Volume 16, Issue 54, 2018, Pages 403-413]
  • Mofarahi, Masoud Dynamic Modeling of Charge and Discharge of Adsorbed Natural Gas storage Tank [Volume 16, Issue 54, 2018, Pages 309-326]
  • Mohammadi, Asghar Modeling and Simulation of Catalytic Direct Partial Oxidation of Methane to Methanol in a Fluidized-Bed Reactor [Volume 16, Issue 52, 2018, Pages 397-407]
  • Mohammadi, Hadiqe Modeling the interaction of water resources and value added in the Birjand Plain [Volume 16, Issue 55, 2018, Pages 279-298]
  • Mohebbi, Rasul Natural Convection Fluid Flow and Heat Transfer a Square Cavity with a Heated Triangular Obstacle Using Finite Element Method [Volume 16, Issue 55, 2018, Pages 361-373]
  • Mokhtari, Hadi Model of a Work Breakdown Structure (WBS) Framework and AOA Diagram for Efficient Project Management of Lead – Zinc Skarn Exploration with Exploratory Data [Volume 16, Issue 53, 2018, Pages 89-100]
  • Mokhtarian Asl, Mojtaba Application of response surface method to the prediction of TBM penetration rate [Volume 16, Issue 55, 2018, Pages 299-310]
  • Molladavoodi, Hamed Numerical Analysis of the Segmental Supporting System Under Earthquake Loading [Volume 16, Issue 54, 2018, Pages 177-187]
  • Mollahoseini, Zahra Numerical Investigation of the Strain Stiffening Behavior of Mesenchymal Stem Cells on Elastic Substrates [Volume 16, Issue 55, 2018, Pages 351-359]
  • Mollayi, Masoud Multi-Objective Optimization of Reinforced Concrete Frames using Genetic Algorithm and Weighted Sum Method [Volume 16, Issue 52, 2018, Pages 193-201]
  • Mollazadeh, Mitra Application of numerical simulation in determining the position and dimensions of weep hole of concrete channel under different groundwater levels [Volume 16, Issue 55, 2018, Pages 267-278]
  • Monfaredi, Khalil Design and Simulation of Second Order Sigma-Delta Modulator with Very High Precision and Low Power Consumption for Medical Applications [Volume 16, Issue 55, 2018, Pages 191-197]
  • Moradi, Mojtaba Optimal Dynamic Manipulation Workspace of a Single Link Robot Manipulator [Volume 16, Issue 54, 2018, Pages 429-441]
  • Moradi, Shapour Crack detection in beams using Hilbert-Huang transform [Volume 16, Issue 52, 2018, Pages 27-40]
  • Motaghed, Sasan Sobol sensitivity generalization for engineering and science applications [Volume 16, Issue 54, 2018, Pages 217-226]
  • Motahar, Sadegh Thermal performance modeling of unglazed transpired solar collectors [Volume 16, Issue 55, 2018, Pages 391-400]

N

  • Naderi, Ali A new tunneling carbon nanotube field effect transistor with linear doping profile at drain region: numerical simulation study [Volume 16, Issue 52, 2018, Pages 109-117]
  • Naderi, Hassan Data Tarn: A New Approach for Management and Real-Time Analyses of Big Data [Volume 16, Issue 55, 2018, Pages 133-154]
  • Naderpour, Hosein Effects of beech and eucalyptus sawdust as a supplementary material to improve the performance of composite panel [Volume 16, Issue 53, 2018, Pages 259-267]
  • Naderpour, Hosein Comparing the optimization of prestressed concrete bridge deck according to the AASHTO LRFD and AASHTO standard procedures using Cuckoo algorithm. [Volume 16, Issue 55, 2018, Pages 209-219]
  • Namdar, Mohammadreza Simultaneous optimization of mean and variance of objective functions in a supply chain problem under uncertainty [Volume 16, Issue 53, 2018, Pages 325-338]
  • Nasiri, Mohammad Mahdi The Comparison of the Integer Programming Models for Solving the Stage Shop Scheduling Problem [Volume 16, Issue 53, 2018, Pages 379-387]
  • Nazeri Tahrudi, Mohammad Comparing PAR and MPAR Models to Modeling the Monthly River Flow Rates Time Series Under the Influence of Meteorological Factors, The Case Study: Nazloochai River [Volume 16, Issue 52, 2018, Pages 183-191]
  • Nematinejad, Masoud Finite Element and Experimental Analysis of Bond Behavior Between Reinforcement and Concrete Containing Fibers, Silicafume and Nanosilica [Volume 16, Issue 54, 2018, Pages 153-166]
  • Nikoobin, Amin Determining the Range of Admissible Acceleration of Suspended Cable Robot [Volume 16, Issue 54, 2018, Pages 387-402]
  • Nikoobin, Amin Optimal Dynamic Manipulation Workspace of a Single Link Robot Manipulator [Volume 16, Issue 54, 2018, Pages 429-441]
  • Nikooei Mahani, Mehdi Generating Random Samples Using Response Surface Methodology without need to Distribution of Parameters [Volume 16, Issue 54, 2018, Pages 139-152]
  • Nozari, Hamed Stream Flow Prediction Using Support Vector Machine Based on Discharge and Precipitation Time series on Upstream Stations (Case Study: Taleh Zang Hydrometric Station) [Volume 16, Issue 54, 2018, Pages 95-104]
  • Nozari, Milad Presenting a model for production and transportation scheduling in automotive industry (a case study: Iran Khodro) [Volume 16, Issue 52, 2018, Pages 299-309]

O

  • Oroumiyeh, Mahya An Improved two-layer Model in the Logical Level Data Warehouse Designing [Volume 16, Issue 54, 2018, Pages 21-37]
  • Ostadi, Bakhtiar Revenue Management Under Variable Resource Capacity Requirements and Importance Factor for Patient Classes in Hospitals [Volume 16, Issue 54, 2018, Pages 257-265]

P

  • Paydar, Mohamad Mahdi Developing metaheuristic approaches to solve flow shop scheduling problem with worker assignment [Volume 16, Issue 54, 2018, Pages 283-293]
  • Pazoki, Mohammad Efficient Method for Fault Classification in Transmission Line Using Kernel Naive Bayes Classifier [Volume 16, Issue 52, 2018, Pages 119-129]
  • Pouyan, Ali Akbar Simulation and Implementation of Obstacle Avoidance and Synchronization Tasks using Probabilistic and Timed Supervisory Control Theory in Swarm Robotics [Volume 16, Issue 55, 2018, Pages 175-190]

R

  • R, S Numerical investigation of counter flow polymer exchange membrane fuel cell with two channel [Volume 16, Issue 53, 2018, Pages 39-51]
  • Rabie, Naghmeh Optimizing Pricing and Lot Sizing Decisions in a Supply Chain under Quantity Discount contract [Volume 16, Issue 54, 2018, Pages 241-255]
  • Radmanesh, Hamid Modeling and evaluation of technical, economical and environmental performance of molten carbonate fuel cell compared to micro turbine gas for the production of electricity and heat simultaneously [Volume 16, Issue 55, 2018, Pages 411-426]
  • Raeisi, Hamid Determination Optimum Location of Outrigger and Belt Truss System in Tall Buildings with Non-Uniform Cross Section [Volume 16, Issue 53, 2018, Pages 289-297]
  • Rahgozar, Reza Determination Optimum Location of Outrigger and Belt Truss System in Tall Buildings with Non-Uniform Cross Section [Volume 16, Issue 53, 2018, Pages 289-297]
  • Rahideh, Hossein Dynamic Modeling of Charge and Discharge of Adsorbed Natural Gas storage Tank [Volume 16, Issue 54, 2018, Pages 309-326]
  • Rahimi Rezaei, Amin Coordination of Wind Power Plants and Energy Storage Devices in Security-Constrained Unit Commitment Problem Using Robust Optimization [Volume 16, Issue 53, 2018, Pages 207-220]
  • Rahimpour, Esmaeel Numerical Investigation of the Strain Stiffening Behavior of Mesenchymal Stem Cells on Elastic Substrates [Volume 16, Issue 55, 2018, Pages 351-359]
  • Rahmani, Ali Revenue Management Under Variable Resource Capacity Requirements and Importance Factor for Patient Classes in Hospitals [Volume 16, Issue 54, 2018, Pages 257-265]
  • Rahmani, Hossein Comparing the optimization of prestressed concrete bridge deck according to the AASHTO LRFD and AASHTO standard procedures using Cuckoo algorithm. [Volume 16, Issue 55, 2018, Pages 209-219]
  • Raji, Mojtaba Numerical simulation and theoretical study on effects of operating parameters in Persian Gulf desalination using vacuum membrane distillation [Volume 16, Issue 55, 2018, Pages 41-49]
  • Rasooli, Mahmood Determining the Range of Admissible Acceleration of Suspended Cable Robot [Volume 16, Issue 54, 2018, Pages 387-402]
  • Rasoolzadegan, Abbas A Systematic Review of Intrusion Detection using Hidden Markov Models: Approaches, Applications, and Challenges [Volume 16, Issue 53, 2018, Pages 183-206]
  • Razavian Amrei, Seyed Ali Development of PGA Attenuation Relationships for Iran [Volume 16, Issue 54, 2018, Pages 167-175]
  • Razavian Amrei, Seyed Ali Seismic Risk Assessment of Hamedan City [Volume 16, Issue 55, 2018, Pages 247-266]
  • Razavian Amrei, Seyed Amin Development of PGA Attenuation Relationships for Iran [Volume 16, Issue 54, 2018, Pages 167-175]
  • Reisi, Hamideh Modeling and evaluation of Massey Ferguson tractor seat using finite element method [Volume 16, Issue 53, 2018, Pages 269-278]
  • Rezaei, Behnam Local and Remote Voltage and Reactive Power Control in the Presence of Induction Generators [Volume 16, Issue 52, 2018, Pages 83-96]
  • Rezvani, Mohammad Javad Manufacturing and analysis of dynamic and mechanical properties of rigid nanocomposite polyurethane foam reinforced by nano particles of SiC [Volume 16, Issue 53, 2018, Pages 1-7]
  • Rouhi, Saeed On the mechanical properties of polyvinyl pyrrolidone reinforced by single-walled carbon nanotubes using molecular dynamics simulations and finite element modeling [Volume 16, Issue 52, 2018, Pages 373-381]

S

  • S, S Settings in Employing Simulation Tools for Fast Determination of Time to Voltage Instability [Volume 16, Issue 55, 2018, Pages 401-410]
  • Saadatjoo, Fatemeh Offering four new models in the form of a hybrid methodology applied in order to promote the use [Volume 16, Issue 54, 2018, Pages 1-20]
  • Saadatjoo, Fatemeh Presentation of a Combined Code Generator and its Development in the Form of New Capabilities with Service-Oriented Architecture Approach [Volume 16, Issue 54, 2018, Pages 105-123]
  • Sadedel, Majid Investigation on Adding Passive Toe Joints to the Feet Structure of 2D Humanoid Robot [Volume 16, Issue 53, 2018, Pages 157-170]
  • Sadeghi, Sahar A modified Canonical Correlation Analysis Method for SSVEP Frequency Recognition [Volume 16, Issue 55, 2018, Pages 199-207]
  • Safarzadeh, Habibollah Exergy analysis of a direct-expansion solar-assisted heat pump system considering the effects of pressure drop of the R134a refrigerant flow [Volume 16, Issue 52, 2018, Pages 53-66]
  • Salari-rad, Hossein Numerical Analysis of the Segmental Supporting System Under Earthquake Loading [Volume 16, Issue 54, 2018, Pages 177-187]
  • Salmasi, Farzin Application of numerical simulation in determining the position and dimensions of weep hole of concrete channel under different groundwater levels [Volume 16, Issue 55, 2018, Pages 267-278]
  • Salmasnia, Ali Multi-objective optimization of average travel time for a metro line by considering both location and dispersion effects [Volume 16, Issue 52, 2018, Pages 331-345]
  • Sarparast, Hoda Lateral vibration control of a beam subjected to the harmonic external load using a nonlinear energy sink [Volume 16, Issue 55, 2018, Pages 375-390]
  • Sarshar, Mohammad Experimental study and empirical modeling of lithium ion battery lifetime [Volume 16, Issue 55, 2018, Pages 35-40]
  • Sedighizadeh, Mostafa Integrated control scheme for induction generator, fault current limiter, and energy storage in wind farms [Volume 16, Issue 55, 2018, Pages 87-100]
  • Shafie-khah, miadreza Impact of Electric Vehicles and Demand Response Program on Optimal Operation of Distribution System in the Framework of a New Bi-level Model [Volume 16, Issue 54, 2018, Pages 53-68]
  • SHAHROKHI, MAHMOUD Optimization of availability the systems with redundant considering the half-stat, deals and repair rate´s change [Volume 16, Issue 54, 2018, Pages 267-281]
  • Shahrtash, S. Mohammad Ultra-Fast Busbar Protection by Applying TT-transform on Superimposed Current Signals [Volume 16, Issue 53, 2018, Pages 135-147]
  • Shahrtash, S. Mohammad Settings in Employing Simulation Tools for Fast Determination of Time to Voltage Instability [Volume 16, Issue 55, 2018, Pages 401-410]
  • Sharbatdar, M,Kazem INVESTIGATION OF DESIGN CODES RELIABILITY FOR SEISMIC DESIGN OF STEEL PLATE SHEAR WALLS CONSISTING OF SEVERAL PARAMETERS [Volume 16, Issue 52, 2018, Pages 277-297]
  • Shariatmadar, Hashem Subset Simulation Method in Active Structural Control [Volume 16, Issue 53, 2018, Pages 279-288]
  • Sharifi, Yasser Effect of pitting corrosion on the load-carrying capacity of plate elements subjected to axial compression [Volume 16, Issue 55, 2018, Pages 221-234]
  • Soltani Mohammadi, Saeed Model of a Work Breakdown Structure (WBS) Framework and AOA Diagram for Efficient Project Management of Lead – Zinc Skarn Exploration with Exploratory Data [Volume 16, Issue 53, 2018, Pages 89-100]

T

  • Tahmasebpoor, Maryam Modeling the size of hydrophilic nanoparticles during fluidization with emphasis on the role of vapor of polar materials [Volume 16, Issue 52, 2018, Pages 383-395]
  • Tajmir, Golnaz Design, modeling and implementation of a high step up z-source converter for connection of renewable energy source to the electrical grid [Volume 16, Issue 53, 2018, Pages 221-229]
  • Taleizadeh, At Allah Optimizing Pricing and Lot Sizing Decisions in a Supply Chain under Quantity Discount contract [Volume 16, Issue 54, 2018, Pages 241-255]
  • Tarighat, Amir Damage Localization in Plate-Like Structures Using Wavelet Energy Analysis [Volume 16, Issue 53, 2018, Pages 299-313]
  • Tarighi, Payam Effects Of Rib Plates And Haunch On The Behavior Welded Prequalified Moment Connections Under Cyclic Loading [Volume 16, Issue 52, 2018, Pages 237-252]
  • Tirandaz, Nima Porous-filled helical double-pipe heat exchanger under asymmetric heat flux [Volume 16, Issue 52, 2018, Pages 409-418]
  • Toghraie semiromi, Davood Numerical investigation of nanofluid mixed convection heat transfer with variable properties within a shallow lid driven cavity [Volume 16, Issue 55, 2018, Pages 337-350]

V

  • Vahidi, Bahman Numerical Investigation of the Strain Stiffening Behavior of Mesenchymal Stem Cells on Elastic Substrates [Volume 16, Issue 55, 2018, Pages 351-359]
  • Valipour, Mohammad Sadegh A Mathematical modeling and optimization of solar chimney power plant by SA and PSO algorithm [Volume 16, Issue 53, 2018, Pages 75-87]
  • Valipour, Mohammad Sadegh Porous-filled helical double-pipe heat exchanger under asymmetric heat flux [Volume 16, Issue 52, 2018, Pages 409-418]

Y

  • Yarmohammadi, Hesam Integrated control scheme for induction generator, fault current limiter, and energy storage in wind farms [Volume 16, Issue 55, 2018, Pages 87-100]
  • Yavari, Najmeh Process-oriented integration in industrial information systems [Volume 16, Issue 53, 2018, Pages 363-378]
  • Yousefi-koma, Aghil Investigation on Adding Passive Toe Joints to the Feet Structure of 2D Humanoid Robot [Volume 16, Issue 53, 2018, Pages 157-170]

Z

  • Zandi Dare Gharibi, Mehrdad The use of fault current limiter to reduce the operating time of relays [Volume 16, Issue 53, 2018, Pages 171-181]
  • Zareiee, Meysam A new technique for reducing self heating effect in MOSFETs with extended source and drain [Volume 16, Issue 53, 2018, Pages 149-155]
  • Zarei Jaliani, Mohammad Experimental study and empirical modeling of lithium ion battery lifetime [Volume 16, Issue 55, 2018, Pages 35-40]
  • Zeynali, Rahman Performance modeling of nano structure graphene membrane for hydrogen separation using CFD methods [Volume 16, Issue 55, 2018, Pages 77-86]