Author Index

A

  • Abapour, Mehdi Hybrid Robust Stochastic Bidding Strategy for Wind Farms Integrated with Compressed Air Energy Storage and Power to Gas Technology [Volume 19, Issue 65, 2021, Pages 137-148]
  • Abbasi, STATISTICAL MODELING OF SYNTHESIZING OF ALUMINUM BASED NANOCOMPSOITE PARTICLES REINFORCED BY SiC VIA MECHANICAL ALLOYING PROCESS [Volume 10, Issue 29, 2012, Pages 43-60]
  • Abbasi, Abdollah Designing L1 Adaptive Control for stabilizing Chaotic Systems with Uncertainty in the model [Volume 16, Issue 52, 2018, Pages 171-181]
  • Abbasi, Mohammad Compliance of Time Sensitive Network Protocol with the Specifications of MIL-STD-1553B Standard for Aviation Applications [Volume 22, Issue 79, 2024, Pages 99-108]
  • Abbasi, Mohammad Javad A new combined method to diagnosis loss of excitation from stable power swing in doubly fed induction generator [Volume 15, Issue 51, 2017, Pages 159-169]
  • Abbasi, Pariya Experimental study of nanoparticles effect on the energy absorption of cylindrical nanocomposites in quasi-static axial loading [Volume 21, Issue 72, 2023, Pages 159-174]
  • Abbasi, Samira Classification of social media posts during the Corona crisis based on their polarity [Volume 21, Issue 74, 2023, Pages 81-93]
  • Abbasi, Shahriar Comparison of IGDT, TOAT and STC Methods in Robust Planning of Transmission Network Expansion in the Presence of Uncertainties [Volume 22, Issue 76, 2024, Pages 241-255]
  • Abbasi, Vahid Design and analysis of two input-one output converter based on quadratic boost converter to increase reliability of using renewable sources [Volume 21, Issue 74, 2023, Pages 65-80]
  • Abbasi, Vahid Proposing and Modeling an Ultrahigh Step-Up DC-DC Converter Including Two Stages Boost Converter, Switched Capacitor and Coupled Inductor [Volume 22, Issue 77, 2024, Pages 157-173]
  • Abbasian Arani, A.A. NUMERICAL INVESTIGATION OF NATURAL CONVECTION AROUND A CIRCULAR CYLINDER PLACED IN A CAVITY FILLED WITH NANOFLUID BY CHANGING THE LOCATION AND RADIUS [Volume 11, Issue 33, 2013, Pages 57-68]
  • Abbasian Arani, A.A. NUMERICAL INVESTIGATION OF NATURAL CONVECTION AROUND A CIRCULAR CYLINDER PLACED IN A CAVITY FILLED WITH NANOFLUID BY CHANGING THE LOCATION AND RADIUS [Volume 11, Issue 33, 2013, Pages 57-68]
  • Abbasian Arani, A.A. NUMERICAL INVESTIGATION OF BROWNIAN MOTION EFFECT ON NANOFLUID MIXED CONVECTION IN ENCLOSURE WITH A HOT CENTRAL HEAT SOURCE [Volume 11, Issue 34, 2013, Pages 15-29]
  • Abbasian Arani, Ali Akbar Numerical Study of fluid flow and heat transfer of mixed convection and entropy generation in a L-shaped cavity filled with nanofluid [Volume 15, Issue 50, 2017, Pages 135-147]
  • Abbasi Sooreshjani, Mehran Parametric study on lateral resistance and evaluation of seismic response modification factor-R of strap-braced cold-formed steel shear walls [Volume 15, Issue 49, 2017, Pages 175-188]
  • Abbas Nejad, Ali Simultaneously Optimization of Solar Water Heater Design Parameters Considering Consumption Patterns [Volume 15, Issue 48, 2017, Pages 111-123]
  • Abbaspour, Ghader A Trigeneration System Using Triple Pressure HRSG(Energy, Exergy and Thermoeconomic Analysis) [Volume 22, Issue 78, 2024, Pages 79-101]
  • Abbaszadeh, Hossein Modeling of Buckling Restrained Braces Subjected to Dynamic loads [Volume 7, Issue 18, 2009, Pages 1-11]
  • Abbaszadeh Darbani, Mohammad Investigating the effects of different wall boundary condition on methane / air catalytic stabilized reaction on platinum surface to produce uniform thermoelectric power. [Volume 20, Issue 69, 2022, Pages 131-140]
  • Abdi, Anita Multi-Objective Closed-loop Supply Chain Considering Vehicles and Solving by New Approaches in Metaheuristics [Volume 17, Issue 59, 2019, Pages 67-85]
  • Abdi, sajad Evaluation of safety, traffic and economic indicators of traffic calming measures using software simulation (case study: Qom city) [Volume 21, Issue 75, 2023, Pages 285-295]
  • Abdipourfard, mohammadreza Investigation of water flow from graphene membrane by molecular dynamics simulation [Volume 20, Issue 68, 2022, Pages 153-163]
  • Abdi Tahneh, Behrooz A new tunneling carbon nanotube field effect transistor with linear doping profile at drain region: numerical simulation study [Volume 16, Issue 52, 2018, Pages 109-117]
  • Abdolhosseini, Morteza Modeling by order reducing the load angle of a three-phase synchronous generator and designing an AOA-PID controller to control the load angle [Volume 21, Issue 75, 2023, Pages 83-99]
  • Abdollahi, Rohollah Modeling by order reducing the load angle of a three-phase synchronous generator and designing an AOA-PID controller to control the load angle [Volume 21, Issue 75, 2023, Pages 83-99]
  • Abdollahzadeh, BEHAVIOR FACTOR OF STEEL DUAL FRAMES WITH LARGE- SCALED CONCENTRICALLY BRACING SYSTEMS [Volume 10, Issue 31, 2012, Pages 1-13]
  • Abdoos, AN INTELLIGENT METHOD FOR DETECTION AND CLASSIFICATION OF POWER QUALITY EVENTS [Volume 9, Issue 27, 2011, Pages 23-36]
  • Abdullah, EXPERIMENTAL INVESTIGATION OF THE TRANSIENT JET EMANATING FROM THE PROTOTYPE DIRECT GASEOUS INJECTOR [Volume 9, Issue 25, 2011, Pages 21-31]
  • Abdzadeh, Behnam Multi-objective optimization of average travel time for a metro line by considering both location and dispersion effects [Volume 16, Issue 52, 2018, Pages 331-345]
  • Abedi, Mohsen Optimization of scale formation rate in heat exchangers using thermohydraulic theory [Volume 21, Issue 72, 2023, Pages 195-204]
  • Abedifard, Ramin Non- Fourier Heat Transfer and Fluid Flow Simulation in Keyhole Plasma Arc Welding Process [Volume 14, Issue 44, 2016, Pages 35-47]
  • Abedini, Esmaeil Clearing for Coordinated Electricity and Gas Markets [Volume 19, Issue 64, 2021, Pages 53-66]
  • Abedinia, O. OPTIMAL DESIGN OF FUZZY POWER SYSTEM STABILIZER IN MULTI-MACHINE ENVIRONMENT BY HARMONY SEARCH ALGORITHM [Volume 12, Issue 36, 2014, Pages 1-15]
  • Abedinia, Oveis Optimal Distribution of Reactive Power based on Shark Smell Optimization with Pareto Criterion in Power System [Volume 14, Issue 45, 2016, Pages 133-144]
  • Abedpour, Effect of pounding in seismic demand of seismic isolated structures [Volume 9, Issue 24, 2011, Pages 53-64]
  • Abed Zahmatkesh Pasand, Saeid Numerical study of the effect of adding corona discharge based on plasma actuator on flow control performance in a horizontal axis wind turbine with rough surfaces [Volume 21, Issue 74, 2023, Pages 291-303]
  • Abolbashari, Mohammad Hossein Performance of the Evolutionary Structural Optimization for Material with Elasto-Plastic Behavior [Volume 15, Issue 50, 2017, Pages 149-167]
  • Abolfathi, Saman Experimental study on The Angle of attack effect on Hydraulic- Thermal performance of a cam-shaped tube with constant heat flux in cross flow [Volume 18, Issue 60, 2020, Pages 27-37]
  • Abolmasoumi, Amir Hossein Design of an Energy Regeneration System for Pressure Reducing Stations of Crude Oil Pipeline [Volume 21, Issue 72, 2023, Pages 31-47]
  • Abrishamifar, MODELING AND NUMERICAL ANALYSIS OF THYRISTOR BASED CONVERTERS BY MULTI-VARIABLE RUNGE-KUTTA ALGORITHM [Volume 10, Issue 29, 2012, Pages 33-42]
  • Adampira, Mohammad Evaluation of Influential Factors on the Dynamic Compaction Operation of Granular Soils Based on Fuzzy Method [Volume 13, Issue 43, 2016, Pages 143-158]
  • Adlparvar, Optimized Analysis and Design of the link Beam With Eccentrically Braced Frame [Volume 8, Issue 22, 2010, Pages 69-81]
  • Afrand, Masoud Artificial neural network modeling for prediction of thermal conductivity of functionalized MWCNTs/water nanofluids and a new empirical correlation [Volume 16, Issue 53, 2018, Pages 67-73]
  • Afshari, D. Investigation of welding parameters effect on Nuget size in resistance spot welding of Magnesium alloys [Volume 14, Issue 44, 2016, Pages 1-9]
  • Afzalnejad, Omid Investigation of Chirality Effect on Axial and Torsional Buckling Behavior of SWCNTs Using Finite Element Method [Volume 15, Issue 48, 2017, Pages 61-71]
  • Aghaee, A. NUMERICAL INVESTIGATION OF BROWNIAN MOTION EFFECT ON NANOFLUID MIXED CONVECTION IN ENCLOSURE WITH A HOT CENTRAL HEAT SOURCE [Volume 11, Issue 34, 2013, Pages 15-29]
  • Aghaee, Alireza Numerical Study of fluid flow and heat transfer of mixed convection and entropy generation in a L-shaped cavity filled with nanofluid [Volume 15, Issue 50, 2017, Pages 135-147]
  • Aghaee, Alireza Numerical Study of fluid flow and heat transfer of mixed convection and entropy generation in a L-shaped cavity filled with nanofluid [Volume 15, Issue 50, 2017, Pages 135-147]
  • Aghaee Attar, milad Prediction of residual stress and elasto-plastic strains distribution in disk keyhole laser welding of dissimilar joining between copper & 304 stainless steel [Volume 18, Issue 63, 2020, Pages 151-166]
  • Aghaei, Alireza Numerical study of mixed convection and entropy generation in enclosure with two circular heat source filled with nanofluid [Volume 14, Issue 47, 2016, Pages 199-211]
  • Aghaei, Jamshid Coordination of Wind Power Plants and Energy Storage Devices in Security-Constrained Unit Commitment Problem Using Robust Optimization [Volume 16, Issue 53, 2018, Pages 207-220]
  • Aghagolzadeh, Ali Pyramid Image Fusion Based on Contourlet and Enhanced Structural Decomposition [Volume 21, Issue 73, 2023, Pages 71-92]
  • Aghakhani, Hashem Modeling and Fault Detection of Quadrotor with Rotor Thrust Deviation Fault [Volume 19, Issue 67, 2021, Pages 245-262]
  • Aghebati, Behnam Effect of pitting corrosion on the load-carrying capacity of plate elements subjected to axial compression [Volume 16, Issue 55, 2018, Pages 221-234]
  • Aghelan, Mohsen Supply chain network redesign to make resiliency with proposing “two-phase establishment facilities” as risk mitigation strategy [Volume 17, Issue 56, 2019, Pages 327-346]
  • Aghelan, Mohsen Designing of a four-level closed loop Supply Chain Network with an Integration Approach for Economic, Environmental, and Social Responsibility about Employees [Volume 17, Issue 57, 2019, Pages 69-92]
  • Ahadi, Mohammad Reza Modeling and Analysis of Urban and Rural Bus Accidents [Volume 12, Issue 38, 2014, Pages 59-74]
  • Ahadi-Jomairan, Navid Investigating the Effect of Deactivation Rate Constant of Polymer-Based Silver Catalyst on the Reduction of Pollutant 4-Nitrophenol to 4-Aminophenol [Volume 22, Issue 77, 2024, Pages 117-127]
  • Ahangarani Farahani, Alireza Design, construction, modeling and estimation of the second stage linear model of laboratory drone with cold gas thrusters based on genetic algorithm [Volume 22, Issue 77, 2024, Pages 1-12]
  • Ahangarpour, Ameneh Modeling of thermal conductivity of ethylene glycol nanofluids containing carbon nanotubes by Multilayer Perceptron neural network [Volume 17, Issue 59, 2019, Pages 1-9]
  • Ahangrani Farahani, Alireza Estimation of parameters of a laboratory attitude control simulator using least squares method and hybrid intelligent optimization [Volume 20, Issue 69, 2022, Pages 29-39]
  • Ahmadi, INVESTIGATION THE BEHAVIOR AND COMPARISON OF RELIABLE CODES ON CONCRETE-STEEL COMPOSITE COLUMNS [Volume 8, Issue 22, 2010, Pages 37-49]
  • Ahmadi, Ahmad Investigation of the Effects of Viscoelastic Support Properties Simulated by the Generalized Kelvin-Voigt Model on the Axial Vibration of a Rod [Volume 13, Issue 41, 2015, Pages 93-111]
  • Ahmadi, Amir Mohammad A Transformer-Based Model for Abnormal Activity Recognition [Volume 22, Issue 76, 2024, Pages 213-221]
  • Ahmadi, Iraj CT Saturation Detection with Calculation of Instantaneous Impedance of Magnetic Branch Using FILT [Volume 15, Issue 51, 2017, Pages 371-380]
  • Ahmadi, M. Natural convection of Al2O3-water nanofluid with variable properties in a square enclosure with heat source and heat sink on the vertical walls [Volume 15, Issue 49, 2017, Pages 1-16]
  • Ahmadi, Mahdi An Applicable Control-Relevant Method for Nonlinearity Assessment using Gap Metric [Volume 22, Issue 77, 2024, Pages 261-271]
  • Ahmadi, Mahmood An Intrusion Detection System Based on Deep Learning and Metaheuristic Algorithm for IOT [Volume 22, Issue 76, 2024, Pages 69-83]
  • Ahmadi, Masoud Effects of beech and eucalyptus sawdust as a supplementary material to improve the performance of composite panel [Volume 16, Issue 53, 2018, Pages 259-267]
  • Ahmadi, Nima Numerical investigation of counter flow polymer exchange membrane fuel cell with two channel [Volume 16, Issue 53, 2018, Pages 39-51]
  • Ahmadi, Saman Modeling and simulation of Energy managements for fuel cell hybrid vehicle [Volume 15, Issue 50, 2017, Pages 1-16]
  • Ahmadi, Saman Modeling Doubly Fed Induction Generator Based Wind Farms by Aggregating the Mechanical Parts Using Clustering by Power Coefficient [Volume 18, Issue 60, 2020, Pages 169-182]
  • Ahmadi, Seysd Ali MECHANICAL BUCKLING ANALYSIS OF FUNCTIONALLY GRADED THICK CYLINDRICAL SHELLS USING THIRD ORDER SHEAR DEFORMATION THEORY [Volume 12, Issue 38, 2014, Pages 129-142]
  • Ahmadiahangar, Roya A New Real-Time Optimization-Based Energy Management Strategy for Battery/Supercapacitor Hybrid Storage System in DC Microgrid [Volume 21, Issue 73, 2023, Pages 17-30]
  • Ahmadian Ramaki, Ali A Systematic Review of Intrusion Detection using Hidden Markov Models: Approaches, Applications, and Challenges [Volume 16, Issue 53, 2018, Pages 183-206]
  • Ahmadi Broughani, FINITE ELEMENT ANALYSIS OF FRACTURE MECHANICS OF WHEEL-RAIL [Volume 9, Issue 26, 2011, Pages 23-31]
  • Ahmadi Danesh Ashtiyani, Fakhroddin NUMERICALLY INVESTIGATION OF THE BEHAVIOR OF LONG LINK-TO-COLUMN CONNECTIONS WITH REDUCED SECTION [Volume 15, Issue 49, 2017, Pages 151-160]
  • Ahmadigorji, Masoud Dynamic expansion planning of power distribution grids with distributed generation resources using a new two-level optimization algorithm [Volume 14, Issue 44, 2016, Pages 143-157]
  • Ahmadnejad Zarnaghi, Amir Damage Localization in Plate-Like Structures Using Wavelet Energy Analysis [Volume 16, Issue 53, 2018, Pages 299-313]
  • Ahmadpoor, Babak Simulation study of a semi_circular Caisson Breakwater in a Non-uniform State in a Shallow Water Situation [Volume 18, Issue 60, 2020, Pages 183-199]
  • Ahmadyfard, Ali Reza A New and Efficient Feature Extraction Method for Robust Speech Recognition Based on Fractional Fourier Transform and Differential Evolution Optimizer [Volume 18, Issue 61, 2020, Pages 85-96]
  • Ajam, Hossein Numerical and Experimental Study of Ventilation Effects on Ventilated Cavitating Flow [Volume 15, Issue 51, 2017, Pages 29-41]
  • Ajri, Masoud Mechanical Properties Analysis of a Monolayer Biphenylene at Different Temperatures [Volume 22, Issue 76, 2024, Pages 177-187]
  • Ajri, Masoud Molecular Dynamics Investigation of the Mechanical Properties of Germanium Reinforced with Iron Nanoparticles at Different Speeds [Volume 22, Issue 79, 2024, Pages 109-119]
  • Akbari, NUMERICAL ANALYSIS EFFECT OF AIRCRAFT MAIN GEARS ON THE CRITICAL ZONES OF RUNWAY RIGID PAVEMENT [Volume 10, Issue 29, 2012, Pages 61-70]
  • Akbari, ANALYTICAL SOLUTION OF NON-FOURIER HEAT CONDUCTION PROBLEM ON A SLAB UNDER CONVECTION BOUNDARY CONDITIONS [Volume 11, Issue 32, 2013, Pages 69-81]
  • Akbari, mohammad THE INFLUENCE OF GRAVITY ON A MICROFLUIDIC MIXED CONVECTION BY APPLYING LATTICE BOLTZMANN METHOD [Volume 11, Issue 35, 2013, Pages 77-94]
  • Akbari, Younes Script independent offline writer identification from handwriting samples based on texture using wavelet transform in Persian-English languages [Volume 18, Issue 63, 2020, Pages 1-13]
  • Akbari Alashti, Reza MECHANICAL BUCKLING ANALYSIS OF FUNCTIONALLY GRADED THICK CYLINDRICAL SHELLS USING THIRD ORDER SHEAR DEFORMATION THEORY [Volume 12, Issue 38, 2014, Pages 129-142]
  • Akbari Foroud, Asghar Maintenance Scheduling of Wind Units from the Power Plant Owner’s Perspective with the Objective of Minimizing Economic Loss [Volume 22, Issue 77, 2024, Pages 175-188]
  • Akbari Foroud, Asghar Investigating the Factors Affecting the Transient Overvoltages Caused by Lightning in the Low-Voltage Network and the Role of the SPD Installed in the Substation in Protecting the Network [Volume 22, Issue 76, 2024, Pages 223-239]
  • Akbari Torkestani, Javad An ensemble deep learning model to enhance feature representation for entity detection [Volume 20, Issue 69, 2022, Pages 103-112]
  • Akbari Zadeh, Mohammad Modeling of VLE and LLE Systems by using Thermodynamic model with ANFIS Structures and GMDH Type-Neural Network [Volume 16, Issue 55, 2018, Pages 19-33]
  • Akbarpour, Abolfazl Modeling the interaction of water resources and value added in the Birjand Plain [Volume 16, Issue 55, 2018, Pages 279-298]
  • Akbarzadeh, Pooria The effect of the blowing and suction from one or two positions over the suction surface of NACA0012 airfoil on aerodynamic performance in turbulent flow [Volume 15, Issue 51, 2017, Pages 331-340]
  • Akhavein, Ali Architecture of Electrical-energy Grids, Why and How? [Volume 19, Issue 65, 2021, Pages 103-114]
  • Akhlaghi, Fatemeh Evaluation of Chahchahe Earth Dam Behaviour during Construction and First Impoundment Stage Using the Results of Monitoring and Back Analysis [Volume 17, Issue 59, 2019, Pages 11-24]
  • Akhlaghian Tab, Fardin A New Deep Vision-Based Identifier As An Intelligent Herbicide Spraying Agent For Potato Farm Application [Volume 22, Issue 79, 2024, Pages 79-97]
  • Alaee, ON THE FINITE ELEMENT MODELING OF RC BEAMS SHEAR-STRENGTHENED USING NSM-FRP [Volume 7, Issue 19, 2009, Pages 69-84]
  • Alaei, Milad Optimal scheduling of home appliances using a demand response model considering the residents welfare [Volume 21, Issue 72, 2023, Pages 69-82]
  • Alamatian, Javad the TMD design based on complex stiffness theory [Volume 15, Issue 51, 2017, Pages 171-180]
  • Alavi, Sayed Ehsan Design of a Hierarchical Fuzzy Control System to Guide the Robot and Prevent Collisions with Obstacles [Volume 22, Issue 78, 2024, Pages 317-327]
  • Alavinezhad, Mehdi Identifying damage location and severity in a template platform located in Persian Gulf using the Improved modal strain energy [Volume 19, Issue 67, 2021, Pages 167-179]
  • Alavi Nia, Ali Numerical analysis of the effect of tubes distance on the mechanical behavior and energy absorption of nested thin-walled tubes [Volume 14, Issue 45, 2016, Pages 33-47]
  • Alavi Nia, Ali Experimental and numerical investigation of hole and edge radius effect on collapse properties of cylindrical absorbers under axial impact loading [Volume 16, Issue 53, 2018, Pages 53-65]
  • Alaviyoun, STUDY OF EFFECT OF CUPPER CORE ON TEMPERATURE AND EROSION OF ELECTRODE [Volume 9, Issue 25, 2011, Pages 1-9]
  • Albooyeh, SCALING OF OPERATIONAL MODE SHAPES USING SENSITIVITY ANALYSIS [Volume 7, Issue 19, 2009, Pages 1-10]
  • Albooyeh, NUMERICAL AND EXPERIMENTAL CONSIDERATION OF FREQUENCY DOMAIN DECOMPOSITION METHOD FOR MODAL PARAMETERS IDENTIFICATION OF STRUCTURE [Volume 8, Issue 21, 2010, Pages 83-94]
  • Alborzi, Mahmood Hierarchical Clustering of Residential Appliances Considering the Characteristics of the Appliances [Volume 22, Issue 78, 2024, Pages 283-296]
  • Ali-akbar, EXPERIMENTAL AND NUMERICAL STUDY OF TEMPERATURE DISTRIBUTION AND DETERMINATION OF RESIDUAL STRESSES DUE TO WELDING OF PLATES [Volume 9, Issue 27, 2011, Pages 49-59]
  • Ali Asghary, Mortaza Load-Frequency Control of a Hybrid Islanded Microgrid with a Fractional Order Fuzzy PID Controller Optimized by Cheetah Algorithm [Volume 22, Issue 78, 2024, Pages 217-232]
  • Alibeyki, Davoud Thermo-hydro-dynamic investigation of journal bearing by a two dimensional model [Volume 16, Issue 53, 2018, Pages 101-112]
  • Alidoost Abadikhah, Farzam Seismic Risk Assessment of Hamedan City [Volume 16, Issue 55, 2018, Pages 247-266]
  • Alielahi, Hamid Evaluation of Influential Factors on the Dynamic Compaction Operation of Granular Soils Based on Fuzzy Method [Volume 13, Issue 43, 2016, Pages 143-158]
  • Aligoodarz, NUMERICAL SIMULATION OF SGT-600 GAS TURBINE COMBUSTOR AND FLOW FIELD UNDER OPERATION CONDITION [Volume 10, Issue 31, 2012, Pages 25-35]
  • Aliheidari Bioki, Tahereh Improvement of DEA approach for clustering credit rating of customer in banks [Volume 13, Issue 41, 2015, Pages 59-74]
  • Aliheydari Bioki, Tahereh System dynamics modeling and simulation of power plant maintenance process considering safety improvement [Volume 19, Issue 67, 2021, Pages 85-108]
  • Aliheydari Bioki, Tahereh Modeling the Risks of Blockchain Development in Improving the Resilience of the Medical Equipment Supply Chain [Volume 22, Issue 78, 2024, Pages 141-156]
  • Alijani, Ali Analytical and Numerical Modeling of Stress Intensity Factor in I-Shaped Cross Sections of Cracked Beams [Volume 17, Issue 56, 2019, Pages 131-142]
  • Alikhani Mohammad Abad, EXPERIMENTAL INVESTIGATION AND MODELING OF SIMULTANEOUS HEAT & MASS TRANSFER IN THE HORIZONTAL CHANNEL WITH THE WALL EFFECT [Volume 9, Issue 24, 2011, Pages 83-95]
  • Alimirzaloo, Vali Optimization of the roll forming process of U channels using a hybrid response surface and desirability function approach [Volume 15, Issue 51, 2017, Pages 237-250]
  • Alinejad, Javad Droplet Breakup with Unequal sized in Symmetric Y-junction Microchannel [Volume 20, Issue 70, 2022, Pages 79-91]
  • Alinejad, Mehdi A Low Power CMOS UWB LNA with Sub-1V Supply Voltage and Noise Cancellation Technique [Volume 22, Issue 77, 2024, Pages 207-220]
  • Alinejad-Beromi, Y. SIX-PHASE LINEAR SWITCHED RELUCTANCE MOTOR DRIVE FOR ELEVATOR [Volume 12, Issue 36, 2014, Pages 53-63]
  • Alipour, Aref Application of response surface method to the prediction of TBM penetration rate [Volume 16, Issue 55, 2018, Pages 299-310]
  • Aliyari Shoorehdeli, Mahdi Lyapunov stability analysis in the training of type 2 neuro-fuzzy inference system with a hybrid algorithm based on gradient descent and Kalman filter [Volume 20, Issue 68, 2022, Pages 85-100]
  • Alizadeh, Adel Modeling of fatigue life in double shear lap joints using artificial neural networks [Volume 15, Issue 49, 2017, Pages 55-63]
  • Alizadeh, Mohammad Planning of Fast Charging Station for Electric Vehicles Equipped With Renewable Energy Sources and Energy Storage System Considering Economic and Environmental Objectives [Volume 22, Issue 77, 2024, Pages 245-259]
  • Alizadeh, Mohsen Intelligent Fault Diagnosis of Wind Turbines Using Adaptive Fuzzy Threshold [Volume 19, Issue 67, 2021, Pages 151-166]
  • Alizadeh, Morteza Seismic Evaluation of Steel Moment Frames Rehabilitated with CBF, EBF and BRBF Braced Systems [Volume 14, Issue 47, 2016, Pages 95-114]
  • Alizadeh, Yunes On the mechanical properties of polyvinyl pyrrolidone reinforced by single-walled carbon nanotubes using molecular dynamics simulations and finite element modeling [Volume 16, Issue 52, 2018, Pages 373-381]
  • Allame, Amir Maintenance Scheduling of Wind Units from the Power Plant Owner’s Perspective with the Objective of Minimizing Economic Loss [Volume 22, Issue 77, 2024, Pages 175-188]
  • Amanian, GEOMETRY OPTIMIZATION OF TRIANGLE LABYRINTH SPILLWAY USING ANFIS MODELS AND GENETIC ALGORITHMS [Volume 7, Issue 19, 2009, Pages 57-68]
  • Ameli, Mohammad Taghi Local and Remote Voltage and Reactive Power Control in the Presence of Induction Generators [Volume 16, Issue 52, 2018, Pages 83-96]
  • Ameli Kalkhoran, Seyed Nader Study of the Effective Parameters in Laser Forming of Steel Sheets [Volume 16, Issue 52, 2018, Pages 41-52]
  • Amid, Elahe Segmentation of Corridor Images for Structure Based Robot Navigation [Volume 20, Issue 70, 2022, Pages 225-241]
  • Amid Khatibi Bardsiri, Amid A Novel Hybrid Model to Increase the Accuracy of Case Based Reasoning Method in Software Development Effort Estimation [Volume 16, Issue 54, 2018, Pages 39-52]
  • Amidpour, Majid Simultaneously Optimization of Solar Water Heater Design Parameters Considering Consumption Patterns [Volume 15, Issue 48, 2017, Pages 111-123]
  • Amin Beidokhti, INVESTIGATION OF CITY CYCLE EFFECTS ON FUEL CONSUMPTION AMOUNT [Volume 7, Issue 19, 2009, Pages 47-56]
  • Amini, Amir A New Heterostructure Junctionless Tunnel Field Effect Transistor with Silicon-on-Nothing Technique for DC Parameter Improvement [Volume 22, Issue 76, 2024, Pages 45-53]
  • Amini, Mohammad Numerical Evaluation of Thermal Comfort and Indoor Air Quality in an Office Space Equipped with a Radiant Ceiling Cooling System and Hybrid Radiative-Convective Cooling System [Volume 22, Issue 77, 2024, Pages 37-56]
  • Aminizadeh, Nasrin Numerical simulation of laminar forced convection flow with entropy generation analysis in a duct with two expansions - Blocked-off method [Volume 17, Issue 56, 2019, Pages 73-83]
  • Amin-Tahmasbi, Hamzeh Providing a mathematical optimization model for the multi-product supply chain despite the possibility of supplier disruption under sanctions (Case Study of Refinery Repair Industries) [Volume 18, Issue 60, 2020, Pages 107-125]
  • Aminzadeh, Hamed Modeling and Calibration of Linear and Nonlinear Gain Factors in Different Stages of Pipelined Analog-to-Digital Converters Using a Modified Correlation Algorithm [Volume 17, Issue 56, 2019, Pages 101-109]
  • Amirabadi, Optimising the Abrasive Water Jet Cutting of Glass Using Artificial Neural Network and Genetic algorithm [Volume 8, Issue 23, 2011, Pages 25-35]
  • Amirabadi, Optimising the Abrasive Water Jet Cutting of Glass Using Artificial Neural Network and Genetic algorithm [Volume 8, Issue 23, 2011, Pages 25-35]
  • Amirabadi, Hossein MODELING OF ELECTRICAL DISCHARGE MACHINING PROCESS USING NEURAL NETWORK AND ITS OPTIMIZATION USING FIREFLY ALGORITHM [Volume 12, Issue 37, 2014, Pages 1-14]
  • Amirabadi, Hossein Numerical and Experimental Investigation on Springback of AL5083-H111 alloy Sheet in Warm U-Bending Conditions [Volume 17, Issue 56, 2019, Pages 13-21]
  • Amiri, Fatemeh Classification of social media posts during the Corona crisis based on their polarity [Volume 21, Issue 74, 2023, Pages 81-93]
  • Amiri, Maghsoud Co-optimized bidding strategy of an integrated wind-thermal system in electricity day ahead and reserve market under uncertainties [Volume 21, Issue 75, 2023, Pages 29-51]
  • Amiri Delouei, Amin Analytical Efficiency Comparison of Multi-Layer Composite Pin Fins under the Different Thermal Boundary Conditions [Volume 13, Issue 43, 2016, Pages 67-77]
  • Amirioun, Mohammad Hassan Optimal scheduling of home appliances using a demand response model considering the residents welfare [Volume 21, Issue 72, 2023, Pages 69-82]
  • Amjady, EVALUATION OF VOLTAGE STABILITY DYNAMIC LOADING MARGIN CONSIDERING THE EFFECT OF LOAD MODELS, EXCITATION SYSTEM PARAMETERS AND REACTIVE POWER GENERATION LIMITS OF GENERATORS WITH A COMBINATION METHOD [Volume 8, Issue 20, 2010, Pages 39-55]
  • Amjady, OPTIMUM STOCHASTIC SELF-SCHEDULING FOR GENCOS CONSIDERING POOL AUCTION AND BILATERAL CONTRACTS [Volume 9, Issue 24, 2011, Pages 21-28]
  • Amjady, SHORT-TERM HYDROTHERMAL COORDINATION CONSIDERING SECURITY CONSTRAINTS AND VOLTAGE STABILITY [Volume 10, Issue 28, 2012, Pages 53-67]
  • Amjady, N. EVALUATION OF EFFECT OF REACTIVE POWER CONTROL STRATEGY BASED ON VOLTAGE TERMINAL OF GENERATORS ON LIMIT INDUCED BIFURCATION AND DYNAMIC VOLTAGE STABILITY MARGIN [Volume 11, Issue 33, 2013, Pages 69-81]
  • Amjady, N. OPTIMAL DESIGN OF FUZZY POWER SYSTEM STABILIZER IN MULTI-MACHINE ENVIRONMENT BY HARMONY SEARCH ALGORITHM [Volume 12, Issue 36, 2014, Pages 1-15]
  • Amjady, Nima Multi-objective Multi-area Environmental and Economic Dispatch Using Cuckoo Optimization Algorithm [Volume 12, Issue 37, 2014, Pages 89-104]
  • Amjady, Nima a Review of Metaheuristic Algorithms in Optimization [Volume 12, Issue 38, 2014, Pages 27-43]
  • Amjady, Nima Dynamic expansion planning of power distribution grids with distributed generation resources using a new two-level optimization algorithm [Volume 14, Issue 44, 2016, Pages 143-157]
  • Amjady, Nima Optimal Distribution of Reactive Power based on Shark Smell Optimization with Pareto Criterion in Power System [Volume 14, Issue 45, 2016, Pages 133-144]
  • Amjady, Nima Prevention of Transient and Voltage Instabilities Using A Remedial Action Scheme Based On Generation Shedding and Load Cut [Volume 14, Issue 46, 2016, Pages 137-150]
  • Amjady, Nima Multiyear Non-Deterministic Power System Expansion Planning Considering Wind ‎Farms Using a Hybrid Combination of Stochastic ‎Programming and Minimax Regret Criterion [Volume 14, Issue 47, 2016, Pages 41-50]
  • Amjady, Nima Probabilistic optimal power flow to determine the Locational marginal price considering wind generation [Volume 15, Issue 48, 2017, Pages 165-182]
  • Amjady, Nima Anti-Hazard Wrist Strap with the capability of sensing phase to phase electrocution by using of RF transceivers modules [Volume 15, Issue 51, 2017, Pages 147-157]
  • Amjady, Nima Prediction of operating conditions of the power system considering reactive power limits of generators and dynamic voltage stability margin by using neural network [Volume 15, Issue 51, 2017, Pages 341-350]
  • Amjady, Nima Static Security Evaluation of Power Systems Considering Uncertainties Using a Point Estimation Method [Volume 15, Issue 51, 2017, Pages 359-370]
  • Amoozegar, Maryam Online and Robust Anomaly Detection using Recurrent Neural Network [Volume 21, Issue 74, 2023, Pages 243-254]
  • Amrahnejad, ANALYSIS OF AXISYMMETRIC SHEET HYDROFORMING PROCESS [Volume 10, Issue 31, 2012, Pages 49-57]
  • Anbarheydari, Akram 4H-SiC MESFET with darin-side and undoped region for modifying charge distribution and high power applications [Volume 13, Issue 43, 2016, Pages 121-127]
  • Ansari, SHORT-TERM HYDROTHERMAL COORDINATION CONSIDERING SECURITY CONSTRAINTS AND VOLTAGE STABILITY [Volume 10, Issue 28, 2012, Pages 53-67]
  • Ansari, Mohammadreza Flexible and Short-term bidding strategy of Hybrid Transmission Operating Company in day-ahead energy market with considering storage resources [Volume 20, Issue 70, 2022, Pages 195-208]
  • Ansari, Mohammad Reza Optimization and control of hybrid vehicles with considering penalty factors for emission and based on the PSO algorithm [Volume 17, Issue 57, 2019, Pages 227-239]
  • Ansari, Reza On the mechanical properties of polyvinyl pyrrolidone reinforced by single-walled carbon nanotubes using molecular dynamics simulations and finite element modeling [Volume 16, Issue 52, 2018, Pages 373-381]
  • Arefi, Reza Non-invasive Determination of Ankle Rotation Axes Using a Robotic Gyroscopic Mechanism [Volume 21, Issue 75, 2023, Pages 193-204]
  • Arefkhani, Hamed Estimation of parameters of a laboratory attitude control simulator using least squares method and hybrid intelligent optimization [Volume 20, Issue 69, 2022, Pages 29-39]
  • Armaghani, Saber Multi-objective Multi-area Environmental and Economic Dispatch Using Cuckoo Optimization Algorithm [Volume 12, Issue 37, 2014, Pages 89-104]
  • Armaghani, Saber Solving Transmission Expansion Planning problem to Mitigate Cascading Failure Impacts using Transmission Network Vulnerability Analysis and Assessment approach [Volume 17, Issue 58, 2019, Pages 143-157]
  • Armaghani, Saber Real time Vulnerability Assessment in Cascading Failure Analysis Using an Intelligence Monitoring Model [Volume 18, Issue 63, 2020, Pages 97-111]
  • Armaghani, Saber Online Vulnerability Assessment in Cascading Failure Analysis Using an Intelligence Monitoring Model [Volume 22, Issue 77, 2024, Pages 273-290]
  • Armaghani, Saber Fault Detection and Classification in Two -Interconnected AC Microgrid at by Modal and Superimposed Analysis [Volume 22, Issue 79, 2024, Pages 135-152]
  • Arsanjany, Mohammad ali Creating supply chain management strategy map with using causal loop diagram and balanced scorecard [Volume 13, Issue 42, 2015, Pages 151-165]
  • Asad Ayoubi, Peyman Investigation of the layout of kilowatt-scale wind turbines located among megawatt-scale ones by means of an analytical model [Volume 20, Issue 70, 2022, Pages 161-177]
  • Asadi, Bahman Camprarison of different Turbulent Modeling on Rotating Airfoil with Corolios and centrifugal accelaration [Volume 21, Issue 73, 2023, Pages 135-145]
  • Asadi, Elham HD-SEIRS Malware Propagation Model in Heterogeneous Complex Networks [Volume 22, Issue 79, 2024, Pages 17-28]
  • Asadi Amiri, Sekine Provide a method for image preprocessing to improve the performance of JPEG 2000 in image compression [Volume 15, Issue 48, 2017, Pages 247-258]
  • Asadi Gangraj, Ebrahim Developing metaheuristic approaches to solve flow shop scheduling problem with worker assignment [Volume 16, Issue 54, 2018, Pages 283-293]
  • Asgari, Mansour Constitutive Model for Estimating Concrete Strength Using Ultrasonic Test Considering Mixing Ratios [Volume 17, Issue 56, 2019, Pages 367-374]
  • Asgari, Mohsen Optimal Dynamic Manipulation Workspace of a Single Link Robot Manipulator [Volume 16, Issue 54, 2018, Pages 429-441]
  • Asghari, RESPONSE MODIFICATION FACTOR OF SPECIAL STEEL TRUSS MOMENT FRAMES [Volume 11, Issue 32, 2013, Pages 43-56]
  • Asghari, Morteza Numerical simulation and theoretical study on effects of operating parameters in Persian Gulf desalination using vacuum membrane distillation [Volume 16, Issue 55, 2018, Pages 41-49]
  • Asghari Ganji, Amirmohammad Robust Control of Electro Rheological Suspension System Based on LMI Approach [Volume 18, Issue 62, 2020, Pages 153-163]
  • Asgharzadeh-Bonab, Akbar Quality control modeling of manufactured products based on image processing and fuzzy transformation techniques [Volume 21, Issue 72, 2023, Pages 205-219]
  • Ashatri, payam Prediction of dynamic response of fluid in elevated water tanks using artificial neural network model [Volume 15, Issue 48, 2017, Pages 139-150]
  • Ashori, Optimising the Abrasive Water Jet Cutting of Glass Using Artificial Neural Network and Genetic algorithm [Volume 8, Issue 23, 2011, Pages 25-35]
  • Ashory, SCALING OF OPERATIONAL MODE SHAPES USING SENSITIVITY ANALYSIS [Volume 7, Issue 19, 2009, Pages 1-10]
  • Ashory, NUMERICAL AND EXPERIMENTAL CONSIDERATION OF FREQUENCY DOMAIN DECOMPOSITION METHOD FOR MODAL PARAMETERS IDENTIFICATION OF STRUCTURE [Volume 8, Issue 21, 2010, Pages 83-94]
  • Ashory, CORRECTION OF MASS-LOADING EFFECTS OF ACCELEROMETERS ON THE MEASURED FRFs USING OPTIMIZED MASS CHANGE ALGORITHM [Volume 10, Issue 30, 2012, Pages 19-31]
  • Askari, Mojtaba Modeling of x-ray backscatter imaging system using MCNPX code [Volume 20, Issue 71, 2022, Pages 77-86]
  • Askari, Mojtaba Performance Evaluation of Car Cargo Scanner Systems for Determining Linear Attenuation Coefficients of Aluminum Metal Sheets: Modeling [Volume 22, Issue 79, 2024, Pages 121-134]
  • Asyaei, Mohammad Low-Power Register File Design in 90nm CMOS Technology [Volume 16, Issue 54, 2018, Pages 69-81]
  • Ataeepour, Majid EFFICIENCY IMPROVEMENT OF THE SONGUN COPPER MINE FLEET USING SIMULATION TECHNIQUE [Volume 12, Issue 39, 2014, Pages 99-110]
  • Ataei, Mohammad Observed and Un-Observed Covariate Effects on Baseline Hazard Rate - Case study: Jajarm Bauxite Mine [Volume 17, Issue 59, 2019, Pages 225-243]
  • Ataei, Mohammad The Application of Frailty Model in Remaining Useful Life Estimation (Case Study: Sungun Copper Mine's Loading System) [Volume 18, Issue 62, 2020, Pages 129-142]
  • Atashafrooz, Meysam Numerical simulation of laminar forced convection flow with entropy generation analysis in a duct with two expansions - Blocked-off method [Volume 17, Issue 56, 2019, Pages 73-83]
  • Atifeh, Mahmood Reza Design of an Energy Regeneration System for Pressure Reducing Stations of Crude Oil Pipeline [Volume 21, Issue 72, 2023, Pages 31-47]
  • Avokh, Avid Joint Multi-hop Clustering and Routing in VANETs using Array of Doubly Linked List [Volume 19, Issue 67, 2021, Pages 13-32]
  • Ayati, Moosa Modeling and Fault Detection of Quadrotor with Rotor Thrust Deviation Fault [Volume 19, Issue 67, 2021, Pages 245-262]
  • Ayatollahitafti, Vahid VNR_CCP: A New Approach to Congestion Control Using Virtualization Technique and Switch Migration in SDN [Volume 22, Issue 76, 2024, Pages 85-98]
  • Azad darmian, Jamshid Study of the effect of friction rotational damper, viscoelastic and TADAS on the structures seismic behaviour [Volume 17, Issue 59, 2019, Pages 87-107]
  • Azadi, Nooshin EFFICIENCY IMPROVEMENT OF THE SONGUN COPPER MINE FLEET USING SIMULATION TECHNIQUE [Volume 12, Issue 39, 2014, Pages 99-110]
  • Azadi, Saeed Predicting the Groundwater Salinity under Drain Pipes Using Artificial Neural Network [Volume 16, Issue 52, 2018, Pages 203-211]
  • Azadian, Meysam Modeling of VLE and LLE Systems by using Thermodynamic model with ANFIS Structures and GMDH Type-Neural Network [Volume 16, Issue 55, 2018, Pages 19-33]
  • Azarafza, INVESTIGATION OF TEMPERATURE DISTRIBUTION IN THE DISCHARGE MACHINING STEEL P20 [Volume 9, Issue 27, 2011, Pages 73-79]
  • Azarakhsh, Sajad Effect of hole, angle and direction of applied oblique load on crashworthiness parameters of end capped circular tubes: A numerical simulation and experimental study [Volume 20, Issue 68, 2022, Pages 59-71]
  • Azarakhsh, Sajad Crashworthiness investigation of multi-component conical absorber with spherical cap under free inversion process: experimental study and numerical simulation [Volume 21, Issue 73, 2023, Pages 241-253]
  • Azari-far, EFFECTS OF END FORM OF T-JOINT WELDS ON FORMATION OF RESIDUAL STRESSES [Volume 10, Issue 29, 2012, Pages 81-90]
  • Azari Moghaddam, Alireza Providing an expert system with the help of Arithmetic meta-heuristic algorithm to diagnose the infectious disease of covid-19 [Volume 21, Issue 73, 2023, Pages 47-61]
  • Azarkerdar, Mohammad Reza Design and Implementation of Adaptive Parallel Resonant Converter in Variable Tank Parameters [Volume 13, Issue 43, 2016, Pages 129-141]
  • Azhari, Mahdi The effect of hydrogen functionalization on the thermal properties of coiled carbon nanotubes [Volume 21, Issue 74, 2023, Pages 153-162]
  • Azhdary Moghadam, NUMERICAL MODELING OF SECONDARY CURRENT CELLS IN TRAPEZOIDAL CHANNELS WITH UNIFORM ROUGHNESS [Volume 8, Issue 20, 2010, Pages 57-70]
  • Azhdary Moghaddam, GEOMETRY OPTIMIZATION OF TRIANGLE LABYRINTH SPILLWAY USING ANFIS MODELS AND GENETIC ALGORITHMS [Volume 7, Issue 19, 2009, Pages 57-68]
  • Azhdary Moghaddam, Mehdi Probabilistic Investigation of Cavitation Occurrence on Morning-Glory Spillways Using Numerical Modeling and Response Surface Method [Volume 22, Issue 78, 2024, Pages 201-216]
  • Azimi, Ali Demand forecasting in a Supply Chain using Machine Learning Algorithms [Volume 13, Issue 41, 2015, Pages 127-136]
  • Azimi, Aziz Investigate on Non-Fourier Heat Conduction in Sand Using Models based on Fractional Calculus [Volume 15, Issue 48, 2017, Pages 15-22]
  • Azimi, Neda CFD simulation of the effect of magnetic field on convective heat transfer and ferrofluid flow inside a pipe [Volume 20, Issue 69, 2022, Pages 155-166]
  • Azimian, AhmadReza Numerical simulation of convective heat transfer in a turbulant non-Newtonian nanofluid flow through a horizontal circular tube [Volume 16, Issue 53, 2018, Pages 113-120]
  • Azimzadeh Irani, Arash Segmentation of Corridor Images for Structure Based Robot Navigation [Volume 20, Issue 70, 2022, Pages 225-241]
  • Azizian, Gholamreza Probabilistic Investigation of Cavitation Occurrence on Morning-Glory Spillways Using Numerical Modeling and Response Surface Method [Volume 22, Issue 78, 2024, Pages 201-216]
  • Azizollah Ganji, Bahram Design of MEMS Frog shape Microphone with High Sensitivity and low voltage using PSO Algorithm [Volume 17, Issue 59, 2019, Pages 141-151]

B

  • Babaee Tirkolaee, Erfan Solving the multi-trip vehicle routing problem with time windows in urban waste management using grey wolf optimization algorithm [Volume 17, Issue 57, 2019, Pages 93-110]
  • Babaei, Ebrahim A New Method of Modeling for Cuk Converter Based on Signal Flow Graph Approach and its Control by using a Mixed Sensitivity Type Robust Technique [Volume 15, Issue 51, 2017, Pages 275-288]
  • Babaei, Mehdi Multi-Objective Optimization of Reinforced Concrete Frames using Genetic Algorithm and Weighted Sum Method [Volume 16, Issue 52, 2018, Pages 193-201]
  • Babaei, Mohsen Experimental study and empirical modeling of lithium ion battery lifetime [Volume 16, Issue 55, 2018, Pages 35-40]
  • Babaei tooski, Shoaib Improving Performance of Germanium-Based Vertical Tunneling Field Effect Transistor Using GaAs as Channel [Volume 22, Issue 76, 2024, Pages 115-122]
  • Babaie rabiee, Marzie An investigation on the pressure drop of the particulate flow through fibrous filters using Lattice Boltzmann method [Volume 14, Issue 47, 2016, Pages 267-278]
  • Babaiyan, Vahide Script independent offline writer identification from handwriting samples based on texture using wavelet transform in Persian-English languages [Volume 18, Issue 63, 2020, Pages 1-13]
  • Badamchizadeh, Parastoo Modeling the size of hydrophilic nanoparticles during fluidization with emphasis on the role of vapor of polar materials [Volume 16, Issue 52, 2018, Pages 383-395]
  • Bafandeh, Bahareh The Quantitative Measurement of Software Components Reusability: Methods, Applications, Challenges [Volume 14, Issue 46, 2016, Pages 97-122]
  • Baghaee, AERO-HYDRO-ELASTIC SIMULATION OF TENSION LEG PLATFORM WIND TURBINE [Volume 10, Issue 30, 2012, Pages 1-17]
  • Baghaei, Hannaneh Planning of Fast Charging Station for Electric Vehicles Equipped With Renewable Energy Sources and Energy Storage System Considering Economic and Environmental Objectives [Volume 22, Issue 77, 2024, Pages 245-259]
  • Baghani, Mostafa Study of healing effect on mechanical behavior of a smart asphalt pavement and permanent deformations due to a moving load in the framework of finite element analysis [Volume 17, Issue 57, 2019, Pages 253-264]
  • Baghayipour, Mohammadreza An Experimental Model for Extraction of the Natural Frequencies influencing on the Acoustic Noise of Synchronous Motors [Volume 16, Issue 53, 2018, Pages 231-242]
  • Baghayipour, Mohammadreza Design and Construction of a Double-sided Axial-flux Induction Motor with Separate Stator Teeth [Volume 19, Issue 67, 2021, Pages 109-117]
  • Baghbani, Fahime Observer-based adaptive emotional controller for a class of uncertain nonlinear systems [Volume 21, Issue 74, 2023, Pages 37-49]
  • Baghban Salehi, Mahsa Modeling the gelation time of sulfonated polyacrylamide/chromium triacetate hydrogel based on screening of the effective parameters [Volume 13, Issue 41, 2015, Pages 159-172]
  • Bagheri, MODELING OF THRUST AND SPECIFIC FUEL CONSUMPTION FOR A TURBOFAN ENGINE VIA GMDH-TYPE NEURAL NETWORKS [Volume 10, Issue 28, 2012, Pages 1-7]
  • Bagheri, Ali Modeling the interaction of water resources and value added in the Birjand Plain [Volume 16, Issue 55, 2018, Pages 279-298]
  • Bagheri, Sajad Optimum Design of Corona Ring of Composite Insulators Considering the Effect of Mutual Phases by Monte Carlo and Coordinate Search Intelligente Algorithms [Volume 22, Issue 77, 2024, Pages 189-206]
  • Bagheri-Esfe, Hamed High order modeling of shocks and disturbances in compressible flows using WENO scheme [Volume 21, Issue 73, 2023, Pages 263-277]
  • Bagheri pourasil, Meysam Progressive collapse analysis methods due to blast loading in steel moment frames [Volume 15, Issue 51, 2017, Pages 51-65]
  • Bagheri Ramiani, Masoud Developing a model for predicting the number of freight accidents involving death and injury Using Genetic Planning [Volume 18, Issue 61, 2020, Pages 49-62]
  • Bagher rad, Naeeme Supplier selection using the hybrid fuzzy ANP-DEMATE-VIKOR approach [Volume 18, Issue 60, 2020, Pages 87-105]
  • Bagherzadeh, Fahimeh Deepfake image detection using a deep hybrid convolutional neural network [Volume 21, Issue 75, 2023, Pages 19-28]
  • Bahador, Hamid A new highly sensitive refractive index sensor using vertically coupled plasmonic elliptic-disk up elliptic-ring nanostructure [Volume 19, Issue 64, 2021, Pages 64-75]
  • Bahadori, Fatemeh Evaluation of pollutants and greenhouse emissions using gasoline-ethanol blends in gasoline engines [Volume 17, Issue 59, 2019, Pages 255-262]
  • Bahadori, Hadi Determining Hardening Soil Model Parameters of Urmia Lake Sand by Numerical Modeling of Undrained Triaxial Test and Comparison with Laboratory Results [Volume 22, Issue 78, 2024, Pages 171-183]
  • Bahadori, Niloofar Directional Microstrip Antenna by using Metamaterial Superstrate in Fabry-Perot Cavity [Volume 13, Issue 42, 2015, Pages 17-25]
  • Bahoosh, Mohsen Modeling of an Industrial Incinerator for Refinery Wastes and Investigating the Effective Parameters for Performance Improvement [Volume 22, Issue 78, 2024, Pages 103-122]
  • Bahrami, Ahmad Estimation of flow temperature in horizontal pipe using analytical inverse heat transfer [Volume 18, Issue 61, 2020, Pages 1-12]
  • Bahrani Khademi, saeed Optimization of MLP Neural Network Using the FinGrain Parallel Genetic Algorithm for Breast Cancer Diagnosis [Volume 17, Issue 57, 2019, Pages 173-186]
  • Bahri, abas Investigation of main frame performance of 2 MW wind turbine using finite element method [Volume 20, Issue 71, 2022, Pages 27-41]
  • Bakhshi, ESTIMATION OF PEAK GROUND ACCELERATION, VELOCITY AND DISPLACEMENT USING ARTIFICIAL NEURAL NETWORK [Volume 7, Issue 19, 2009, Pages 11-21]
  • Bakhshi, Naser Numerical Study on the Effects of Extended Surfaces on the Performance of a Coaxial Geothermal Heat Exchanger [Volume 22, Issue 76, 2024, Pages 167-175]
  • Balafar, Mohammadali Query expansion using the clustering of pseudo relevant documents with query sensitive similarity [Volume 14, Issue 47, 2016, Pages 243-254]
  • Baneshi, Alireza Designing an Incentive Mechanism to Reward Users for Advertising Content Usage Considering Network Effects [Volume 22, Issue 78, 2024, Pages 259-273]
  • Baniassadi, Majid The effect of hydrogen functionalization on the thermal properties of coiled carbon nanotubes [Volume 21, Issue 74, 2023, Pages 153-162]
  • Banirostam, Touraj A hybrid method for community detection based on user interactions, topology and frequent pattern mining [Volume 21, Issue 75, 2023, Pages 129-145]
  • Banisi4, Samad An Investigation into the Relationships Determining Ball Trajectory in Mills by Using the Physical Modelling [Volume 17, Issue 58, 2019, Pages 203-214]
  • Bannae Sharifian, Mohammad Bagher A New Method of Modeling for Cuk Converter Based on Signal Flow Graph Approach and its Control by using a Mixed Sensitivity Type Robust Technique [Volume 15, Issue 51, 2017, Pages 275-288]
  • Barabadi, Abbas The Application of Frailty Model in Remaining Useful Life Estimation (Case Study: Sungun Copper Mine's Loading System) [Volume 18, Issue 62, 2020, Pages 129-142]
  • Barabadi, Reza Observed and Un-Observed Covariate Effects on Baseline Hazard Rate - Case study: Jajarm Bauxite Mine [Volume 17, Issue 59, 2019, Pages 225-243]
  • Baradaran, Vahid Development of a dynamic game theory model for analyzing competition in the oligopoly markets (Feedback Approach) [Volume 17, Issue 59, 2019, Pages 263-276]
  • Baradaran Kazemzadeh, Reza Developing a Mathematical Model for Determination of Asset Management Strategy Based on Maintenance and Procurement Factors [Volume 15, Issue 51, 2017, Pages 1-13]
  • Baradaran Kazemzadeh, Reza Robust optimization of a discrete time-cost-environment trade-off problem by considering uncertainty in time and cost [Volume 17, Issue 58, 2019, Pages 215-232]
  • Bararnia, Effect of pounding in seismic demand of seismic isolated structures [Volume 9, Issue 24, 2011, Pages 53-64]
  • Barforoushi, Taghi Risk-constrained transmission network expansion planning in competitive electricity markets considering expected energy not supplied and wind curtailment [Volume 20, Issue 70, 2022, Pages 209-223]
  • Barkhordari, ESTIMATION OF PEAK GROUND ACCELERATION, VELOCITY AND DISPLACEMENT USING ARTIFICIAL NEURAL NETWORK [Volume 7, Issue 19, 2009, Pages 11-21]
  • Baseri, hadi MATHEMATICAL MODELING FOR RAPID EXPANSION OF SUPERCRITICAL SOLUTION TO PRODUCE NANO AND MICRO NABUTEMON PARTICLES [Volume 11, Issue 35, 2013, Pages 25-38]
  • Baseri, Hadi Experimental investigation and numerical modeling of carbon dioxide desorption from activated carbon vessel by using of finite elements method [Volume 16, Issue 52, 2018, Pages 363-371]
  • Bashipour, Fatemeh Sensitivity analysis and uncertainty of density correction factor of natural gas based on the AGA8-standard modeling to operational and environmental parameters [Volume 17, Issue 57, 2019, Pages 42-54]
  • Bashiri, Mahdi the nested hierarchical p-center modeling & solving with PSO algorithm [Volume 14, Issue 47, 2016, Pages 187-197]
  • Bashirpour, Mohammad Infrared thin film photodetector performance improvement using plasmonic nanostructure and ring shape lens [Volume 20, Issue 68, 2022, Pages 225-232]
  • Basirat, Ruhollah Numerical Analysis of the Segmental Supporting System Under Earthquake Loading [Volume 16, Issue 54, 2018, Pages 177-187]
  • Basirat, shamsa Application of Euler- Euler method in estimation of maximum depth of local scour [Volume 15, Issue 51, 2017, Pages 289-298]
  • Batalebluie, reza Study of The effect of thickness and initial geometric imperfection of cylindrical composite shell on the buckling behavior in axial pressure [Volume 16, Issue 53, 2018, Pages 121-134]
  • Batalebluie, reza Numerical and Experimental Study of Reinforced Composite Vessels with Hoop Stiffeners under External Hydrostatic Pressure [Volume 16, Issue 54, 2018, Pages 339-349]
  • Bathaee, S.M.T Modeling and simulation of Energy managements for fuel cell hybrid vehicle [Volume 15, Issue 50, 2017, Pages 1-16]
  • Bavandi, Salim Maximum Flow Interdiction Problem in Multi-Period Dynamic Networks in Fuzzy Stochastic Hybrid Conditions [Volume 21, Issue 72, 2023, Pages 221-233]
  • Bayat, Mehdi Dynamic optimization of acetylene hydrogenation reactors with considering catalyst deactivation [Volume 20, Issue 69, 2022, Pages 71-80]
  • Bayat, Reza Vibration control of laminated composite beam with magnetostrictive layers [Volume 15, Issue 48, 2017, Pages 1-13]
  • Bayati, Hassan Investigate on Non-Fourier Heat Conduction in Sand Using Models based on Fractional Calculus [Volume 15, Issue 48, 2017, Pages 15-22]
  • Bazazzadeh, Mehradad OPTIMIZED CONTROLLER DESIGN FOR A BLOWDOWN SUPERSONIC WIND TUNNEL BY USING GENETIC ALGORITHM [Volume 14, Issue 47, 2016, Pages 155-169]
  • Beheshtinia, Mohammad Ali Evaluating flexible job shop algorithms and comparison with 2 part genetic algorithm [Volume 13, Issue 40, 2015, Pages 1-16]
  • Beheshtinia, Mohammad Ali Simulation and technical- economic analysis of solar water heater for residential users [Volume 13, Issue 43, 2016, Pages 107-119]
  • Beheshtinia, Mohammad Ali A Combination of Fuzzy AHP and TOPSIS Method for the Supplier Selection Problem (Case Study: Advertising Company) [Volume 15, Issue 48, 2017, Pages 217-229]
  • Beheshtinia, Mohammad Ali Modeling the process of services quality increasing using QFD, AHP and Knapsack problem with fuzzy approach (A case study: police services) [Volume 15, Issue 51, 2017, Pages 67-84]
  • Beheshtinia, Mohammad Ali Presenting a model for production and transportation scheduling in automotive industry (a case study: Iran Khodro) [Volume 16, Issue 52, 2018, Pages 299-309]
  • Beheshti nIa, Mohammad Ali A Mathematical Model for optimization of Product Development Process [Volume 14, Issue 45, 2016, Pages 111-121]
  • Behin, Jamshid Modeling of nitrogen release in urea-modified lignin matrix [Volume 18, Issue 60, 2020, Pages 1-11]
  • Behkam Kia, Daniel Exact uncertainty analysis of the bridge dynamic response during random vehicle crossing by statistical methods [Volume 14, Issue 47, 2016, Pages 77-93]
  • Behnamian, Javad Supplier selection using the hybrid fuzzy ANP-DEMATE-VIKOR approach [Volume 18, Issue 60, 2020, Pages 87-105]
  • Behnam rad, Golsa Subset Simulation Method in Active Structural Control [Volume 16, Issue 53, 2018, Pages 279-288]
  • Behniafar, Ali Design and Construction of a Double-sided Axial-flux Induction Motor with Separate Stator Teeth [Volume 19, Issue 67, 2021, Pages 109-117]
  • Behrooz sarand, Alireza Performance modeling of nano structure graphene membrane for hydrogen separation using CFD methods [Volume 16, Issue 55, 2018, Pages 77-86]
  • Beigi-Harchegani, Maryam Numerical Study of Heat Transfer and Pressure Drop in Forced-convection Nanofluid flow through an internally ribbed pipe [Volume 15, Issue 49, 2017, Pages 65-76]
  • Beigzadeh, AmirMohammad Modeling of x-ray backscatter imaging system using MCNPX code [Volume 20, Issue 71, 2022, Pages 77-86]
  • Beigzadeh, Amir Mohammad Performance Evaluation of Car Cargo Scanner Systems for Determining Linear Attenuation Coefficients of Aluminum Metal Sheets: Modeling [Volume 22, Issue 79, 2024, Pages 121-134]
  • Beigzadeh, Reza Heat transfer enhancement in micro heat exchangers using genetic algorithm based multi-objective optimization [Volume 17, Issue 59, 2019, Pages 25-34]
  • Beiki, Hossein Numerical investigation on effect of silica nanoparticles on the middle layer of salt gradient solar ponds [Volume 15, Issue 50, 2017, Pages 49-61]
  • Beiki, Hossein CFD Investigation on Nanofluids Convective Heat Transfer in a Duct Containing Spherical Surfaces [Volume 16, Issue 52, 2018, Pages 347-361]
  • Beytolahi Tavakoli, Ahmad Simulation of the Behavior of Non-Newtonian Fluids Dissolved in Water Inside Non-Concentric Rotating Cylinders [Volume 22, Issue 77, 2024, Pages 13-24]
  • Bibak, hadis Prediction of optimal mixing design for stabilized soft clay soil using Artificial Neural Networks [Volume 17, Issue 57, 2019, Pages 147-158]
  • Bidar, Bahareh Modeling of an Industrial Incinerator for Refinery Wastes and Investigating the Effective Parameters for Performance Improvement [Volume 22, Issue 78, 2024, Pages 103-122]
  • Bigdeli, Hamid A meta-heuristic method for maximum capacity path interdiction problem with multiple attackers [Volume 20, Issue 70, 2022, Pages 133-146]
  • Bigdeli, Hamid Maximum Flow Interdiction Problem in Multi-Period Dynamic Networks in Fuzzy Stochastic Hybrid Conditions [Volume 21, Issue 72, 2023, Pages 221-233]
  • Bigdeli, Nooshin A New Capsule Generative Adversarial Network for Imbalanced Classification of Human Sperm Images [Volume 21, Issue 73, 2023, Pages 279-294]
  • Biglari, Mojtaba Modeling Growth of A Vapor Film Formed in Contact between Hot Metallic Sphere and Water in The Pressure Vessels [Volume 13, Issue 40, 2015, Pages 89-101]
  • Binabaji, Yusuf Numerical analysis of the effects of gravitational acceleration on aerosol deposition in the human trachea-bronchial airways: A 3D Computational Simulation [Volume 17, Issue 59, 2019, Pages 109-128]
  • Bolouki Speily, omid reza Modeling Users’ Repost Behavior in Online Communities Using a Team of Learning Automata [Volume 17, Issue 59, 2019, Pages 195-214]
  • Bonakdari, DESIGN AND IMPLEMENTATION OF AN IDSS CONFLICT RESOLVER USING DIFFERENT VIEW POINTS [Volume 8, Issue 22, 2010, Pages 1-12]
  • Borhani, Ehsan Manufacturing and analysis of dynamic and mechanical properties of rigid nanocomposite polyurethane foam reinforced by nano particles of SiC [Volume 16, Issue 53, 2018, Pages 1-7]
  • Boyer Hassani, Omid Development of a multi-objective mathematical model for sustainable diet planning of athletes [Volume 18, Issue 63, 2020, Pages 73-84]
  • Bozorgnezhad, Fatemeh Developing metaheuristic approaches to solve flow shop scheduling problem with worker assignment [Volume 16, Issue 54, 2018, Pages 283-293]
  • Brenjkar, Ehsan Evaluation of the performance of artificial neural networks integrated with whale optimization and ant colony optimization algorithms in estimating the drilling rate of penetration and compare with simple neural networks and mathematical conventional models [Volume 19, Issue 65, 2021, Pages 115-135]

C

  • Chahardoli, Saber Experimental and numerical investigation of hole and edge radius effect on collapse properties of cylindrical absorbers under axial impact loading [Volume 16, Issue 53, 2018, Pages 53-65]
  • Chaharsooghi, A COORDINATION MODEL FOR A COMPETITIVE SUPPLY CHAIN USING COOPERATIVE AND NON-COOPERATIVE GAME THEORY [Volume 10, Issue 29, 2012, Pages 19-31]
  • Chaharsooghi, Kamal Impact of information system flow on make-to-order manufacturer supply chain network: systems dynamics approach [Volume 8, Issue 22, 2010, Pages 21-35]
  • Chaharsooghi, Kamal Integration of physical and financial decisions in value-based supply chain [Volume 16, Issue 54, 2018, Pages 227-239]
  • Chaharsooghi, Seyed kamal A reliable closed-loop supply chain network design under uncertainty: A case study of a lead-acid battery manufacturer [Volume 12, Issue 39, 2014, Pages 45-60]
  • Chaharsooghi, Seyed Kamal Developing a Negotiation Mechanism for Multi-Agent Systems in Automated Electronic Exchange: based on analytical methods of consumer behavior in microeconomics [Volume 14, Issue 46, 2016, Pages 87-95]
  • Chaharsooghi, S. Kamal A Bi-Level Programming Model for Closed-Loop Supply Chain Network Design with Competition between two chains in Uncertain Environment: A Benders Decomposition Solution [Volume 15, Issue 49, 2017, Pages 201-215]
  • Chakeri, Hamid Investigation of interaction Between Tabriz metro tunnels (lines 1, 2 and 3) [Volume 17, Issue 58, 2019, Pages 41-53]
  • Chehreghani, Sajjad Assessment of the dilution controlling factor in the production scheduling of mines [Volume 19, Issue 65, 2021, Pages 53-62]
  • Cheraghi, Zahedeh Pricing and Cooperation in advertisment in a two levels supply chain using game thory [Volume 13, Issue 42, 2015, Pages 135-149]
  • Chitsaz, EXPERIMENTAL INVESTIGATION OF THE TRANSIENT JET EMANATING FROM THE PROTOTYPE DIRECT GASEOUS INJECTOR [Volume 9, Issue 25, 2011, Pages 21-31]

D

  • D, A Numerical investigation of counter flow polymer exchange membrane fuel cell with two channel [Volume 16, Issue 53, 2018, Pages 39-51]
  • Dadashzadeh, Noushin Synthesis and characterization of hydrophobised magnetite nanoparticles for production of liquid marbles and modeling of liquid marble deformation under the gravity effect [Volume 21, Issue 75, 2023, Pages 53-66]
  • Dadvand Koohi, Ahmad Modeling the gelation time of sulfonated polyacrylamide/chromium triacetate hydrogel based on screening of the effective parameters [Volume 13, Issue 41, 2015, Pages 159-172]
  • Daeijavad, Shohre Modeling and evaluation of Massey Ferguson tractor seat using finite element method [Volume 16, Issue 53, 2018, Pages 269-278]
  • Daghbandan, allahyar Modeling of VLE and LLE Systems by using Thermodynamic model with ANFIS Structures and GMDH Type-Neural Network [Volume 16, Issue 55, 2018, Pages 19-33]
  • Daghighi, Kourosh Numerical study of the flow and heat transfer due to the changing of the burner angle in a П-type boiler [Volume 18, Issue 61, 2020, Pages 139-149]
  • Damghani noori, Mohammad Experimental study of nanoparticles effect on the energy absorption of cylindrical nanocomposites in quasi-static axial loading [Volume 21, Issue 72, 2023, Pages 159-174]
  • Damghani Nouri, ANALYTICAL SOLTION AND SIMULATION OF DYNAMIC STRESS INTENSITY FACTOR AND STRESS FILED DETERMINATION ON THE CRACKED PLATE UNDER BLAST LOADING [Volume 10, Issue 29, 2012, Pages 71-80]
  • Damghani Nouri, ANALYTICAL SOLTION AND SIMULATION OF DYNAMIC STRESS INTENSITY FACTOR AND STRESS FILED DETERMINATION ON THE CRACKED PLATE UNDER BLAST LOADING [Volume 10, Issue 29, 2012, Pages 71-80]
  • Damghani Nouri, Mohammad The Effect of Rise Time in Dynamic Stress Intensity Factor for Impact Loading [Volume 13, Issue 40, 2015, Pages 79-87]
  • Damghani Nouri, Mohammad Experimental and numerical investigation of energy absorption of foam-filled cylindrical tubes with initiator [Volume 14, Issue 44, 2016, Pages 69-78]
  • Dana, Arash Introduction of the structure, modeling and analysis of junctionless heterostructure Si/Si1-xGex transistor [Volume 21, Issue 72, 2023, Pages 109-121]
  • Daneshpour, Negin An Improved two-layer Model in the Logical Level Data Warehouse Designing [Volume 16, Issue 54, 2018, Pages 21-37]
  • Daneshpour, Negin View Maintenance Expression Improvement in Data Warehouses [Volume 16, Issue 55, 2018, Pages 101-111]
  • Darabi, Ahmad An Experimental Model for Extraction of the Natural Frequencies influencing on the Acoustic Noise of Synchronous Motors [Volume 16, Issue 53, 2018, Pages 231-242]
  • Darabi, Ahmad Design and construction of a rotor for switched reluctance motor to improve torque profile [Volume 19, Issue 67, 2021, Pages 73-83]
  • Darabi, Ahmad Design, Modeling and Optimization of a High-speed Permanent Magnet Synchronous Machine with Retention Sleeve of Rotor using Taguchi Optimization Method [Volume 21, Issue 75, 2023, Pages 161-179]
  • Darabi, S. SIX-PHASE LINEAR SWITCHED RELUCTANCE MOTOR DRIVE FOR ELEVATOR [Volume 12, Issue 36, 2014, Pages 53-63]
  • Darande, M. DYNAMIC ANALYSIS OF SATELLITE SEPARATION USING RETRO ROCKET FOR INJECTION WITH INITIAL ROTATION IN ORBIT [Volume 12, Issue 36, 2014, Pages 17-27]
  • Darvishi, Parviz A three-dimensional model for evaluating the performance of proton exchange membrane fuel cell to reduce the waste of hydrogen [Volume 16, Issue 55, 2018, Pages 51-61]
  • Daryabor, MODELING OF NONDESTRUCTIVE ULTRASONIC TEST OF BONDING BETWEEN ALUMINUM AND COMPOSITE USING FEM [Volume 9, Issue 26, 2011, Pages 1-12]
  • Dashtbayazi, STATISTICAL MODELING OF SYNTHESIZING OF ALUMINUM BASED NANOCOMPSOITE PARTICLES REINFORCED BY SiC VIA MECHANICAL ALLOYING PROCESS [Volume 10, Issue 29, 2012, Pages 43-60]
  • DASHTI, HADI The effect of the friction pendulum isolation system on the seismic response of structures located on different types of soils [Volume 20, Issue 68, 2022, Pages 1-14]
  • Dashti Gohari, Pedram The surface stress effects on linear vibration of nonlocal triple-walled boron nitride nano tube conveying viscose fluid flow using DQM [Volume 13, Issue 43, 2016, Pages 47-66]
  • Dastfan, Ali An Experimental Model for Extraction of the Natural Frequencies influencing on the Acoustic Noise of Synchronous Motors [Volume 16, Issue 53, 2018, Pages 231-242]
  • Dastgiri, Armineh A Transformerless High Step-up DC-DC Converter Based on Active Switched Capacitor Network [Volume 19, Issue 66, 2021, Pages 23-36]
  • Dastigerdi, sayyed hossein Evaluation of collapse potential of silty sandy soil stabilized with microsilica, bentonite and rice husk ash [Volume 13, Issue 42, 2015, Pages 87-101]
  • Dastourani, Hadi Aerodynamic analysis of potential flow over blended-wing-body (BWB) aircraft [Volume 14, Issue 47, 2016, Pages 127-140]
  • Davoodbeygi, Yegane Adjustment of Optimal Parameters to Control the Temperature in Different Conductors [Volume 22, Issue 77, 2024, Pages 107-116]
  • Davoodi, Evaluation of Behavior of a Ball Joint System in a Double Layer Grid through Updating of its Natural Frequencies [Volume 8, Issue 23, 2011, Pages 61-78]
  • Dehdashti Jahromi, hamed Modelling of All-optical 3-inputs XOR logical gates using artificial neural networks [Volume 20, Issue 70, 2022, Pages 147-159]
  • Dehestani, REINFORCEMENT OPTIMIZATION IN UNSTABLE ROCK SLOPES BY USING THE METHOD OF REINFORCEMENT OF REQUIRED LEVEL [Volume 8, Issue 21, 2010, Pages 15-32]
  • Dehestani, Pouya Study of The effect of thickness and initial geometric imperfection of cylindrical composite shell on the buckling behavior in axial pressure [Volume 16, Issue 53, 2018, Pages 121-134]
  • Dehghan, SIMULATION AND INVESTIGATION OF RING COMPRESSION TEST FOR FRICTION MEASURMENT IN HOT FORGING PROCESS [Volume 10, Issue 31, 2012, Pages 59-67]
  • Dehghan, M. NUMERCIAL FORMULATION AND SIMULATION OF A NON-NEWTONIAN MAGNETIC FLUID FLOW IN THE BOUNDARY LAYER OF A STRETCHING SHEET [Volume 11, Issue 34, 2013, Pages 77-85]
  • Dehghan, Maziar Investigation of the forced convection heat transfer in the presence of radiation in metal foams using HPM [Volume 14, Issue 46, 2016, Pages 1-9]
  • Dehghan, Maziar Porous-filled helical double-pipe heat exchanger under asymmetric heat flux [Volume 16, Issue 52, 2018, Pages 409-418]
  • Dehghan, Maziar Techno-economic evaluation of using ice storage systems based on the new requirements of the draft of the fourth edition of the National Building Regulations, Article 19 [Volume 18, Issue 63, 2020, Pages 65-72]
  • Dehghan, Sajjad A Multi-task Model to Detect Saliency and Edge using Hybrid Cost Function [Volume 20, Issue 71, 2022, Pages 151-163]
  • Dehghan, Shahab Multiyear Non-Deterministic Power System Expansion Planning Considering Wind ‎Farms Using a Hybrid Combination of Stochastic ‎Programming and Minimax Regret Criterion [Volume 14, Issue 47, 2016, Pages 41-50]
  • Dehghan Manshadi, PREDICTION AND ANALYSIS OF EXPERIMENTAL RESULTS OF HOT WIRE ANEMOMETRY BY USING OF NEURAL NETWORK [Volume 8, Issue 20, 2010, Pages 83-92]
  • Dehghan Manshadi, Mojtaba High order modeling of shocks and disturbances in compressible flows using WENO scheme [Volume 21, Issue 73, 2023, Pages 263-277]
  • Dehghan Manshadi, Mojtaba Numerical Simulation of Fluid Flow with Real Viscosity in a Centrifugal Pump by SPH Method [Volume 21, Issue 73, 2023, Pages 119-133]
  • Dehghan Manshadi, mojtabah OPTIMIZED CONTROLLER DESIGN FOR A BLOWDOWN SUPERSONIC WIND TUNNEL BY USING GENETIC ALGORITHM [Volume 14, Issue 47, 2016, Pages 155-169]
  • Dehlaghi, Vahab Laboratory modeling of heat transfer system of radiology tube using multi-walled carbon nanofluid and evaluation of heat transfer coefficient [Volume 12, Issue 38, 2014, Pages 45-58]
  • Dehnad, Mohamad Hosein Using the integrated passenger and vehicle simulation in evaluation of subway scheduling strategies (Case study of line one- Tehran subway) [Volume 19, Issue 66, 2021, Pages 121-129]
  • Dehnad, Mohamad Hosein Evaluation of safety, traffic and economic indicators of traffic calming measures using software simulation (case study: Qom city) [Volume 21, Issue 75, 2023, Pages 285-295]
  • Delalat, Meysam Design, construction, modeling and estimation of the second stage linear model of laboratory drone with cold gas thrusters based on genetic algorithm [Volume 22, Issue 77, 2024, Pages 1-12]
  • Derafshian Maram, Mehdi Prevention of Transient and Voltage Instabilities Using A Remedial Action Scheme Based On Generation Shedding and Load Cut [Volume 14, Issue 46, 2016, Pages 137-150]
  • Deypir, Mahmood A New Meta-Heuristic Algorithm Based on Tabu Search for the Job Scheduling Problem in a Fog-Cloud system [Volume 18, Issue 62, 2020, Pages 13-29]
  • Deypir, Mahmood Provide a method for recognizing trust in social networks according to individual and personal characteristics using a compatible neural-fuzzy inference system method [Volume 21, Issue 75, 2023, Pages 115-127]
  • Deypir, Mahmood Provide a Solution Based on Teacher and Student Learning Algorithm to Reduce Regression Test Cases [Volume 22, Issue 78, 2024, Pages 1-15]
  • Dideban, abbas ELECTRICAL CIRCUIT MODELLING WITH PETRI NET BY USING OF CONTROL ARCS [Volume 11, Issue 35, 2013, Pages 39-47]
  • Dideban, Abbas A novel control strategy for solar-wind hybrid energy systems based on optimal battery charge and discharge limits in various time domain [Volume 16, Issue 55, 2018, Pages 163-173]
  • Djavareshkian, Mohammad Hasan Aerodynamic analysis of potential flow over blended-wing-body (BWB) aircraft [Volume 14, Issue 47, 2016, Pages 127-140]
  • Doai, SIMULATION AND INVESTIGATION OF RING COMPRESSION TEST FOR FRICTION MEASURMENT IN HOT FORGING PROCESS [Volume 10, Issue 31, 2012, Pages 59-67]
  • Dolatali Zadeh, M. DEVELOPING A MODEL TO PREDICT THE PULSE DURATION OF TENSILE RESPONSE AT THE BOTTOM OF ASPHALT LAYER [Volume 11, Issue 33, 2013, Pages 83-98]
  • Dolati, Hadi A Modified Single-Phase Single-Stage Boost Inverter [Volume 22, Issue 76, 2024, Pages 13-26]
  • Dolatnejad, Azam A Hybrid Modified Ant Colony for Solving the Capacitated Open Vehicle Routing Problem [Volume 15, Issue 50, 2017, Pages 179-191]
  • Domiri Ganji, Davood Investigation of the forced convection heat transfer in the presence of radiation in metal foams using HPM [Volume 14, Issue 46, 2016, Pages 1-9]
  • Doostmohammadian, Mohammadreza Epidemic Modeling and Flattening the Infection Curve in Social Networks [Volume 22, Issue 76, 2024, Pages 155-165]
  • Doostmohammadian, Najmeh Epidemic Modeling and Flattening the Infection Curve in Social Networks [Volume 22, Issue 76, 2024, Pages 155-165]
  • Doralizadeh, Mohammad Masab Modeling and analysis of nonlinear Oscillations of atomic force microscopy in liquid environment [Volume 15, Issue 51, 2017, Pages 209-224]
  • Doustmohamadian, Soraya Epidemic Modeling and Flattening the Infection Curve in Social Networks [Volume 22, Issue 76, 2024, Pages 155-165]
  • Doustmohammadian, Azam Epidemic Modeling and Flattening the Infection Curve in Social Networks [Volume 22, Issue 76, 2024, Pages 155-165]

E

  • Ebadi jamkhaneh, Mahdi Effects of beech and eucalyptus sawdust as a supplementary material to improve the performance of composite panel [Volume 16, Issue 53, 2018, Pages 259-267]
  • Ebadollahi, Mohammad Thermodynamic and Exergoeconomic Study of an Absorption-Compression Refrigeration Cycle Driven by a Geothermal Energy Resource [Volume 22, Issue 78, 2024, Pages 59-77]
  • Ebnodin, SHAPE OPTIMIZATION OF SUPERSONIC WIND TUNNEL DIFFUSER USING GENETIC ALGORITHM [Volume 10, Issue 28, 2012, Pages 19-29]
  • Ebrahimi, NUMERICAL MODELING OF FLOW AROUND CATAMARAN VESSEL AND CALCULATION OF HYRODYNAMIC RESISTANCE BY COMPUTATIONAL FLUID DYNAMICS [Volume 11, Issue 32, 2013, Pages 29-41]
  • Ebrahimi, Ali Localization in IoT by using Fractional Order Chaotic Particle Swarm Algorithm Optimization [Volume 18, Issue 60, 2020, Pages 157-168]
  • Ebrahimi, Alireza A novel control strategy for solar-wind hybrid energy systems based on optimal battery charge and discharge limits in various time domain [Volume 16, Issue 55, 2018, Pages 163-173]
  • Ebrahimi, Emad A Low Power CMOS UWB LNA with Sub-1V Supply Voltage and Noise Cancellation Technique [Volume 22, Issue 77, 2024, Pages 207-220]
  • Ebrahimi, Faezeh Providing an expert system with the help of Arithmetic meta-heuristic algorithm to diagnose the infectious disease of covid-19 [Volume 21, Issue 73, 2023, Pages 47-61]
  • Ebrahimi, Kazem Using Discrete Markov Chain Model for Predicting the Behavior of Banks Loan Portfolios [Volume 14, Issue 47, 2016, Pages 61-76]
  • Ebrahimi, Mohamadjavad Simulation of the Behavior of Non-Newtonian Fluids Dissolved in Water Inside Non-Concentric Rotating Cylinders [Volume 22, Issue 77, 2024, Pages 13-24]
  • Ebrahimi, Reza Nonlinear analysis of coupled transversal-longitudinal vibration in electrostatically actuated nanoresonators [Volume 20, Issue 70, 2022, Pages 51-60]
  • Ebrahimi, Saeed Analytical solution of nonlinear rolling motion of ship using the method of multiple scales [Volume 15, Issue 49, 2017, Pages 125-137]
  • Ebrahimi, Seyed Hossein A Mathematical Model to Optimize the Operation of a Gas Distribution Network [Volume 14, Issue 44, 2016, Pages 93-104]
  • Ebrahimian, Comparing the results of dynamic analysis (maximum displacement) with approximate method of Iranian seismic code [Volume 8, Issue 23, 2011, Pages 89-97]
  • Ebrahimi Hoseinzadeh, Bahman Molecular dynamics simulation of interaction of the anti-cancer drug paclitaxel with the cell membrane: investigation of changes in van der Waals energy and center of mass [Volume 17, Issue 57, 2019, Pages 15-25]
  • Ebrahimikhosroshahi, Mohammadreza Optimization of the roll forming process of U channels using a hybrid response surface and desirability function approach [Volume 15, Issue 51, 2017, Pages 237-250]
  • Ebrahimi Mamaghani, Ali Lateral vibration control of a beam subjected to the harmonic external load using a nonlinear energy sink [Volume 16, Issue 55, 2018, Pages 375-390]
  • Ebrahimzadeh, Soghra Design and Analysis of Grid-tied PV Power conditioning System Through LCL filter based on Capacitor Current Active Damping with Positive Output Virtual Impedance [Volume 21, Issue 74, 2023, Pages 1-19]
  • Edris Abadi, Reza Quality control modeling of manufactured products based on image processing and fuzzy transformation techniques [Volume 21, Issue 72, 2023, Pages 205-219]
  • Eftekhari, Ali Pressure Distribution Optimization in a Control Valve [Volume 14, Issue 45, 2016, Pages 93-98]
  • Eftekhari Yazdi, Mohammad Simulation of a High-Speed Train against a Turbulent Air Flow using Computational Fluid Mechanics Method and Multi-Layer Feed-Forward Neural Network Algorithm [Volume 19, Issue 67, 2021, Pages 119-134]
  • Eftekhari Yazdi, Mohammad Investigation of the layout of kilowatt-scale wind turbines located among megawatt-scale ones by means of an analytical model [Volume 20, Issue 70, 2022, Pages 161-177]
  • Eghbali, MODELING OF ROTARY REGENERATORS [Volume 10, Issue 28, 2012, Pages 9-18]
  • Eghbali, Mahdi Seismic Evaluation of Steel Moment Frames Rehabilitated with CBF, EBF and BRBF Braced Systems [Volume 14, Issue 47, 2016, Pages 95-114]
  • Eghbalpoor, Roozbeh Study of healing effect on mechanical behavior of a smart asphalt pavement and permanent deformations due to a moving load in the framework of finite element analysis [Volume 17, Issue 57, 2019, Pages 253-264]
  • Ehteram, H. NUMERICAL INVESTIGATION OF BROWNIAN MOTION EFFECT ON NANOFLUID MIXED CONVECTION IN ENCLOSURE WITH A HOT CENTRAL HEAT SOURCE [Volume 11, Issue 34, 2013, Pages 15-29]
  • Ehteram, Hamidreza Numerical study of mixed convection and entropy generation in enclosure with two circular heat source filled with nanofluid [Volume 14, Issue 47, 2016, Pages 199-211]
  • Eikani, MODELING OF SUBCRITICAL WATER EXTRACTION PROCESS OF MEDICINAL PLANTS [Volume 11, Issue 32, 2013, Pages 83-91]
  • Eivazi, Mohammad Taghi Laboratory modeling of heat transfer system of radiology tube using multi-walled carbon nanofluid and evaluation of heat transfer coefficient [Volume 12, Issue 38, 2014, Pages 45-58]
  • Elhami, m FRICTIONAL MODELING AND OPTIMIZATION FOR A VIBRATION MODAL ANALYSIS SIMULATOR DEVICE USING GENETIC ALGORITHM [Volume 11, Issue 34, 2013, Pages 87-93]
  • Elyasi, Ali Modeling the Influence of a Steady Magnetic Field on Action Potential Generation in Neurons [Volume 19, Issue 64, 2021, Pages 87-93]
  • Elyasi, Payman Numerical Modeling of Unsteady Pulsating nanofluid flow in a rectangular channel [Volume 14, Issue 44, 2016, Pages 21-34]
  • Emadi, Sima Process-oriented integration in industrial information systems [Volume 16, Issue 53, 2018, Pages 363-378]
  • Emadi, Sima Service Function Chaining Based on Grammar in Software Defined Networks [Volume 17, Issue 57, 2019, Pages 187-199]
  • Emadi, Sima Deep learning framework to extract anatomy for mosquito image classification [Volume 20, Issue 70, 2022, Pages 107-120]
  • Emamgholi, Manoochehr Generating Random Samples Using Response Surface Methodology without need to Distribution of Parameters [Volume 16, Issue 54, 2018, Pages 139-152]
  • Emami, Saeed Scheduling of jobs and maintenance activities in an unrelated parallel machines environment [Volume 17, Issue 58, 2019, Pages 233-247]
  • Emami, Samaneh Synthesis Optimization of Arithmetic Circuits on Coarse-Grain Reconfigurable Architecture [Volume 20, Issue 69, 2022, Pages 1-15]
  • Emami, Samaneh A novel approach based on CatBoost and explainable artificial intelligence for diagnosis of COVID-19 cases using patients' symptoms [Volume 21, Issue 74, 2023, Pages 231-241]
  • Esfahani, J.A. PRODUCTIVITY IMPROVEMENT OF A TUBULAR SOLAR STILL, USING CFD SIMULATION [Volume 11, Issue 33, 2013, Pages 45-56]
  • Eskandari, Hamid Finite Element and Experimental Analysis of Bond Behavior Between Reinforcement and Concrete Containing Fibers, Silicafume and Nanosilica [Volume 16, Issue 54, 2018, Pages 153-166]
  • Eskandari, Hamidreza Impact of information system flow on make-to-order manufacturer supply chain network: systems dynamics approach [Volume 8, Issue 22, 2010, Pages 21-35]
  • Eskandari, Hamidreza A Bi-Level Programming Model for Closed-Loop Supply Chain Network Design with Competition between two chains in Uncertain Environment: A Benders Decomposition Solution [Volume 15, Issue 49, 2017, Pages 201-215]
  • Eskandari, Hamidreza Developing a Mathematical Model for Determination of Asset Management Strategy Based on Maintenance and Procurement Factors [Volume 15, Issue 51, 2017, Pages 1-13]
  • Eskandari, Mohammad Provide a model for the seismic damage Assessment to buried fuel pipelines in Kermanshah [Volume 13, Issue 41, 2015, Pages 27-45]
  • Eskandari Jam, DESIGN OF ANISOGRID CONICAL LATTICE STRUCTURES [Volume 9, Issue 27, 2011, Pages 13-21]
  • Eskandarzadeh Ershad, Mohammad Ali The effect of fiber-matrix interface properties on damage behavior of composite materials [Volume 18, Issue 63, 2020, Pages 113-129]
  • Eslami, Sajjad Effect of Turbulence Model on Numerical Simulation of Turbulent Flow of Nanofluids in a Horizontal Pipe [Volume 17, Issue 58, 2019, Pages 279-293]
  • Eslami Farsani, Reza The surface stress effects on linear vibration of nonlocal triple-walled boron nitride nano tube conveying viscose fluid flow using DQM [Volume 13, Issue 43, 2016, Pages 47-66]
  • Esmaeili, M. INVESTIGATION NUMERICAL BEHAVIOR STATIC AND DYNAMIC EMBANKMENTS OF RAILWAY CONSTRUCTED BY GEOFOAM [Volume 12, Issue 36, 2014, Pages 65-83]
  • Esmaeili, Sheida Investigation of the oxygen function in the selective oxidation of propane to acrylic acid over Mo1V0.3Te0.23Nb0.12Ox catalyst using kinetic modeling [Volume 17, Issue 57, 2019, Pages 55-68]
  • Esmaeilian, gholamreza Presenting a model for determining and discovering the causal relationships between the effective risks of the product family developing process in the Iranian automotive industry [Volume 20, Issue 68, 2022, Pages 15-34]
  • Esmaeilian, Gholam Reza A hybrid algorithm to solve the flexible oil refinery production planning problem [Volume 20, Issue 69, 2022, Pages 113-129]
  • Esmaeiltabar Nesheli, RESPONSE MODIFICATION FACTOR OF SPECIAL STEEL TRUSS MOMENT FRAMES [Volume 11, Issue 32, 2013, Pages 43-56]
  • Esmaili, ANALYSIS OF COLD FLOW IN INTERNAL COMBUSTION ENGINES BY USING DYNAMIC MESH AND CHANGING TOPOLOGY [Volume 9, Issue 25, 2011, Pages 57-65]
  • Esmaili, Masoud Integrated control scheme for induction generator, fault current limiter, and energy storage in wind farms [Volume 16, Issue 55, 2018, Pages 87-100]
  • Esmaili Torshabi, Ahmad Investigation the motion data clustering of lung tumor on its position estimation at external surrogates’ radiotherapy [Volume 20, Issue 68, 2022, Pages 73-83]
  • Ettefagh, Mir Mohammad Exact uncertainty analysis of the bridge dynamic response during random vehicle crossing by statistical methods [Volume 14, Issue 47, 2016, Pages 77-93]
  • Ezani, Javad DEVELOPMENT OF A DYNAMIC MODEL FOR SIMULATION OF REAL-TIME TRANSIENT TURBOJET ENGINE PERFORMANCE IN SIMULINK [Volume 15, Issue 50, 2017, Pages 95-108]
  • Ezoji, Mehdi Pyramid Image Fusion Based on Contourlet and Enhanced Structural Decomposition [Volume 21, Issue 73, 2023, Pages 71-92]
  • Ezzati, nematollah Distributed spectrum sensing in rem based cognitive radio networks [Volume 17, Issue 56, 2019, Pages 223-233]
  • Ezzodin, Amir Damage Localization and Quantification of Beams Using Wavelet Transform [Volume 12, Issue 39, 2014, Pages 1-11]

F

  • Fadaei, Sadegh Automatic Speaker Recognition based on Gabor Features and Convolutional Neural Networks [Volume 21, Issue 72, 2023, Pages 49-67]
  • Fadaei, Sadegh Speaker Recognition Using Convolutional Neural Network and Neutrosophic [Volume 21, Issue 75, 2023, Pages 1-18]
  • Fadaeieslam, Mohammad Javad A Multi-task Model to Detect Saliency and Edge using Hybrid Cost Function [Volume 20, Issue 71, 2022, Pages 151-163]
  • Fadavi, ESTIMATION OF PEAK GROUND ACCELERATION, VELOCITY AND DISPLACEMENT USING ARTIFICIAL NEURAL NETWORK [Volume 7, Issue 19, 2009, Pages 11-21]
  • Fadavi Amiri, Mohammad Reza New method for generation of artificial earthquake record by new model in compression and Artificial Neural Networks [Volume 14, Issue 46, 2016, Pages 75-85]
  • Faezian, Ghassem Design and construction of a rotor for switched reluctance motor to improve torque profile [Volume 19, Issue 67, 2021, Pages 73-83]
  • Faezinia, Morteza Online and Robust Anomaly Detection using Recurrent Neural Network [Volume 21, Issue 74, 2023, Pages 243-254]
  • Faghih Khorasani, Ahmadreza Experimental and Numerical Investigation of Received ‎Solar Radiation on a Domed and Flat Roof [Volume 13, Issue 43, 2016, Pages 15-24]
  • Fakharian, Mohammad M Design of a Graphene-Based Multi-Band Metamaterial Perfect Absorber with Polarization-Insensitive Ability for Terahertz Applications [Volume 20, Issue 69, 2022, Pages 93-102]
  • Fakharian, MohammadMehdi Spider web structure as high impedance surfaces [Volume 12, Issue 38, 2014, Pages 75-82]
  • Fakharian, Pouyan APPROXIMATE EIGENVALUE OF PLATE BY ARTIFICIAL NEURAL NETWORKS [Volume 11, Issue 35, 2013, Pages 49-62]
  • Fakhri, M. DEVELOPING A MODEL TO PREDICT THE PULSE DURATION OF TENSILE RESPONSE AT THE BOTTOM OF ASPHALT LAYER [Volume 11, Issue 33, 2013, Pages 83-98]
  • Falaghi, WIND FARM EFFECTS ON TOTAL TRANSFER CAPABILITY [Volume 10, Issue 30, 2012, Pages 61-75]
  • Fallah, Hamed A Bi-Level Programming Model for Closed-Loop Supply Chain Network Design with Competition between two chains in Uncertain Environment: A Benders Decomposition Solution [Volume 15, Issue 49, 2017, Pages 201-215]
  • Fallah, keivan Droplet Breakup with Unequal sized in Symmetric Y-junction Microchannel [Volume 20, Issue 70, 2022, Pages 79-91]
  • Fallah, Seyed Hossein A Mathematical modeling and optimization of solar chimney power plant by SA and PSO algorithm [Volume 16, Issue 53, 2018, Pages 75-87]
  • Fallahi, Alireza CT Saturation Detection with Calculation of Instantaneous Impedance of Magnetic Branch Using FILT [Volume 15, Issue 51, 2017, Pages 371-380]
  • Fallahi, Mehrab Simulation of Sour Water Stripping Unit in Oil Refinery with Consideration of Ammonia Separation [Volume 22, Issue 79, 2024, Pages 59-77]
  • Fani Maleki, Hanieh Modeling and Reduction of Nox Production in Submerged Combustion Vaporizer Using Fuzzy Inference System [Volume 22, Issue 76, 2024, Pages 197-211]
  • Farahani, Ahmad Study on the Nonlinear Behavior of Strengthened RC Frames using Steel Prop and Crub in Connections and Strengthening of Beam and Column [Volume 14, Issue 46, 2016, Pages 25-38]
  • Farahani, Mohammad Optimal Scheduling of Energy Storage Systems with Private Ownership Based on a Stochastic-Robust Hybrid Optimization Model in Energy and Ancillary Services Markets [Volume 22, Issue 76, 2024, Pages 1-12]
  • Farahat, SHAPE OPTIMIZATION OF SUPERSONIC WIND TUNNEL DIFFUSER USING GENETIC ALGORITHM [Volume 10, Issue 28, 2012, Pages 19-29]
  • Farahat, Said Numerical and Experimental Study of Ventilation Effects on Ventilated Cavitating Flow [Volume 15, Issue 51, 2017, Pages 29-41]
  • Farahi Shahri, Saeed A fast hybrid refining optimization with sensitivity-based partitioning approach for truss structures [Volume 17, Issue 57, 2019, Pages 127-146]
  • Faraji, Amir Proposing an Integrated Time-Cost Management Model based on Building Information Modeling (BIM) and Blockchain Technology (BCT) Smart contract Development Approach in the Construction Industry [Volume 21, Issue 74, 2023, Pages 191-206]
  • Faraji, Mohammad DEVELOPMENT OF A DYNAMIC MODEL FOR SIMULATION OF REAL-TIME TRANSIENT TURBOJET ENGINE PERFORMANCE IN SIMULINK [Volume 15, Issue 50, 2017, Pages 95-108]
  • Farajidavar, Aydin A minimal electrophysiological model of gastric smooth muscle cell based on effective ionic currents [Volume 19, Issue 67, 2021, Pages 181-189]
  • Faramarzi, Samaneh Adjustment of Optimal Parameters to Control the Temperature in Different Conductors [Volume 22, Issue 77, 2024, Pages 107-116]
  • Farashi, Zahra Optimal Dynamic Manipulation Workspace of a Single Link Robot Manipulator [Volume 16, Issue 54, 2018, Pages 429-441]
  • Farbod, Mansoor Modeling of thermal conductivity of ethylene glycol nanofluids containing carbon nanotubes by Multilayer Perceptron neural network [Volume 17, Issue 59, 2019, Pages 1-9]
  • Farhadi, Alireza Analysis and simulation of atmospheric burners of heaters in city gas pressure reduction station [Volume 20, Issue 71, 2022, Pages 165-174]
  • Farhadi, Daryoush An Intelligent Model Based on Phase Space Analysis for Fault Classification in Single Circuit Transmission Lines [Volume 18, Issue 60, 2020, Pages 227-243]
  • Farhadi-Kangarlu, Mohammad Comprehensive Modeling of Induction Motor Imbalance Condition to ‎Precise Assessment of Steady State Performance Based on Complex ‎Current Unbalance Factor [Volume 19, Issue 66, 2021, Pages 65-78]
  • Farhadi-Kangarlu, Mohammad A Control Strategy for Cascaded H-Bridge Based STATCOM with Unequal Capacitive DC Links Based on Model Predictive Method [Volume 21, Issue 73, 2023, Pages 31-45]
  • Farhadi Savadkouhi, Mahsa Provide a method for recognizing trust in social networks according to individual and personal characteristics using a compatible neural-fuzzy inference system method [Volume 21, Issue 75, 2023, Pages 115-127]
  • Farhatnia, Fatemeh Determination and comparison of mechanical properties of articular cartilage using pro-hyper-viscoelastic models based on an unconfined stress relaxation [Volume 19, Issue 66, 2021, Pages 95-106]
  • Farivar, Faezeh Fault Tolerant Control of Wind Turbine Systems using Fuzzy Sliding Mode Control [Volume 20, Issue 71, 2022, Pages 135-150]
  • Farrokhi Lahromi, Ehsan A New Real-Time Optimization-Based Energy Management Strategy for Battery/Supercapacitor Hybrid Storage System in DC Microgrid [Volume 21, Issue 73, 2023, Pages 17-30]
  • Farsi, Amir Abbas The surface stress effects on linear vibration of nonlocal triple-walled boron nitride nano tube conveying viscose fluid flow using DQM [Volume 13, Issue 43, 2016, Pages 47-66]
  • Farsi, Mohammadreza Design and Simulation of Second Order Sigma-Delta Modulator with Very High Precision and Low Power Consumption for Medical Applications [Volume 16, Issue 55, 2018, Pages 191-197]
  • Farzam, Masood Effect of the reinforcement patterns on the seismic performance of the short shear walls at Nuclear Power stations [Volume 14, Issue 45, 2016, Pages 79-92]
  • Farzam, Masood Effect of the axial force and material strength on the seismic behavior of the short shear walls [Volume 15, Issue 48, 2017, Pages 125-137]
  • Farzanegan, A. SINGLE OBJECTIVE OPTIMIZATION OF CLOSED BALL MILLING CIRCUIT OF ESFORDI PHOSPHATE PLANT [Volume 11, Issue 33, 2013, Pages 15-25]
  • Farzi, Ali Modeling and Simulation of Catalytic Direct Partial Oxidation of Methane to Methanol in a Fluidized-Bed Reactor [Volume 16, Issue 52, 2018, Pages 397-407]
  • Farzin, MODELING OF NONDESTRUCTIVE ULTRASONIC TEST OF BONDING BETWEEN ALUMINUM AND COMPOSITE USING FEM [Volume 9, Issue 26, 2011, Pages 1-12]
  • Fasihi, Optimized ANN Algorithm for Analyzing the Road Flexible Pavements [Volume 8, Issue 21, 2010, Pages 45-56]
  • Fasihi, Fazel Equivalent Axle Load Factor Prediction Based on Artificial Neural Networks [Volume 19, Issue 65, 2021, Pages 149-160]
  • Fathi, PRIORITIZATION OF EVENTFUL ROADS CORRECTION USING ARTIFICIAL NEURAL NETWORKS [Volume 8, Issue 20, 2010, Pages 71-81]
  • Fathi, Mohammad Bagher A molecular dynamics study on the wettability property of modified hydrophilic quartz (001) surface with hydrophobic nanoparticles [Volume 21, Issue 73, 2023, Pages 229-240]
  • Fathi, Mojtaba Finite elements analysis of a New Moment-Resistant Connection in Precast Concrete Frames under cyclic loading [Volume 15, Issue 49, 2017, Pages 189-200]
  • Fathi, Rahim Optimal Allocation of Renewable Resources in Distribution Networks Considering Uncertainty Based on Info-Gap Decision Theory Using Improved Salp Swarn Algorithm [Volume 20, Issue 68, 2022, Pages 207-223]
  • Fathollahi, Sobhan Exergy analysis of a direct-expansion solar-assisted heat pump system considering the effects of pressure drop of the R134a refrigerant flow [Volume 16, Issue 52, 2018, Pages 53-66]
  • Fazeli Farsani, Iraj Camprarison of different Turbulent Modeling on Rotating Airfoil with Corolios and centrifugal accelaration [Volume 21, Issue 73, 2023, Pages 135-145]
  • Fazli khalaf, Mohamadreza A reliable closed-loop supply chain network design under uncertainty: A case study of a lead-acid battery manufacturer [Volume 12, Issue 39, 2014, Pages 45-60]
  • Feili, Meysam Simultaneous operation of electricity and natural gas systems through the P2P energy trading mechanism [Volume 21, Issue 75, 2023, Pages 205-224]
  • Fekri, Mojtaba Presenting A New Method for Identifying the Initial Events of Cascading Failures with the Aim of Analyzing the Vulnerability of the Power System [Volume 19, Issue 67, 2021, Pages 191-205]
  • Fekri, Roxana Modelling uncertainty in performance appraisal process based on evidence theory and fuzzy theory [Volume 15, Issue 51, 2017, Pages 411-432]
  • Ferdosi, Saeedeh Simulation and Implementation of Obstacle Avoidance and Synchronization Tasks using Probabilistic and Timed Supervisory Control Theory in Swarm Robotics [Volume 16, Issue 55, 2018, Pages 175-190]
  • Fereidoon, OPTIMIZATION OF PRISMATIC CORE SANDWICH PANEL BASED ON PARTICLE SWARM ALGORITHM [Volume 8, Issue 20, 2010, Pages 17-26]
  • Fereidoon, OPTIMIZATION OF PRISMATIC CORE SANDWICH PANEL BASED ON PARTICLE SWARM ALGORITHM [Volume 8, Issue 20, 2010, Pages 17-26]
  • Fereidoon, PROGRESSIVE DAMAGE ANALYSIS OF GLASS-EPOXY LAMINATED COMPOSITES UNDER STATIC TENSILE LOADING AT LOW TEMPERATURE [Volume 8, Issue 21, 2010, Pages 33-43]
  • Fereidoon, Abdolhossein Young's Modulus prediction of polyurethane and acrylonitrile butadiene styrene polymer blend based on phase morphology [Volume 16, Issue 52, 2018, Pages 1-13]
  • Fereidun, A. NUMERICAL INVESTIGATION OF NATURAL CONVECTION AROUND A CIRCULAR CYLINDER PLACED IN A CAVITY FILLED WITH NANOFLUID BY CHANGING THE LOCATION AND RADIUS [Volume 11, Issue 33, 2013, Pages 57-68]
  • Fereidunian, Alireza Analysis of Emergent Behavior of Reliability in the System of Systems Including Energy Hubs [Volume 19, Issue 66, 2021, Pages 1-21]
  • Feshki Farahani, Hassan A New Topology for Single Phase Voltage Source Multilevel Inverter Based on Reduction of Semiconductor Switches [Volume 16, Issue 52, 2018, Pages 97-108]
  • Fiouz, Alireza The effect of the friction pendulum isolation system on the seismic response of structures located on different types of soils [Volume 20, Issue 68, 2022, Pages 1-14]
  • Foorginejad, Abolfazl MODELING OF ELECTRICAL DISCHARGE MACHINING PROCESS USING NEURAL NETWORK AND ITS OPTIMIZATION USING FIREFLY ALGORITHM [Volume 12, Issue 37, 2014, Pages 1-14]
  • Fotoohi, Somayeh Design and Atomic Modeling of Multimode Sliding Electromechanical Switch Based on Bilayer Armchair α-Graphyne Nanoribbons [Volume 18, Issue 62, 2020, Pages 71-82]
  • Fotoohi, Somayeh Study of the electronic and optical properties of doped gallium sulfide monolayer by first principles calculations [Volume 20, Issue 68, 2022, Pages 47-58]
  • Fotouhi Bafghi, E. PRODUCTIVITY IMPROVEMENT OF A TUBULAR SOLAR STILL, USING CFD SIMULATION [Volume 11, Issue 33, 2013, Pages 45-56]
  • Frashad, Seyed Ali Numerical modeling for thermal performance augmentation of nanofluid in solar flat plate collector equipped with twisted tape [Volume 17, Issue 57, 2019, Pages 295-313]
  • Freidoonimehr, navid Entropy Generation Analysis for an MHD Slip Nano-Fluid Flow over a Stretching Permeable Surface [Volume 15, Issue 49, 2017, Pages 39-53]
  • Freidoonimehr, Navid Parametric analysis and optimization of the supercritical ejector refrigeration cycle with different working fluids using Artificial neural network and particle swarm optimization algorithm [Volume 15, Issue 50, 2017, Pages 121-133]

G

  • G, R CFD Investigation on Nanofluids Convective Heat Transfer in a Duct Containing Spherical Surfaces [Volume 16, Issue 52, 2018, Pages 347-361]
  • Galeban, Mohammad Reza Crack detection in beams using Hilbert-Huang transform [Volume 16, Issue 52, 2018, Pages 27-40]
  • Galvani, Sadjad Comprehensive Modeling of Induction Motor Imbalance Condition to ‎Precise Assessment of Steady State Performance Based on Complex ‎Current Unbalance Factor [Volume 19, Issue 66, 2021, Pages 65-78]
  • Ganadzadeh Guilani, Hossein Modeling of VLE and LLE Systems by using Thermodynamic model with ANFIS Structures and GMDH Type-Neural Network [Volume 16, Issue 55, 2018, Pages 19-33]
  • Ganjali, Ahmad Location of Optimal Stress Points in Isogeometric Analysis [Volume 13, Issue 40, 2015, Pages 151-167]
  • Ganjali, Ahmad Energy Absorption of Auxetic Metallic Yield Damper Made of Shape Memory Alloys [Volume 22, Issue 77, 2024, Pages 79-93]
  • Gardounzade, S.E. DYNAMIC ANALYSIS OF SATELLITE SEPARATION USING RETRO ROCKET FOR INJECTION WITH INITIAL ROTATION IN ORBIT [Volume 12, Issue 36, 2014, Pages 17-27]
  • Gazaneh, Omid Simulation and technical- economic analysis of solar water heater for residential users [Volume 13, Issue 43, 2016, Pages 107-119]
  • Gerami, Nilufar Energy Consumption Modeling of Manufacturing Processes in Industrial Units Based on Linear Piece-Wise Approximation Method with the aim of Implementing Demand Response Programs and Participating in Energy and Ancillary Service Market [Volume 17, Issue 59, 2019, Pages 179-193]
  • GH, M Static Security Evaluation of Power Systems Considering Uncertainties Using a Point Estimation Method [Volume 15, Issue 51, 2017, Pages 359-370]
  • Ghaderi, Fatemeh Mathematical modeling and investigating the effect of the area of the horizontal stabilizer on the stability of a single-main-rotor helicopter in forward flight [Volume 17, Issue 58, 2019, Pages 69-80]
  • Ghaderi, Reza Investigation of Nonlinear Vibration Behavior of Piezoelectric Micro-Beam Interacting with Spherical Nano Particles [Volume 15, Issue 48, 2017, Pages 85-98]
  • Ghaderi, Seyed Hadi An Algorithm for Finding Optimum Distribution of the Turbine Blades Considering the Initial Wheel Unbalance [Volume 14, Issue 47, 2016, Pages 115-125]
  • Ghadimi, Siamak Crack Detection of Timoshenko Beam Using Frequency and Frequency Response Function [Volume 16, Issue 54, 2018, Pages 205-216]
  • Ghadiri, Mohammad Mahdi Investigation of effective parameters on capturing particles by secondary flows in rectangular microchannels [Volume 19, Issue 65, 2021, Pages 15-27]
  • Ghadiri Soufi, Elham Model of a Work Breakdown Structure (WBS) Framework and AOA Diagram for Efficient Project Management of Lead – Zinc Skarn Exploration with Exploratory Data [Volume 16, Issue 53, 2018, Pages 89-100]
  • Ghaebi, Hadi Thermodynamic and Exergoeconomic Study of an Absorption-Compression Refrigeration Cycle Driven by a Geothermal Energy Resource [Volume 22, Issue 78, 2024, Pages 59-77]
  • Ghaemi Osgouie, Seyed Kambiz Numerical study of the effect of adding corona discharge based on plasma actuator on flow control performance in a horizontal axis wind turbine with rough surfaces [Volume 21, Issue 74, 2023, Pages 291-303]
  • Ghaffari, Masoud Probabilistic Investigation of Cavitation Occurrence on Morning-Glory Spillways Using Numerical Modeling and Response Surface Method [Volume 22, Issue 78, 2024, Pages 201-216]
  • Ghaffari, S.P. Numerical modeling of nanoparticles transport effect in mixed convection of nanoï‌‚uid with variable properties in a square cavity with inlet and outlet port [Volume 12, Issue 38, 2014, Pages 83-102]
  • Ghaffarinasab, Nader Single allocation hub location problem considering zero-one uncertain demands [Volume 19, Issue 66, 2021, Pages 157-173]
  • Ghahfarokhi, Zahra Numerical Study of fluid flow and heat transfer of mixed convection and entropy generation in a L-shaped cavity filled with nanofluid [Volume 15, Issue 50, 2017, Pages 135-147]
  • Ghahremani, Amir Optimization of open pit mines fleet using Simulation-based optimization method (Case study: SONGUN copper mine) [Volume 17, Issue 56, 2019, Pages 169-190]
  • Ghahremani, Hossein Quantitative Risk assessment for 35 KM oil transfer pipeline leakage from Mansouri oil field to Ahwaz booster pump with QRA and Olga dynamic modeling [Volume 21, Issue 75, 2023, Pages 181-191]
  • Ghahremani, Milad Theoretical analysis based on CFD method for evaluation of Pd-Ag Membrane reactor performance in comparison with conventional reactor during dehydrogenation of cyclohexane [Volume 18, Issue 60, 2020, Pages 217-226]
  • Ghahremani, Milad Modeling and Simulation of pervaporation membrane reactor during levulinic acid esterification process with ethanol to produce ethyl levulinate: computational fluid dynamic (CFD) analysis [Volume 19, Issue 67, 2021, Pages 235-243]
  • Ghahremanian, INVESTIGATION OF TEMPERATURE DISTRIBUTION IN THE DISCHARGE MACHINING STEEL P20 [Volume 9, Issue 27, 2011, Pages 73-79]
  • Ghahremani-moghadam, Danial Investigating the effect of laser shock process on fracture and fatigue properties of 2024-T351 aluminum alloy using numerical modeling [Volume 21, Issue 75, 2023, Pages 67-82]
  • Ghahremani-Moghadam, Danial Determination of Young's modulus of Boron Nitride nano tubes using energy method [Volume 21, Issue 73, 2023, Pages 159-169]
  • Ghalehnovi, Mansour Study of the effect of friction rotational damper, viscoelastic and TADAS on the structures seismic behaviour [Volume 17, Issue 59, 2019, Pages 87-107]
  • Ghamarian, Ali Effect of hole, angle and direction of applied oblique load on crashworthiness parameters of end capped circular tubes: A numerical simulation and experimental study [Volume 20, Issue 68, 2022, Pages 59-71]
  • Ghanbari, Akbar The performance investigation of discontinuity definition techniques on numerical solution of crack problems by meshless method [Volume 18, Issue 62, 2020, Pages 115-128]
  • Ghanbari, Mahmood Control of Sensorless PMSM using State Dependent Model Reference Adaptive System and Adaptive Augmented Observer [Volume 18, Issue 63, 2020, Pages 85-95]
  • Ghandehari, Erfan Offering four new models in the form of a hybrid methodology applied in order to promote the use [Volume 16, Issue 54, 2018, Pages 1-20]
  • Ghandehari, Erfan Presentation of a Combined Code Generator and its Development in the Form of New Capabilities with Service-Oriented Architecture Approach [Volume 16, Issue 54, 2018, Pages 105-123]
  • Ghani,, Roozbeh Modeling and optimization of a fixed bed catalytic reactor for the cyclohexane dehydrogenation process [Volume 20, Issue 69, 2022, Pages 167-172]
  • Ghanizadeh, A. DEVELOPING A MODEL TO PREDICT THE PULSE DURATION OF TENSILE RESPONSE AT THE BOTTOM OF ASPHALT LAYER [Volume 11, Issue 33, 2013, Pages 83-98]
  • Ghanizadeh, Mohammad Effect of the reinforcement patterns on the seismic performance of the short shear walls at Nuclear Power stations [Volume 14, Issue 45, 2016, Pages 79-92]
  • Ghanizadeh, Mohammad Effect of the axial force and material strength on the seismic behavior of the short shear walls [Volume 15, Issue 48, 2017, Pages 125-137]
  • Ghannad, Mohammad Ali Effect of soil-structure interaction on seismic demands of structures in evaluation and design procedures [Volume 14, Issue 44, 2016, Pages 49-67]
  • Gharagouzlou, Elmira Consequence modeling for chlorine release of a storage tank with the field experiment data [Volume 12, Issue 38, 2014, Pages 15-25]
  • Ghareh, Soheil Evaluation of Chahchahe Earth Dam Behaviour during Construction and First Impoundment Stage Using the Results of Monitoring and Back Analysis [Volume 17, Issue 59, 2019, Pages 11-24]
  • Ghareh, Soheil Equivalent Axle Load Factor Prediction Based on Artificial Neural Networks [Volume 19, Issue 65, 2021, Pages 149-160]
  • Gharehpetian, Gevork B. Presenting A New Method for Identifying the Initial Events of Cascading Failures with the Aim of Analyzing the Vulnerability of the Power System [Volume 19, Issue 67, 2021, Pages 191-205]
  • Gharibshahiyan, ehsan FINITE ELEMENT SIMULATIONS OF HEAT TRANSFER IN FRICTION STIR WELDING OF AL 6061 [Volume 11, Issue 35, 2013, Pages 1-9]
  • Ghasemi, MODELLING OF FCC PROCESS BASED ON CLUSTER SIZE VARIATION ALONG THE RISER [Volume 10, Issue 30, 2012, Pages 87-97]
  • Ghasemi, Abdolmajid Experimental study and empirical modeling of lithium ion battery lifetime [Volume 16, Issue 55, 2018, Pages 35-40]
  • Ghasemi, Ahmad Energy Consumption Modeling of Manufacturing Processes in Industrial Units Based on Linear Piece-Wise Approximation Method with the aim of Implementing Demand Response Programs and Participating in Energy and Ancillary Service Market [Volume 17, Issue 59, 2019, Pages 179-193]
  • Ghasemi, Ahmad Proposing a new model for optimal energy management of a residential microgrid with the aim of resiliency and flexibility indexes improvement [Volume 20, Issue 70, 2022, Pages 61-77]
  • Ghasemi, Mohammad Reza A new and low cost proposed method for failure probability estimation based on Monte Carlo simulation [Volume 16, Issue 54, 2018, Pages 189-203]
  • Ghasemi, Mohammad Reza A fast hybrid refining optimization with sensitivity-based partitioning approach for truss structures [Volume 17, Issue 57, 2019, Pages 127-146]
  • Ghasemi, Seyed Ebrahim Modeling and numerical analysis of viscoelastic fluid flow in a permeable channel [Volume 21, Issue 73, 2023, Pages 255-262]
  • Ghasemian Moghaddam, IMPROVEMENT OF INTERNAL COMBUSTION ENGINES COOLING BY CHANGING THE PATTERN OF COOLANT INLET [Volume 9, Issue 25, 2011, Pages 67-75]
  • Ghasemi Kafroudi, Simulation of degradation reactions of Biodegradable Poly-lactic acid polymer in the human body [Volume 9, Issue 24, 2011, Pages 29-38]
  • Ghasvareh, Mohammad Amin A Game Theory-Based Approach to Hierarchically Rank Responses to Geological and Geotechnical Risks [Volume 22, Issue 78, 2024, Pages 157-170]
  • Ghatreh Samani, Mohammadreza Presenting a Model and Heuristic Algorithm for Two-Echelon Location-Routing Problem under Uncertainty Considering the Simultaneous Pickup and Delivery [Volume 16, Issue 53, 2018, Pages 339-361]
  • Ghayebi, Hadi A Trigeneration System Using Triple Pressure HRSG(Energy, Exergy and Thermoeconomic Analysis) [Volume 22, Issue 78, 2024, Pages 79-101]
  • Ghayebi, Hadi Cogeneration system based on combined Brayton and inverse Brayton cycle based on biogas fuel [(Articles in Press)]
  • Ghayoor, Mehrnaz A new hybrid method DSM for parameter setting of meta-heuristic algorithms [Volume 19, Issue 65, 2021, Pages 161-180]
  • Ghayoor, Mehrnaz The new hybrid ROYKA method for optimizing multi-response problems (Case study: power plants of IRAN) [Volume 20, Issue 69, 2022, Pages 41-59]
  • Ghayoori Sales, Majid Data Tarn: A New Approach for Management and Real-Time Analyses of Big Data [Volume 16, Issue 55, 2018, Pages 133-154]
  • Ghayur safar, Jalil Comprehensive Modeling of Transient Analysis of Grounding System under Lightning Surges [Volume 17, Issue 59, 2019, Pages 165-177]
  • Ghazi Ardakani, Mohammadjavad Indirect vector control of three phase induction motor based on a 2/3 level inverter [Volume 18, Issue 60, 2020, Pages 127-141]
  • Ghazi Mirsaeid, Seyed Amir Farhad Improving the Structural Health Monitoring System in Detection of Tiny Crack Locations using Wavelet Transform and Digital Filter [Volume 17, Issue 58, 2019, Pages 305-316]
  • Ghazizadeh-Ahsaee, Mahdi The use of fault current limiter to reduce the operating time of relays [Volume 16, Issue 53, 2018, Pages 171-181]
  • Ghaznavi, A. EFFECT OF JOINT GEOMETRY ON THE BEHAVIOR AND FAILURE MODES OF SANDWICH T-JOINTS UNDER TRANSVERSE STATIC LOADS [Volume 12, Issue 36, 2014, Pages 85-101]
  • Ghaznavi, A. EFFECT OF JOINT GEOMETRY ON THE BEHAVIOR AND FAILURE MODES OF SANDWICH T-JOINTS UNDER TRANSVERSE STATIC LOADS [Volume 12, Issue 36, 2014, Pages 85-101]
  • Ghaznavi, A. Investigation of main frame performance of 2 MW wind turbine using finite element method [Volume 20, Issue 71, 2022, Pages 27-41]
  • Ghazvehi, Mohammad Investigating the Effects of Nanoparticle and Surfactant on Mass Transfer coefficient in Pulsed Packed Column [Volume 19, Issue 66, 2021, Pages 141-156]
  • Ghiyami, Taha Dynamic optimization of acetylene hydrogenation reactors with considering catalyst deactivation [Volume 20, Issue 69, 2022, Pages 71-80]
  • Gh. Lovineh, Shirin Numerical simulation and theoretical study on effects of operating parameters in Persian Gulf desalination using vacuum membrane distillation [Volume 16, Issue 55, 2018, Pages 41-49]
  • Ghobadi, Nayereh Investigation of Electronic Properties and Interlayer Current Characteristics of Janus two-dimensional MoSi2PmAsn and MoSi2AsmSbn [Volume 20, Issue 71, 2022, Pages 43-60]
  • Ghobadi, Nayereh Two-dimensional XMoSiP2/BP (X= S, Se) Heterostructures as Efficient Photocatalysts for Overall Water Splitting [Volume 22, Issue 78, 2024, Pages 123-140]
  • Ghobadisamani, Mohammad Optimization of open pit mines fleet using Simulation-based optimization method (Case study: SONGUN copper mine) [Volume 17, Issue 56, 2019, Pages 169-190]
  • Ghoddosian, OPTIMAL DESIGN OF STRUCTURAL SUPPORT POSITION FOR MINIMIZING MAXIMAL BENDING MOMENT BY PSO WITH MULTI LOADS [Volume 8, Issue 22, 2010, Pages 59-67]
  • Ghoddosian, SHAPE OPTIMIZATION OF CONTACT PROBLEMS SUBJECT TO MULTIPLE LOAD CASES USING BI-DIRECTIONAL EVOLUTIONARY STRUCTURAL OPTIMIZATION [Volume 10, Issue 30, 2012, Pages 77-86]
  • Ghodrati, Maryam Improvement in the Performance of Tunneling Carbon Nanotube Field Effects Transistor in Presence of Underlap [Volume 17, Issue 59, 2019, Pages 215-224]
  • Ghodrati Amiri, ESTIMATION OF PEAK GROUND ACCELERATION, VELOCITY AND DISPLACEMENT USING ARTIFICIAL NEURAL NETWORK [Volume 7, Issue 19, 2009, Pages 11-21]
  • Ghodrati Amiri, ESTIMATION OF PEAK GROUND ACCELERATION, VELOCITY AND DISPLACEMENT USING ARTIFICIAL NEURAL NETWORK [Volume 7, Issue 19, 2009, Pages 11-21]
  • Ghodrati Amiri, Effect of pounding in seismic demand of seismic isolated structures [Volume 9, Issue 24, 2011, Pages 53-64]
  • Ghodrati Amiri, INVESTIGATION OF DETERIORATION OF HYSTERETIC LOOPS IN NONLINEAR STATIC ANALYSIS (PUSHOVER) FOR SPECIAL MOMENT RESISTING FRAME WITH SHEAR WALLS [Volume 10, Issue 30, 2012, Pages 33-41]
  • Ghodrati Amiri, Gholamreza Damage Localization and Quantification of Beams Using Wavelet Transform [Volume 12, Issue 39, 2014, Pages 1-11]
  • Ghodrati Amiri, Gholamreza Damage detection in steel structures using static data via Genetic Algorithm [Volume 13, Issue 41, 2015, Pages 147-158]
  • Ghodrati Amiri, Gholamreza Development of PGA Attenuation Relationships for Iran [Volume 16, Issue 54, 2018, Pages 167-175]
  • Ghodsi Hassanabad, Madjid Identifying damage location and severity in a template platform located in Persian Gulf using the Improved modal strain energy [Volume 19, Issue 67, 2021, Pages 167-179]
  • Ghohani Arab, Hamed A new and low cost proposed method for failure probability estimation based on Monte Carlo simulation [Volume 16, Issue 54, 2018, Pages 189-203]
  • Gholami, Hamed Determination of bearing capacity factors of ring footings using the method of stress characteristics [Volume 14, Issue 46, 2016, Pages 61-73]
  • Gholami, Mohammad 3D modeling of the cylindrical type electrostatic precipitator for collecting fine diesel particles and controlling the air pollution [Volume 20, Issue 68, 2022, Pages 127-137]
  • Gholami, Shahab Investigate on Non-Fourier Heat Conduction in Sand Using Models based on Fractional Calculus [Volume 15, Issue 48, 2017, Pages 15-22]
  • Gholamian, Seyyed Akbar An integrated model for controlling project delays based on the time buffer management approach [Volume 16, Issue 55, 2018, Pages 1-18]
  • Gholami fard, Milad Probabilistic optimal power flow to determine the Locational marginal price considering wind generation [Volume 15, Issue 48, 2017, Pages 165-182]
  • Gholami Rudi, Somayeh Two-dimensional XMoSiP2/BP (X= S, Se) Heterostructures as Efficient Photocatalysts for Overall Water Splitting [Volume 22, Issue 78, 2024, Pages 123-140]
  • Gholhaki, Majid Damage identification of column under the axial load based on wavelet transform and modal data [Volume 18, Issue 63, 2020, Pages 51-64]
  • Gholizad, Amin Progressive collapse analysis methods due to blast loading in steel moment frames [Volume 15, Issue 51, 2017, Pages 51-65]
  • Ghomashi, Mohammad amin Motion path following coordinated control for in-wheel motor electric vehicle via implementation robust control and optimal control [(Articles in Press)]
  • Ghomghale, Awat The Application of Frailty Model in Remaining Useful Life Estimation (Case Study: Sungun Copper Mine's Loading System) [Volume 18, Issue 62, 2020, Pages 129-142]
  • Ghomi, ANALYSIS OF COLD FLOW IN INTERNAL COMBUSTION ENGINES BY USING DYNAMIC MESH AND CHANGING TOPOLOGY [Volume 9, Issue 25, 2011, Pages 57-65]
  • Ghoohestani, Soleyman The performance investigation of discontinuity definition techniques on numerical solution of crack problems by meshless method [Volume 18, Issue 62, 2020, Pages 115-128]
  • Ghorbanali, Alireza Multiple transfer learning-based multimodal sentiment analysis using weighted convolutional neural network ensemble [Volume 21, Issue 72, 2023, Pages 83-97]
  • Ghorbanian Kerdabadi, Vahid Design and analysis of a 2 dimensional micro-gripper by using of rotational displacement of clamped perpendicular micro-beams due to piezoelectric actuation [Volume 21, Issue 72, 2023, Pages 123-136]
  • Ghorbannia Delavar, Arash VMRCD: an algorithm for dependable routing using the re-clustering for vehicular networks with v2v communication [Volume 20, Issue 71, 2022, Pages 87-99]
  • Ghorbanzadeh Ahangari, Morteza Young's Modulus prediction of polyurethane and acrylonitrile butadiene styrene polymer blend based on phase morphology [Volume 16, Issue 52, 2018, Pages 1-13]
  • Ghoreishi, Majid Prediction of residual stress and elasto-plastic strains distribution in disk keyhole laser welding of dissimilar joining between copper & 304 stainless steel [Volume 18, Issue 63, 2020, Pages 151-166]
  • Ghoreishy, Hoda A New Real-Time Optimization-Based Energy Management Strategy for Battery/Supercapacitor Hybrid Storage System in DC Microgrid [Volume 21, Issue 73, 2023, Pages 17-30]
  • Ghourejili, Shamsedin Investigation of effective parameters on hydrodynamics of rotating packed bed using computational fluid dynamics [Volume 17, Issue 59, 2019, Pages 35-45]
  • Gohrrokhi, Ali Evaluation of steel plate shear walls based on performance based plastic design [Volume 15, Issue 51, 2017, Pages 381-396]
  • Golkar, Iman Developing a Model for Estimating the Extraversion Degree of Social Network Members Using the Information Extracted from the Graph Structure [Volume 13, Issue 43, 2016, Pages 91-106]
  • Golmareshk, Mahnaz Determination of Young's modulus of Boron Nitride nano tubes using energy method [Volume 21, Issue 73, 2023, Pages 159-169]
  • Golshan, Mehdi A Modified Brain Emotional Learning Model Inspired By Online Recurrent Memory Sequential Extreme Learning Machine Based On Neural Networks [Volume 20, Issue 70, 2022, Pages 1-21]
  • Goudarzi, Koorosh Estimation of flow temperature in horizontal pipe using analytical inverse heat transfer [Volume 18, Issue 61, 2020, Pages 1-12]

H

  • Habib, Farah Rereading the spatial structure model of middle class housing by using the paradigm of Complex systems theory (CST) [Volume 21, Issue 74, 2023, Pages 255-273]
  • Habibi, Ali Modeling and optimization of a fixed bed catalytic reactor for the cyclohexane dehydrogenation process [Volume 20, Issue 69, 2022, Pages 167-172]
  • Hadad, REINFORCEMENT OPTIMIZATION IN UNSTABLE ROCK SLOPES BY USING THE METHOD OF REINFORCEMENT OF REQUIRED LEVEL [Volume 8, Issue 21, 2010, Pages 15-32]
  • Hadad, REINFORCEMENT OPTIMIZATION IN UNSTABLE ROCK SLOPES BY USING THE METHOD OF REINFORCEMENT OF REQUIRED LEVEL [Volume 8, Issue 21, 2010, Pages 15-32]
  • Hadad, BEARING CAPACITY PREDICTION OF SHALLOW STRIP FOUNDATIONS BASED ON COHESIVE LAYERED SUBSOIL USING ARTIFICIAL NEURAL NETWORKS [Volume 9, Issue 24, 2011, Pages 65-82]
  • Hadad, BEARING CAPACITY PREDICTION OF SHALLOW STRIP FOUNDATIONS BASED ON COHESIVE LAYERED SUBSOIL USING ARTIFICIAL NEURAL NETWORKS [Volume 9, Issue 24, 2011, Pages 65-82]
  • Haddad, Abdolhossein Evaluation of collapse potential of silty sandy soil stabilized with microsilica, bentonite and rice husk ash [Volume 13, Issue 42, 2015, Pages 87-101]
  • Haddad, Tina Equivalent Stiffness Calculation of a Journal Bearing by Analytical Approach for Vibrational Modeling [Volume 17, Issue 59, 2019, Pages 129-139]
  • Haddadi, Morteza Model-based Building Retrofit: Experiences at Sharif University of Technology [Volume 21, Issue 75, 2023, Pages 239-254]
  • Hadianfard, NUMERICAL SIMULATION OF POST-TENSIONED STEEL MOMENT CONNECTIONS AND INVESTIGATION THE ROLE OF CONNECTION PARTS ON ITS BEHAVIOR [Volume 11, Issue 32, 2013, Pages 11-28]
  • Hadianfard, Mohammad Ali Modeling and calculation of period for braced steel structures with semi-rigid joist-floor diaphragms [Volume 14, Issue 45, 2016, Pages 1-15]
  • Hadidi, Amin Effect of the distance between the pipes on the thermal performance of multi-pipe earth-to-air heat exchangers with parallel pipes [Volume 21, Issue 75, 2023, Pages 147-159]
  • HADIPOUR, ALIREZA Instability and Wrinkles in the Bending of elastic sector with analytical WKB method [Volume 20, Issue 71, 2022, Pages 209-217]
  • Hafezi, Reza An Integrated Model to Develop Semi-Quantitative Scenarios Using a hybrid Method Based on Fuzzy Cognitive Map: A Case Study of Iranian Oil Production [Volume 17, Issue 56, 2019, Pages 157-168]
  • Hafezi-Motlagh, Nasser The Mixture of EEG Signal and Ocular Interference Modeling in the Head Volume Conductor [Volume 13, Issue 40, 2015, Pages 115-128]
  • Haghani, Amad Investigation of Nonlinear Vibration Behavior of Piezoelectric Micro-Beam Interacting with Spherical Nano Particles [Volume 15, Issue 48, 2017, Pages 85-98]
  • Haghani, Tofan The study of urban sprawl patterns based on fractal geometry and complexity theory, case study: Region 20 of Tehran [Volume 13, Issue 43, 2016, Pages 79-89]
  • Haghgou, Hamidreza Techno-economic evaluation of using ice storage systems based on the new requirements of the draft of the fourth edition of the National Building Regulations, Article 19 [Volume 18, Issue 63, 2020, Pages 65-72]
  • Haghifam, WIND FARM EFFECTS ON TOTAL TRANSFER CAPABILITY [Volume 10, Issue 30, 2012, Pages 61-75]
  • Haghighat, UPPER BOUND ANALYSIS OF BIMETAL SHEET EXTRUSION PROCESS THROUGH TAPER DIES [Volume 10, Issue 28, 2012, Pages 43-51]
  • Haghighat, ANALYSIS OF AXISYMMETRIC SHEET HYDROFORMING PROCESS [Volume 10, Issue 31, 2012, Pages 49-57]
  • Haghighi Asl, MODELING OF SUBCRITICAL WATER EXTRACTION PROCESS OF MEDICINAL PLANTS [Volume 11, Issue 32, 2013, Pages 83-91]
  • Haghighi Asl, ali Modeling of Petrochemical industries wastewater COD Removal with DOE&ANN [Volume 16, Issue 54, 2018, Pages 295-307]
  • Hajabdollahi, hassan Experimental study on the use of aluminum oxide and copper oxide nanoparticles to improve the thermal hydraulic performance of Peugeot 206 radiator [Volume 20, Issue 68, 2022, Pages 101-112]
  • Hajiabadi, Mohammad Ebrahim Combined preventive and predictive maintenance model of power transformers (Case study: Khorasan Regional Electricity Company) [Volume 17, Issue 56, 2019, Pages 421-439]
  • Hajiabadi, Mohammad Ebrahim An Analytical Model to Evaluate the Effects of Wind Turbine Parameters and the Probabilistic Characteristic of Wind Speed on the Average LMP of the Power Market [Volume 18, Issue 62, 2020, Pages 31-42]
  • Hajiabadi, Mohammad Ebrahim Presenting a fuzzy multi-objective approach for dynamic reconfiguration of the distribution network in the presence of distributed generation units and energy storage systems [Volume 20, Issue 71, 2022, Pages 175-188]
  • Haji Aboutalebi, Farhad Numerical Simulation of Machining Processes by Using Hooputra's Shear Damage Criterion [Volume 15, Issue 49, 2017, Pages 101-109]
  • Hajiaghaei-Keshteli, Mostafa Multi-Objective Closed-loop Supply Chain Considering Vehicles and Solving by New Approaches in Metaheuristics [Volume 17, Issue 59, 2019, Pages 67-85]
  • Hajialimohammadi, EXPERIMENTAL INVESTIGATION OF THE TRANSIENT JET EMANATING FROM THE PROTOTYPE DIRECT GASEOUS INJECTOR [Volume 9, Issue 25, 2011, Pages 21-31]
  • Hajiesmaili, Ehsan An Algorithm for Finding Optimum Distribution of the Turbine Blades Considering the Initial Wheel Unbalance [Volume 14, Issue 47, 2016, Pages 115-125]
  • Hajighorbani, Ramezanali Axisymmetric Elastic stress investigation of a 2D- FGM thick hollow cylinder with new material model [Volume 17, Issue 56, 2019, Pages 111-122]
  • Hajikazemi, Hassan Application of FRP Material in Buckling Restrained Braces. [Volume 15, Issue 50, 2017, Pages 225-236]
  • Haji Kazemi, Hassan Investigation of Wind Pressure on Fabric Structures with Conical Form Using CFD [Volume 15, Issue 51, 2017, Pages 181-195]
  • Hajilouy, NUMERICAL MODELING OF FLOW AROUND CATAMARAN VESSEL AND CALCULATION OF HYRODYNAMIC RESISTANCE BY COMPUTATIONAL FLUID DYNAMICS [Volume 11, Issue 32, 2013, Pages 29-41]
  • Hajipour, Ahmad Localization in IoT by using Fractional Order Chaotic Particle Swarm Algorithm Optimization [Volume 18, Issue 60, 2020, Pages 157-168]
  • Hajipour, Alireza Simulation of a High-Speed Train against a Turbulent Air Flow using Computational Fluid Mechanics Method and Multi-Layer Feed-Forward Neural Network Algorithm [Volume 19, Issue 67, 2021, Pages 119-134]
  • Hajizadeh, Rasoul Compliance of Time Sensitive Network Protocol with the Specifications of MIL-STD-1553B Standard for Aviation Applications [Volume 22, Issue 79, 2024, Pages 99-108]
  • Hajizadeh, Rassoul Modeling the Nosie Jammer on the Different Classes of Telecommunication Systems [Volume 20, Issue 70, 2022, Pages 93-105]
  • Hajizadeh, Rassoul A Classifier Based on K-Nearest Neighbors Using Weighted Summation of Reconstruction Errors [Volume 22, Issue 76, 2024, Pages 55-68]
  • Hajizadeh Aghdam, Abolfazl Numerical study of the flow and heat transfer due to the changing of the burner angle in a П-type boiler [Volume 18, Issue 61, 2020, Pages 139-149]
  • Hajizadeh Aghdam, Abolfazl Analysis and simulation of atmospheric burners of heaters in city gas pressure reduction station [Volume 20, Issue 71, 2022, Pages 165-174]
  • Hajizadeh Aghdam, Abolfazl Simulation of the Behavior of Non-Newtonian Fluids Dissolved in Water Inside Non-Concentric Rotating Cylinders [Volume 22, Issue 77, 2024, Pages 13-24]
  • Hakim pour, Farshad The Assessment and Comparison of a Genetic Algorithm, Simulated Annealing and Cuckoo Optimization Algorithm for Optimization of the Facility Location under Competitive Conditions (Case Study: Banks) [Volume 15, Issue 48, 2017, Pages 231-246]
  • Halaji, Majid Robust synchronization of a class neutral chaotic systems Despite, unknown time-delay and parameter [Volume 21, Issue 75, 2023, Pages 225-238]
  • Hamedi Estakhrsar, NUMERICAL STUDY OF THE EFFECTIVE PARAMETERS ON THE PERFORMANCE OF EDDY INTERACTION MODEL FOR A WAVE-PLATE MIST ELIMINATOR [Volume 10, Issue 31, 2012, Pages 69-84]
  • Hamidi, NUMERICAL MODELING OF GROUND VIBRATIONS DUE TO DYNAMIC COMPACTION PROCESS IN DRY SANDS [Volume 11, Issue 32, 2013, Pages 1-9]
  • Hamidi, Abdolsamad Automatic Speaker Recognition based on Gabor Features and Convolutional Neural Networks [Volume 21, Issue 72, 2023, Pages 49-67]
  • Hamidi, Abdolsamad Speaker Recognition Using Convolutional Neural Network and Neutrosophic [Volume 21, Issue 75, 2023, Pages 1-18]
  • Harbi, Reza Thermodynamic simulation of a wind turbine-fuel cell hybrid system with application in a distributed generation system [Volume 16, Issue 53, 2018, Pages 25-37]
  • Harimi, Ali improving speech emotion recognition via gender classification [Volume 15, Issue 48, 2017, Pages 183-200]
  • Harounabadi, Ali A hybrid method for community detection based on user interactions, topology and frequent pattern mining [Volume 21, Issue 75, 2023, Pages 129-145]
  • Harsini, Iraj Investigation of the layout of kilowatt-scale wind turbines located among megawatt-scale ones by means of an analytical model [Volume 20, Issue 70, 2022, Pages 161-177]
  • Hasanabadi, BEARING CAPACITY PREDICTION OF SHALLOW STRIP FOUNDATIONS BASED ON COHESIVE LAYERED SUBSOIL USING ARTIFICIAL NEURAL NETWORKS [Volume 9, Issue 24, 2011, Pages 65-82]
  • Hasani, Aliakbar Two Stage Stochastic Programing Based on the Sample Average Approximation and Accelerated Benders Decomposition for Designing Closed-loop Supply Chain Network Design under Uncertainty [Volume 15, Issue 49, 2017, Pages 217-234]
  • Hasani, Ali akbar A Hybrid Metaheuristic Algorithm for Robust Two-stage Flexible Flow Shop scheduling with Dedicated Assembly Lines under Uncertainty [Volume 15, Issue 50, 2017, Pages 25-47]
  • Hasanzadeh, Maryam Cogeneration system based on combined Brayton and inverse Brayton cycle based on biogas fuel [(Articles in Press)]
  • Hashemi Majd, Mahsa A Systematic Literature Review on Software Reliability Modeling [Volume 15, Issue 50, 2017, Pages 285-313]
  • HashemiNejad, AERO-HYDRO-ELASTIC SIMULATION OF TENSION LEG PLATFORM WIND TURBINE [Volume 10, Issue 30, 2012, Pages 1-17]
  • Hasibi Taheri, A.A. DYNAMIC ANALYSIS OF SATELLITE SEPARATION USING RETRO ROCKET FOR INJECTION WITH INITIAL ROTATION IN ORBIT [Volume 12, Issue 36, 2014, Pages 17-27]
  • Hassani, Behrooz Location of Optimal Stress Points in Isogeometric Analysis [Volume 13, Issue 40, 2015, Pages 151-167]
  • Hassani, reza Finite elements analysis of a New Moment-Resistant Connection in Precast Concrete Frames under cyclic loading [Volume 15, Issue 49, 2017, Pages 189-200]
  • Hassanifard, Soran Investigating the effect on the position in advancing and retreating side on the mechanical properties of the joint samples in the friction stir welding of 6061 and 5054 aluminum alloys [Volume 17, Issue 57, 2019, Pages 265-272]
  • Hassanifard, Soran Development and modification of the thermal model of the friction stir welding process with an eccentric pin [Volume 18, Issue 62, 2020, Pages 1-12]
  • Hatami, Arash Control of Horizontal Axis Wind Turbine with Synchronous Generator to Capture Maximum Energy of Wind [Volume 16, Issue 54, 2018, Pages 403-413]
  • Hatami, Hossein An Experimental Investigation on the Effects of MQL Method on Grinding of Nickel Based Superalloy 738 (Inconel 738) [Volume 21, Issue 74, 2023, Pages 125-151]
  • Hatami, Shahabedin Lateral behavior of cold-formed steel framed shear walls with steel sheet sheathing using FE method [Volume 13, Issue 40, 2015, Pages 129-150]
  • Hatami Lourzini, Ehsan Progressive Collapse Analysis of Moments Resisting Frames with Cruciform Columns Semi-Buried in Concrete [Volume 19, Issue 64, 2021, Pages 117-127]
  • Hedayati, Ehsan Modeling the Risks of Blockchain Development in Improving the Resilience of the Medical Equipment Supply Chain [Volume 22, Issue 78, 2024, Pages 141-156]
  • Heidari, Ali APPROXIMATE EIGENVALUE OF PLATE BY ARTIFICIAL NEURAL NETWORKS [Volume 11, Issue 35, 2013, Pages 49-62]
  • Heidari, Hanieh Numerical and experimental study of different geometries of expansion-contraction microchannels in particle sorting [Volume 20, Issue 68, 2022, Pages 113-125]
  • Heidari, Mohammad Comparison of back propagation neural network with hybrid back propagation-wavelet network for breast cancer diagnosis, based on statistical features extracted from thermographic images of women's breasts. [Volume 21, Issue 74, 2023, Pages 51-64]
  • Heidari, yaghoob A COMPARATIVE ANALYSIS OF ARTIFICIAL BEE COLONY AND PARTICLE SWARM OPTIMIZATION SWARM INTELLIGENCE ALGORITHMS IN DESIGN A FRACTIONAL FUZZY PID CONTROLLER AND IMPLEMENTATION ON DC MOTOR [Volume 11, Issue 35, 2013, Pages 11-23]
  • Heidari-Rarani, Mohammad Exact solution for frequency equations of radial and transverse vibration of a circular plate with various boundary conditions [Volume 15, Issue 50, 2017, Pages 169-178]
  • Heidarzadeh, Hamid Design and simulation of a quantum dot-based optical using selective energy contacts to simultaneous detection of multi-wavelengths [Volume 20, Issue 70, 2022, Pages 23-31]
  • Hekmat Nazemi, MODELLING OF FCC PROCESS BASED ON CLUSTER SIZE VARIATION ALONG THE RISER [Volume 10, Issue 30, 2012, Pages 87-97]
  • Hemati, Mohammad Reza Analytical Investigating of the Pattern of Yielding Initiation for a Rotating Hallow FGM Cylinder [Volume 13, Issue 43, 2016, Pages 25-38]
  • Hemmat esfe, Mohammad Thermal Behavior of TiO2 (85%) / MWCNT (15%) - (CH2OH) 2 (50%) / H2O (50%) Hybrid Nanofluid under the Influence of Temperature and Volume Fraction Factors with Laboratory and Response Surface Methods [Volume 22, Issue 77, 2024, Pages 25-36]
  • Hemmat Esfe, NUMERICAL SIMULATION OF MIXED CONVECTION OF FLUID FLOW AND HEAT TRANSFER WITHIN CAR RADIATOR WITH AN INSIDE HOT OBSTACLE FILLED WITH NANOFLUID [Volume 9, Issue 25, 2011, Pages 33-46]
  • Hemmat Esfe, EVALUATION OF MIXED CONVECTION HEAT TRANSFER AND THERMAL CHARACTERISTIC AROUND TWO HEATED OBSTACLES IN INCLINED SQUARE CAVITY SUBJECTED TO A NANOFLUID [Volume 10, Issue 28, 2012, Pages 31-42]
  • Hemmat Esfe, FLOW BEHAVIOR AND THERMAL PERFORMANCE OF DOUBLE LID-DRIVEN CAVITY SUBJECTED TO NANOFLUID WITH VARIABLE PROPERTIES [Volume 10, Issue 30, 2012, Pages 43-60]
  • Hemmat Esfe, M. NUMERICAL INVESTIGATION OF NATURAL CONVECTION AROUND A CIRCULAR CYLINDER PLACED IN A CAVITY FILLED WITH NANOFLUID BY CHANGING THE LOCATION AND RADIUS [Volume 11, Issue 33, 2013, Pages 57-68]
  • Hemmat Esfe, Mohammad Artificial neural network modeling for prediction of thermal conductivity of functionalized MWCNTs/water nanofluids and a new empirical correlation [Volume 16, Issue 53, 2018, Pages 67-73]
  • Hemmati, INVESTIGATION OF TRANSITION STORY EFFECT ON BEHAVIOR OF VERTICALLY HYBRID BUILDINGS [Volume 9, Issue 26, 2011, Pages 57-65]
  • Hemmati, Mohammad Hybrid Robust Stochastic Bidding Strategy for Wind Farms Integrated with Compressed Air Energy Storage and Power to Gas Technology [Volume 19, Issue 65, 2021, Pages 137-148]
  • Hemmatian, OPTIMIZATION OF PRISMATIC CORE SANDWICH PANEL BASED ON PARTICLE SWARM ALGORITHM [Volume 8, Issue 20, 2010, Pages 17-26]
  • Hemmatpour Khotbesara, Mohammad Amin Mechanical Properties Analysis of a Monolayer Biphenylene at Different Temperatures [Volume 22, Issue 76, 2024, Pages 177-187]
  • Hesam, Abed Scheduling of jobs and maintenance activities in an unrelated parallel machines environment [Volume 17, Issue 58, 2019, Pages 233-247]
  • Hesami, Reshad An Investigation into the Relationships Determining Ball Trajectory in Mills by Using the Physical Modelling [Volume 17, Issue 58, 2019, Pages 203-214]
  • Hesami, Saeid Scheduling optimization of highway construction projects based on Lean thinking [Volume 13, Issue 40, 2015, Pages 33-42]
  • Hesamian, Gholamreza A Proposed Method for Fuzzy Ranking in Multi-Attribute Decision-Making in Type-2 Fuzzy Environments [Volume 17, Issue 59, 2019, Pages 47-65]
  • Hesami Naghshbandy, Ali Solving Transmission Expansion Planning problem to Mitigate Cascading Failure Impacts using Transmission Network Vulnerability Analysis and Assessment approach [Volume 17, Issue 58, 2019, Pages 143-157]
  • Hesami Naghshbandy, Ali Real time Vulnerability Assessment in Cascading Failure Analysis Using an Intelligence Monitoring Model [Volume 18, Issue 63, 2020, Pages 97-111]
  • Heydari, DESIGN AND SIMULATION OF A MULTILAYER SOI-MOSFET STRUCTURE FOR IMPROVING SELF-HEATING EFFECTS [Volume 8, Issue 23, 2011, Pages 19-23]
  • Heydari, Jafar A mathematical model for coordinating corporate social responsibility and order quantity in pharmaceutical supply chain [Volume 15, Issue 50, 2017, Pages 245-260]
  • Heydari, Reza Risk-constrained transmission network expansion planning in competitive electricity markets considering expected energy not supplied and wind curtailment [Volume 20, Issue 70, 2022, Pages 209-223]
  • Heydari Dehcheshmeh, Saeed Numerical Investigation of the Effect of Geometric Parameters of Nozzles on the Performance of Flameless Combustion of natural gas and NOx [Volume 18, Issue 60, 2020, Pages 245-256]
  • Heydarnezhad, Elahe Robust optimization of a discrete time-cost-environment trade-off problem by considering uncertainty in time and cost [Volume 17, Issue 58, 2019, Pages 215-232]
  • Homayoun Arya, Shima Proposing an Integrated Time-Cost Management Model based on Building Information Modeling (BIM) and Blockchain Technology (BCT) Smart contract Development Approach in the Construction Industry [Volume 21, Issue 74, 2023, Pages 191-206]
  • Honarbakhsh Raouf, abbas FINITE ELEMENT SIMULATIONS OF HEAT TRANSFER IN FRICTION STIR WELDING OF AL 6061 [Volume 11, Issue 35, 2013, Pages 1-9]
  • Honarvar, Farhang Modeling of ultrasonic testing Time of Flight Diffraction (ToFD) technique by Finite Element Method [Volume 13, Issue 41, 2015, Pages 13-26]
  • Hooshmand, Abbas An Integrated Interlinking Converter with DC link Voltage Balancing Capability for Bipolar Hybrid Microgrid [Volume 18, Issue 60, 2020, Pages 201-216]
  • Hoseinalizadeh Toni, Morteza Free vibration analysis of semi-rigid frames with elastic rotational restraints and inhomogeneous members [Volume 17, Issue 58, 2019, Pages 187-202]
  • Hoseini, Farnaz Normal and Abnormal Masses Detection in Mammography Images Using Deep Convolutional Neural Network (DCNN) [Volume 22, Issue 79, 2024, Pages 29-43]
  • Hoseini, Seyed Manoochehr Improving Performance of Germanium-Based Vertical Tunneling Field Effect Transistor Using GaAs as Channel [Volume 22, Issue 76, 2024, Pages 115-122]
  • Hoseini Vaez, Seyed Rohollah Estimating Maximum Rotation of Beam of R.C. Moment‐resisting Frames Using Equivalent Pulses of Near-fault Motions [Volume 15, Issue 50, 2017, Pages 193-210]
  • Hoseini Vaez, S.R. EVALUATION OF BASE-ISOLATOR TYPE DISTRIBUTION IN LOW-RISE BUILDINGS [Volume 14, Issue 44, 2016, Pages 105-115]
  • Hoseinpour Gollo, Mohamad Study of the Effective Parameters in Laser Forming of Steel Sheets [Volume 16, Issue 52, 2018, Pages 41-52]
  • Hoseyni, Shahab MOST STABLE MOTION DESIGN OF THE MOBILE ROBOT IN THE SPECIFIED PATH [Volume 11, Issue 33, 2013, Pages 1-14]
  • Hossein Ali Beigy, Morteza Damage detection in steel structures using static data via Genetic Algorithm [Volume 13, Issue 41, 2015, Pages 147-158]
  • Hosseinbeig, Ahmad Analysis of a Microstrip Wide Band Antenna by Solving Volume-Surface Integral Equations [Volume 14, Issue 46, 2016, Pages 151-160]
  • Hosseini, STUDY OF EFFECT OF CUPPER CORE ON TEMPERATURE AND EROSION OF ELECTRODE [Volume 9, Issue 25, 2011, Pages 1-9]
  • Hosseini, INTRODUCTION OF AN ELECTROMAGNETIC ANTI-LOCK BRAKING SYSTEM (EMBAS) AND COMPARISON OF ITS OPERATION WITH ANTI-LOCK BRAKING SYSTEM (ABS) [Volume 9, Issue 26, 2011, Pages 67-78]
  • Hosseini, Azhin Hybrid Robust Stochastic Bidding Strategy for Wind Farms Integrated with Compressed Air Energy Storage and Power to Gas Technology [Volume 19, Issue 65, 2021, Pages 137-148]
  • Hosseini, Hossein Numerical Study of Wall-to-Bed Heat Transfer in a Gas–Solid Bubbling Fluidized Bed by CFD [Volume 14, Issue 46, 2016, Pages 123-136]
  • Hosseini, Majid Estimation of parameters of a laboratory attitude control simulator using least squares method and hybrid intelligent optimization [Volume 20, Issue 69, 2022, Pages 29-39]
  • Hosseini, Maryam Optimizing the coefficients of the particle swarm optimization algorithm to solve the problem of economic dispatching to reduce the emission of environmental pollutants [Volume 21, Issue 75, 2023, Pages 297-307]
  • Hosseini, Maryam Adjustment of Optimal Parameters to Control the Temperature in Different Conductors [Volume 22, Issue 77, 2024, Pages 107-116]
  • Hosseini, Mojtaba Experimental Studies on Energy Absorption of Curved Steel Sheets under Impact Loading and the Effect of Pendentive on the Deformation of Samples [Volume 18, Issue 63, 2020, Pages 27-40]
  • Hosseini, Rahil An Intelligent Hybrid Segmentation Model Based on Fuzzy Logic, Discrete Wavelet Transform In Digital Imaging for Detection of Gastric Cancer [Volume 18, Issue 63, 2020, Pages 131-150]
  • Hosseini, Siavash Increasing efficiency of two-phase flowmeters using frequency-domain feature extraction and neural network in the detector output spectrum [Volume 19, Issue 67, 2021, Pages 47-57]
  • Hosseini, Soodeh HD-SEIRS Malware Propagation Model in Heterogeneous Complex Networks [Volume 22, Issue 79, 2024, Pages 17-28]
  • Hosseini,, Seyed Ali Investigation of effective parameters on capturing particles by secondary flows in rectangular microchannels [Volume 19, Issue 65, 2021, Pages 15-27]
  • Hosseini,, Seyed Ali Numerical and experimental study of different geometries of expansion-contraction microchannels in particle sorting [Volume 20, Issue 68, 2022, Pages 113-125]
  • Hosseini almadvari, Raziehsadat Study of the electronic and optical properties of doped gallium sulfide monolayer by first principles calculations [Volume 20, Issue 68, 2022, Pages 47-58]
  • Hosseini-Chaleshtori, Shahram Exact solution for frequency equations of radial and transverse vibration of a circular plate with various boundary conditions [Volume 15, Issue 50, 2017, Pages 169-178]
  • Hosseini Montazer, Babak A Generalized Bidirectional Structure for Multi-Level Inverter with Low Number of Power Electronic Devices [Volume 19, Issue 66, 2021, Pages 37-51]
  • Hosseini Moorderaz, Ahmad Damage Evaluation of Concrete Bridge with Steel Piers Subjected to Explosive Loads [Volume 22, Issue 78, 2024, Pages 297-316]
  • Hosseini-Motlagh, Seyyed-Mahdi A mathematical model for coordinating corporate social responsibility and order quantity in pharmaceutical supply chain [Volume 15, Issue 50, 2017, Pages 245-260]
  • Hosseini-Motlagh, Seyyed-Mahdi Presenting a Model and Heuristic Algorithm for Two-Echelon Location-Routing Problem under Uncertainty Considering the Simultaneous Pickup and Delivery [Volume 16, Issue 53, 2018, Pages 339-361]
  • Hossein Nezhad, Alireza Numerical and Experimental Study of Ventilation Effects on Ventilated Cavitating Flow [Volume 15, Issue 51, 2017, Pages 29-41]
  • Hosseinpour, Majid A Novel Multilevel Inverter Topology Aiming Reduction the Switch Count and Converter Cost [Volume 18, Issue 60, 2020, Pages 71-85]
  • Hosseinpour, Majid Indirect vector control of three phase induction motor based on a 2/3 level inverter [Volume 18, Issue 60, 2020, Pages 127-141]
  • Hosseinpour, Majid A Transformerless High Step-up DC-DC Converter Based on Active Switched Capacitor Network [Volume 19, Issue 66, 2021, Pages 23-36]
  • Hosseinpour, Majid A Generalized Bidirectional Structure for Multi-Level Inverter with Low Number of Power Electronic Devices [Volume 19, Issue 66, 2021, Pages 37-51]
  • Hosseinpour, Majid Design and Analysis of Grid-tied PV Power conditioning System Through LCL filter based on Capacitor Current Active Damping with Positive Output Virtual Impedance [Volume 21, Issue 74, 2023, Pages 1-19]
  • Hosseinpour, Majid A Novel Multi-Level Cascade Inverter with Reduced Switching Devices to Connect Renewable Energy Sources to the Grid [Volume 21, Issue 74, 2023, Pages 95-111]
  • Hosseiny, SYSTEM DYNAMIC MODELING OF MULTIPURPOSE RESERVOIR OPERATION TO ESTIMATE THE OPTIMAL HEIGHT OF THE DAM [Volume 8, Issue 21, 2010, Pages 57-65]
  • Hosseinzadeh, Mohammad Ali A Classifier Based on K-Nearest Neighbors Using Weighted Summation of Reconstruction Errors [Volume 22, Issue 76, 2024, Pages 55-68]
  • Hosseinzadeh, Seyed Amir Hamed Multi-objective optimization of average travel time for a metro line by considering both location and dispersion effects [Volume 16, Issue 52, 2018, Pages 331-345]
  • Hosseinzadeh Saljooghi, Faranak Cost-Effectiveness and Economies of scope on network processes with shared resources and resources recovered from undesirable output [Volume 19, Issue 67, 2021, Pages 135-150]
  • Hosseyni Andargoli, Seyed Mehdi Modeling the Nosie Jammer on the Different Classes of Telecommunication Systems [Volume 20, Issue 70, 2022, Pages 93-105]
  • Hossinzadeh Saljooghi, Faranak Cost efficiency and return to scale in a two-stage network supply chain: Case study of drink companies in Iran [Volume 16, Issue 55, 2018, Pages 63-76]
  • Husseinzadeh Kashan, Ali Revenue Management Under Variable Resource Capacity Requirements and Importance Factor for Patient Classes in Hospitals [Volume 16, Issue 54, 2018, Pages 257-265]

I

  • Ildarabadi, Rahim Intelligent consumption management of residential buildings with the help of energy hub in the presence of multiple energy carriers [Volume 21, Issue 74, 2023, Pages 21-35]
  • Iman-Eini, Hossein Control of Induction Motor Drive based on Nested Neutral Point Clamped Inverter using Finite Control-Set Model Predictive Method [Volume 21, Issue 74, 2023, Pages 275-290]
  • Imani, Amir A New Fault Detection and Classification Scheme in MTDC Grids with Hybrid Cable and Overhead Transmission Line [Volume 22, Issue 76, 2024, Pages 141-154]
  • Irani, Hamidreza Energy Absorption of Auxetic Metallic Yield Damper Made of Shape Memory Alloys [Volume 22, Issue 77, 2024, Pages 79-93]
  • Iranmanesh, Faezeh Investigation on Adding Passive Toe Joints to the Feet Structure of 2D Humanoid Robot [Volume 16, Issue 53, 2018, Pages 157-170]
  • Iravani, Mostafa Modeling of Polymer Associated Low Salinity Waterflooding by Fractional Flow Theory [Volume 17, Issue 56, 2019, Pages 213-222]
  • Izadfar, Hamid Reza Calculation of Rotor’s Current and MMF in a Squirrel Cage Induction Machine [Volume 16, Issue 52, 2018, Pages 163-170]
  • Izadinasab, Ahmad Control of Sensorless PMSM using State Dependent Model Reference Adaptive System and Adaptive Augmented Observer [Volume 18, Issue 63, 2020, Pages 85-95]
  • Izadpanah, Mohammad Numerical Analysis of Collapse of Polyurethane Foam Filled Composite Tubes Under Pressure Loading at Different Speeds [Volume 21, Issue 74, 2023, Pages 113-124]

J

  • J, M Settings in Employing Simulation Tools for Fast Determination of Time to Voltage Instability [Volume 16, Issue 55, 2018, Pages 401-410]
  • Jaafari, Meisam Planning of Fast Charging Station for Electric Vehicles Equipped With Renewable Energy Sources and Energy Storage System Considering Economic and Environmental Objectives [Volume 22, Issue 77, 2024, Pages 245-259]
  • Jabbari, CALCULATION OF REDUCTION IN HEAT TRANSFER BETWEEN ENGINE AND VEHICLE BODY ROOM USING RADIATION SHIELDS WITH TEMPERATURE- DEPENDENT EMISSIVITY [Volume 9, Issue 25, 2011, Pages 11-19]
  • Jabbari, ANALYTICAL AND NUMERICAL INVESTIGATION OF WIRE-WINDING PROCESS EFFECT IN REINFORCEMENT OF CNG VESSELS TYPE II [Volume 9, Issue 26, 2011, Pages 49-55]
  • Jabbari, REDUCTION IN HEAT TRANSFER BETWEEN TWO CONCENTRIC CYLINDERS, THICK AND LONG USING THICK RADIATION SHIELDS WITH TEMPERATURE- DEPENDENT EMISSIVITY [Volume 9, Issue 27, 2011, Pages 61-71]
  • Jabbari, Hamed A New Capsule Generative Adversarial Network for Imbalanced Classification of Human Sperm Images [Volume 21, Issue 73, 2023, Pages 279-294]
  • Jafari, DESIGN AND IMPLEMENTATION OF AN IDSS CONFLICT RESOLVER USING DIFFERENT VIEW POINTS [Volume 8, Issue 22, 2010, Pages 1-12]
  • Jafari, Alireza The effect of the friction pendulum isolation system on the seismic response of structures located on different types of soils [Volume 20, Issue 68, 2022, Pages 1-14]
  • Jafari, Iman Droplet Breakup with Unequal sized in Symmetric Y-junction Microchannel [Volume 20, Issue 70, 2022, Pages 79-91]
  • Jafari, Mehdi A flexible effort estimator model based on ASO algorithm [Volume 21, Issue 73, 2023, Pages 1-16]
  • Jafari, Mohsen A NEW LOAD PATTERN FOR PUSHOVER ANALYSIS OF BASE-ISOLATED STRUCTURES [Volume 12, Issue 39, 2014, Pages 61-74]
  • Jafari, Ramin Seismic Risk Assessment of Hamedan City [Volume 16, Issue 55, 2018, Pages 247-266]
  • Jafarian, Optimising the Abrasive Water Jet Cutting of Glass Using Artificial Neural Network and Genetic algorithm [Volume 8, Issue 23, 2011, Pages 25-35]
  • Jafarian, Farshid Determination of Johnson-Cook equation constants for simulation of machining process using the optimization algorithm [Volume 17, Issue 57, 2019, Pages 315-325]
  • Jafari Nikpey, Morteza A Multi-Period Mathematical Model to Optimize Smart Home Energy Management with Scheduling of Appliances and Solar Cell Cost Calculation [Volume 22, Issue 77, 2024, Pages 129-156]
  • Jafari Nodoshan, GEOMETRY OPTIMIZATION OF TRIANGLE LABYRINTH SPILLWAY USING ANFIS MODELS AND GENETIC ALGORITHMS [Volume 7, Issue 19, 2009, Pages 57-68]
  • Jafari nokandi, Meysam Clearing for Coordinated Electricity and Gas Markets [Volume 19, Issue 64, 2021, Pages 53-66]
  • Jafarnia Dabanloo, Nader A minimal electrophysiological model of gastric smooth muscle cell based on effective ionic currents [Volume 19, Issue 67, 2021, Pages 181-189]
  • J. Afshari, Ahmad A Mathematical Model to Optimize the Operation of a Gas Distribution Network [Volume 14, Issue 44, 2016, Pages 93-104]
  • Jahan Abadi, Mojtabaa Estimating Maximum Rotation of Beam of R.C. Moment‐resisting Frames Using Equivalent Pulses of Near-fault Motions [Volume 15, Issue 50, 2017, Pages 193-210]
  • Jahandar Lashaki, Mohammad Spider web structure as high impedance surfaces [Volume 12, Issue 38, 2014, Pages 75-82]
  • Jahangir, Mohammad Hossein Determination of the lens water content for several different configurations of elliptical particles in unsaturated soils [Volume 16, Issue 52, 2018, Pages 267-276]
  • Jahangir, V. SURFACE MELTING PHENOMENA MODELING OF DIFFERENT CRYSTALLOGRAPHIC PLANES, LAYER BY LAYER FOR COPPER [Volume 12, Issue 36, 2014, Pages 43-52]
  • Jahangiri, Ali Modeling Growth of A Vapor Film Formed in Contact between Hot Metallic Sphere and Water in The Pressure Vessels [Volume 13, Issue 40, 2015, Pages 89-101]
  • Jahangiri, Ali Failure analysis of stationary blades in a gas turbine compressor [Volume 16, Issue 54, 2018, Pages 351-360]
  • Jahangiri, Ali Modeling the one-dimensional inverse heat transfer problem using a Haar wavelet collocation approach [Volume 17, Issue 56, 2019, Pages 293-302]
  • Jahangiri, Ali Strength analysis of the horizontal stabilator torque box of time-worn aircraft in order to estimate the remaining life and its lifetime by the finite element method [Volume 17, Issue 56, 2019, Pages 389-405]
  • Jahangiri, Mehdi Investigation of Nonlinear Vibration Behavior of Piezoelectric Micro-Beam Interacting with Spherical Nano Particles [Volume 15, Issue 48, 2017, Pages 85-98]
  • Jahangoshai Rezaee, Mustafa An integrated model for selecting efficient suppliers in a competitive environment under uncertain demand [Volume 15, Issue 51, 2017, Pages 299-317]
  • Jahromi, Mehdi DEVELOPMENT OF A DYNAMIC MODEL FOR SIMULATION OF REAL-TIME TRANSIENT TURBOJET ENGINE PERFORMANCE IN SIMULINK [Volume 15, Issue 50, 2017, Pages 95-108]
  • Jalali, ON THE FINITE ELEMENT MODELING OF RC BEAMS SHEAR-STRENGTHENED USING NSM-FRP [Volume 7, Issue 19, 2009, Pages 69-84]
  • Jalali, STUDY OF DIFFERENT CONTACT ELEMENTS IN POUNDINGS OF STEEL BUILDINGS [Volume 9, Issue 24, 2011, Pages 1-20]
  • Jalili, Mohammad Mahdi Analytical solution of nonlinear rolling motion of ship using the method of multiple scales [Volume 15, Issue 49, 2017, Pages 125-137]
  • Jalilian, Alireza Identification of Harmonic Order Effective in Neutral Power Losses by Matrix Pencil Method [Volume 17, Issue 58, 2019, Pages 159-170]
  • Jalilnejad, Elham Modeling and Simulation of pervaporation membrane reactor during levulinic acid esterification process with ethanol to produce ethyl levulinate: computational fluid dynamic (CFD) analysis [Volume 19, Issue 67, 2021, Pages 235-243]
  • Jalilvand, Abolfazl Assessment security protection system the distribution network in presence of distributed generation using Petri net [Volume 14, Issue 44, 2016, Pages 129-142]
  • Jalilvand, Abolfazl Sensor-less Predictive Control of Induction Motor with Super-Twisting Sliding Observer and Fuzzy Adaptive Estimator [Volume 19, Issue 66, 2021, Pages 53-63]
  • Jamasb, Shahriar Comprehensive Modeling of the Depletion-mode MOS Capacitor for Circuit Simulation [Volume 18, Issue 62, 2020, Pages 43-56]
  • Jamasb, Shahriar Modeling the Influence of a Steady Magnetic Field on Action Potential Generation in Neurons [Volume 19, Issue 64, 2021, Pages 87-93]
  • Jamshidi Moghadam, P. FREE VIBRATION ANALYSIS OF CRACKED POST-BUCKLED BEAM BY DIFFERENTIAL QUADRATURE METHOD [Volume 11, Issue 34, 2013, Pages 1-16]
  • Jannat, D. PATH PLANNING OF TRACTOR-TRAILER ROBOT BY FAST MARCHING METHODE (FMM) [Volume 11, Issue 34, 2013, Pages 31-47]
  • Javadpour, SHAPE OPTIMIZATION OF SUPERSONIC WIND TUNNEL DIFFUSER USING GENETIC ALGORITHM [Volume 10, Issue 28, 2012, Pages 19-29]
  • Javadpour, Seyed Morteza Numerical and Experimental Study of Ventilation Effects on Ventilated Cavitating Flow [Volume 15, Issue 51, 2017, Pages 29-41]
  • Javan, STUDY OF EFFECT OF CUPPER CORE ON TEMPERATURE AND EROSION OF ELECTRODE [Volume 9, Issue 25, 2011, Pages 1-9]
  • Javan Jafari, Abbas A Systematic Review of Intrusion Detection using Hidden Markov Models: Approaches, Applications, and Challenges [Volume 16, Issue 53, 2018, Pages 183-206]
  • Javanmardi, Jafar Simulation and Modification of The Process at The Gas Compression Station to Reduce Fuel Consumption and Environmental Pollution [Volume 18, Issue 62, 2020, Pages 83-97]
  • Javanshir, Khodabakhsh Non-invasive Determination of Ankle Rotation Axes Using a Robotic Gyroscopic Mechanism [Volume 21, Issue 75, 2023, Pages 193-204]
  • Javidrad, DEVELOPMENT OF A REVERSE ENGINEERING PROCEDURE FOR UPGRADING AND MANUFACTURING OF LEGACY MECHANICAL AND STRUCTURAL COMPONENTS [Volume 10, Issue 28, 2012, Pages 69-82]
  • Jazaeri, DESIGN OF STATE ESTIMATOR AND BAD DATA DETECTION MODULE IN POWER SYSTEM BY USING PERCEPTRON ARTIFICIAL NEURAL NETWORK [Volume 9, Issue 26, 2011, Pages 13-22]
  • Jenabzadeh, Mohammad Reza VNR_CCP: A New Approach to Congestion Control Using Virtualization Technique and Switch Migration in SDN [Volume 22, Issue 76, 2024, Pages 85-98]
  • Jokar, Abbas Presenting a Model and Heuristic Algorithm for Two-Echelon Location-Routing Problem under Uncertainty Considering the Simultaneous Pickup and Delivery [Volume 16, Issue 53, 2018, Pages 339-361]
  • Jokar, Seyyed Mohammad Simulation and Modification of The Process at The Gas Compression Station to Reduce Fuel Consumption and Environmental Pollution [Volume 18, Issue 62, 2020, Pages 83-97]
  • Jormand, Zahra VMRCD: an algorithm for dependable routing using the re-clustering for vehicular networks with v2v communication [Volume 20, Issue 71, 2022, Pages 87-99]
  • Juzdani, Gholam Reza Mechanistic modeling of cutting forces in end milling with the direct cutting edge [Volume 18, Issue 61, 2020, Pages 151-166]

K

  • Kaedi, Marjan Developing a Model for Estimating the Extraversion Degree of Social Network Members Using the Information Extracted from the Graph Structure [Volume 13, Issue 43, 2016, Pages 91-106]
  • Kafi, mohammad Ali Effects Of Rib Plates And Haunch On The Behavior Welded Prequalified Moment Connections Under Cyclic Loading [Volume 16, Issue 52, 2018, Pages 237-252]
  • Kafi, Mohammad Ali The Use of U Plates as Continuity plates of Box Column in Steel Structures Under Cyclic Loading [Volume 16, Issue 55, 2018, Pages 311-320]
  • Kalateh, Farhoud Application of Monte Carlo Simulation (MCS) and Fuzzy Finite Element (FFEM) for Investigating the Uncertainty of Seepage in Homogeneous Earth Dams [Volume 22, Issue 76, 2024, Pages 99-114]
  • Kamani, Kamyar Second law analysis of nanofuid laminar flow in a counter-flow heat exchanger [Volume 13, Issue 41, 2015, Pages 47-57]
  • Kamyab, ebadollah Combined preventive and predictive maintenance model of power transformers (Case study: Khorasan Regional Electricity Company) [Volume 17, Issue 56, 2019, Pages 421-439]
  • Karami-Mollaee, Ali Design of Sliding Mode Controller for Voice Coil Motor Using Nonlinear Observer [Volume 19, Issue 66, 2021, Pages 131-140]
  • Kardan, Ahmad Modeling Users’ Repost Behavior in Online Communities Using a Team of Learning Automata [Volume 17, Issue 59, 2019, Pages 195-214]
  • Kardgar, Tohid Design and Implementation of Integrated Virtual Sensor Simulator Unit for Hardware in the Loop Laboratory of Autonomous Underwater Vehicle [Volume 22, Issue 78, 2024, Pages 233-248]
  • Karimabadi, Ali Combined preventive and predictive maintenance model of power transformers (Case study: Khorasan Regional Electricity Company) [Volume 17, Issue 56, 2019, Pages 421-439]
  • Kari Majidabad, Abbas Stackelberg-Nash Equilibrium in competitive facility location game among a franchisor and two investors [Volume 17, Issue 57, 2019, Pages 111-125]
  • Karimi, Amir Hossein Simulation of Fracture in First Mode Through Debonding of Composite Skin from Elastomeric Foam Core in Sandwich Beams [Volume 22, Issue 77, 2024, Pages 57-67]
  • Karimi, Golnam Proposing a new model for optimal energy management of a residential microgrid with the aim of resiliency and flexibility indexes improvement [Volume 20, Issue 70, 2022, Pages 61-77]
  • Karimi, Mohammadreza Coordination of Wind Power Plants and Energy Storage Devices in Security-Constrained Unit Commitment Problem Using Robust Optimization [Volume 16, Issue 53, 2018, Pages 207-220]
  • Karimi, Mohammad Taghi Design, Modeling and Fabrication of an Active External Orthosis for Rehabilitation of Lower of Peolple with Disability [Volume 17, Issue 56, 2019, Pages 407-420]
  • Karimi, Zahir Numerical and Experimental Investigation on Springback of AL5083-H111 alloy Sheet in Warm U-Bending Conditions [Volume 17, Issue 56, 2019, Pages 13-21]
  • Karimian, Saeed Numerical study of the effect of adding corona discharge based on plasma actuator on flow control performance in a horizontal axis wind turbine with rough surfaces [Volume 21, Issue 74, 2023, Pages 291-303]
  • Karimipour, arash THE INFLUENCE OF GRAVITY ON A MICROFLUIDIC MIXED CONVECTION BY APPLYING LATTICE BOLTZMANN METHOD [Volume 11, Issue 35, 2013, Pages 77-94]
  • Karimipour, Arash Study of the effect of friction rotational damper, viscoelastic and TADAS on the structures seismic behaviour [Volume 17, Issue 59, 2019, Pages 87-107]
  • Karimizad Gohari, EXPERIMENTAL INVESTIGATION AND MODELING OF SIMULTANEOUS HEAT & MASS TRANSFER IN THE HORIZONTAL CHANNEL WITH THE WALL EFFECT [Volume 9, Issue 24, 2011, Pages 83-95]
  • Karimi Zad Gohari, F. COMPARISON OF PERFORMANCE OF RBF AND MLP NEURAL NETWORKS FOR RESULTS OF SIMULTANEOUS HEAT & MASS TRANSFER [Volume 11, Issue 33, 2013, Pages 27-43]
  • Karimizarchi, Mohammad Hossein Modeling cumulative cases of Covid-19 in Yazd city using various time series techniques and machine learning and comparing their efficiency [Volume 21, Issue 75, 2023, Pages 309-323]
  • Karkon, Mohammad The performance investigation of discontinuity definition techniques on numerical solution of crack problems by meshless method [Volume 18, Issue 62, 2020, Pages 115-128]
  • Kashaniniya, alireza Introduction of the structure, modeling and analysis of junctionless heterostructure Si/Si1-xGex transistor [Volume 21, Issue 72, 2023, Pages 109-121]
  • Kashi, NUMERICAL ANALYSIS EFFECT OF AIRCRAFT MAIN GEARS ON THE CRITICAL ZONES OF RUNWAY RIGID PAVEMENT [Volume 10, Issue 29, 2012, Pages 61-70]
  • Kashiha, INVESTIGATION OF STRUCTURAL BEHAVIOR OF POST- TENSIONED SLAB-COLUMN CONNECTION SUBJECTED TO PUNCHING SHEAR [Volume 8, Issue 23, 2011, Pages 37-59]
  • Katanchi, Benyamin Multi-objective feeder reconfiguration problem in the presence of distributed generation sources and capacitors units considering network voltage Security [Volume 21, Issue 73, 2023, Pages 103-118]
  • Kayhani, Mohammad Hasan Analytical Efficiency Comparison of Multi-Layer Composite Pin Fins under the Different Thermal Boundary Conditions [Volume 13, Issue 43, 2016, Pages 67-77]
  • Kazemi, IMPROVEMENT OF INTERNAL COMBUSTION ENGINES COOLING BY CHANGING THE PATTERN OF COOLANT INLET [Volume 9, Issue 25, 2011, Pages 67-75]
  • Kazemi, A CONCEPTUAL MODEL FOR RECOGNITION OF IMPROVEMENT PRIORITIES: INTEGRATING PERFORMANCE GAP AND FUZZY GROUP-AHP [Volume 9, Issue 27, 2011, Pages 1-12]
  • Kazemi, Mohammad Taghi Constitutive Model for Estimating Concrete Strength Using Ultrasonic Test Considering Mixing Ratios [Volume 17, Issue 56, 2019, Pages 367-374]
  • Kazemi, Mostafa Ultimate strength of stiffened plate with pitting corrosion and inclined crack under uniaxial compression [Volume 18, Issue 62, 2020, Pages 143-151]
  • Kazemi, Reza Motion path following coordinated control for in-wheel motor electric vehicle via implementation robust control and optimal control [(Articles in Press)]
  • Kazemian, Amir Hossein Vibration Analysis of Sandwich Panel Structures: A Homogenized Simulation Approach with Modal Analysis [Volume 22, Issue 78, 2024, Pages 17-30]
  • Kazemi-Sanji, Yusef Comprehensive Modeling of Induction Motor Imbalance Condition to ‎Precise Assessment of Steady State Performance Based on Complex ‎Current Unbalance Factor [Volume 19, Issue 66, 2021, Pages 65-78]
  • Kazerooni, Hanif 3D modeling of the cylindrical type electrostatic precipitator for collecting fine diesel particles and controlling the air pollution [Volume 20, Issue 68, 2022, Pages 127-137]
  • Kebriaei, Hamed Designing an Incentive Mechanism to Reward Users for Advertising Content Usage Considering Network Effects [Volume 22, Issue 78, 2024, Pages 259-273]
  • Keramat, Alireza Investigation of the Effects of Viscoelastic Support Properties Simulated by the Generalized Kelvin-Voigt Model on the Axial Vibration of a Rod [Volume 13, Issue 41, 2015, Pages 93-111]
  • Keramati, Abbas Modelling uncertainty in performance appraisal process based on evidence theory and fuzzy theory [Volume 15, Issue 51, 2017, Pages 411-432]
  • Keshavarz, IMPROVEMENT OF INTERNAL COMBUSTION ENGINES COOLING BY CHANGING THE PATTERN OF COOLANT INLET [Volume 9, Issue 25, 2011, Pages 67-75]
  • Keshavarz, Taha A bi-objective optimization model for planning the treatment of cancer cells by volumetric modulated arc therapy [Volume 19, Issue 64, 2021, Pages 95-107]
  • Keshtegar, B. A NEW METHOD FOR ASSESMENT OF THE STRACTURAL RELIABILITY [Volume 12, Issue 36, 2014, Pages 29-42]
  • Keshtegar, Behrooz FIRST OREDR RELIABILITY METHOD OF STRACTURS USINGA IMPRVED HARMONY SEARCH OPTIMIZATION [Volume 15, Issue 51, 2017, Pages 15-27]
  • Keshvari, Saman Data Tarn: A New Approach for Management and Real-Time Analyses of Big Data [Volume 16, Issue 55, 2018, Pages 133-154]
  • Keynia, Farshid A New Hybrid Intelligent Search Method to Find Global Optimal Solution for Engineering Problems [Volume 17, Issue 58, 2019, Pages 81-102]
  • Keynia, Farshid new feature selection method by a semi supervised classification algorithm for time series estimation [Volume 17, Issue 59, 2019, Pages 153-163]
  • Keypour, Reza A novel control strategy for solar-wind hybrid energy systems based on optimal battery charge and discharge limits in various time domain [Volume 16, Issue 55, 2018, Pages 163-173]
  • KH, M Settings in Employing Simulation Tools for Fast Determination of Time to Voltage Instability [Volume 16, Issue 55, 2018, Pages 401-410]
  • Khademizare, Hassan Improvement of DEA approach for clustering credit rating of customer in banks [Volume 13, Issue 41, 2015, Pages 59-74]
  • Khajavi, Mostafa Optimum Design of Corona Ring of Composite Insulators Considering the Effect of Mutual Phases by Monte Carlo and Coordinate Search Intelligente Algorithms [Volume 22, Issue 77, 2024, Pages 189-206]
  • Khajenoori, MODELING OF SUBCRITICAL WATER EXTRACTION PROCESS OF MEDICINAL PLANTS [Volume 11, Issue 32, 2013, Pages 83-91]
  • Khajenoori, Masoud Investigation of Thermodynamic Model for Ceria Promoted Nickel Catalyst Supported on Nanocrystalline MgO in Dry Reforming of Methane [Volume 16, Issue 53, 2018, Pages 389-396]
  • Khajevandi, I. EVALUATION OF EFFECT OF REACTIVE POWER CONTROL STRATEGY BASED ON VOLTAGE TERMINAL OF GENERATORS ON LIMIT INDUCED BIFURCATION AND DYNAMIC VOLTAGE STABILITY MARGIN [Volume 11, Issue 33, 2013, Pages 69-81]
  • Khajevandi, Issa Prediction of operating conditions of the power system considering reactive power limits of generators and dynamic voltage stability margin by using neural network [Volume 15, Issue 51, 2017, Pages 341-350]
  • Khaji, Mehrnoosh Co-optimized bidding strategy of an integrated wind-thermal system in electricity day ahead and reserve market under uncertainties [Volume 21, Issue 75, 2023, Pages 29-51]
  • Khajooei-Gharaei, Masoomeh Performance of the Evolutionary Structural Optimization for Material with Elasto-Plastic Behavior [Volume 15, Issue 50, 2017, Pages 149-167]
  • Khakshoor-Robat, Ali Reza Design of Sliding Mode Controller for Voice Coil Motor Using Nonlinear Observer [Volume 19, Issue 66, 2021, Pages 131-140]
  • Khalaj Monfared, Kourosh Control of Induction Motor Drive based on Nested Neutral Point Clamped Inverter using Finite Control-Set Model Predictive Method [Volume 21, Issue 74, 2023, Pages 275-290]
  • Khaleghi, GEOMETRICAL MODELS FOR OPTIMUM SHAPE OF CONCRETE ARCH DAMS [Volume 8, Issue 20, 2010, Pages 1-15]
  • Khalili, EXPERIMENTAL INVESTIGATION OF THE TRANSIENT JET EMANATING FROM THE PROTOTYPE DIRECT GASEOUS INJECTOR [Volume 9, Issue 25, 2011, Pages 21-31]
  • Khalili, Ali Study on the Nonlinear Behavior of Strengthened RC Frames using Steel Prop and Crub in Connections and Strengthening of Beam and Column [Volume 14, Issue 46, 2016, Pages 25-38]
  • Khalili, Khalil MODELING OF ELECTRICAL DISCHARGE MACHINING PROCESS USING NEURAL NETWORK AND ITS OPTIMIZATION USING FIREFLY ALGORITHM [Volume 12, Issue 37, 2014, Pages 1-14]
  • Khalili, Majid Planning the Production Power of Thermal, Wind and Solar Units Using the Sine Cosine Algorithm [Volume 22, Issue 76, 2024, Pages 257-271]
  • Khalili, S.M.R. EFFECT OF JOINT GEOMETRY ON THE BEHAVIOR AND FAILURE MODES OF SANDWICH T-JOINTS UNDER TRANSVERSE STATIC LOADS [Volume 12, Issue 36, 2014, Pages 85-101]
  • Khalilian, Milad Optimization of composite distal radius fixture using continuum damage mechanics [Volume 21, Issue 75, 2023, Pages 255-267]
  • Khalilian, V. INVESTIGATION NUMERICAL BEHAVIOR STATIC AND DYNAMIC EMBANKMENTS OF RAILWAY CONSTRUCTED BY GEOFOAM [Volume 12, Issue 36, 2014, Pages 65-83]
  • Khalilzadeh, mohammadali The Mixture of EEG Signal and Ocular Interference Modeling in the Head Volume Conductor [Volume 13, Issue 40, 2015, Pages 115-128]
  • Khalokakaie, Reza Observed and Un-Observed Covariate Effects on Baseline Hazard Rate - Case study: Jajarm Bauxite Mine [Volume 17, Issue 59, 2019, Pages 225-243]
  • Khalokakaie, Reza The Application of Frailty Model in Remaining Useful Life Estimation (Case Study: Sungun Copper Mine's Loading System) [Volume 18, Issue 62, 2020, Pages 129-142]
  • Khanahmadi, Mohtasham Damage identification of column under the axial load based on wavelet transform and modal data [Volume 18, Issue 63, 2020, Pages 51-64]
  • Khankalantary, Saeed Infrared thin film photodetector performance improvement using plasmonic nanostructure and ring shape lens [Volume 20, Issue 68, 2022, Pages 225-232]
  • Khanmohammadi, Leila Effect of soil-structure interaction on seismic demands of structures in evaluation and design procedures [Volume 14, Issue 44, 2016, Pages 49-67]
  • Khanzadi, ULTIMATE CAPACITY OF FIXED OFFSHORE PLATFORMS BY STATIC AND DYNAMIC PUSHOVER ANALYSES UNDER ENVIRONMENTAL LOADS [Volume 8, Issue 21, 2010, Pages 1-14]
  • Khatibi, SCALING OF OPERATIONAL MODE SHAPES USING SENSITIVITY ANALYSIS [Volume 7, Issue 19, 2009, Pages 1-10]
  • Khatibi, NUMERICAL AND EXPERIMENTAL CONSIDERATION OF FREQUENCY DOMAIN DECOMPOSITION METHOD FOR MODAL PARAMETERS IDENTIFICATION OF STRUCTURE [Volume 8, Issue 21, 2010, Pages 83-94]
  • Khatibi, CORRECTION OF MASS-LOADING EFFECTS OF ACCELEROMETERS ON THE MEASURED FRFs USING OPTIMIZED MASS CHANGE ALGORITHM [Volume 10, Issue 30, 2012, Pages 19-31]
  • Khatibi, Vahid A flexible effort estimator model based on ASO algorithm [Volume 21, Issue 73, 2023, Pages 1-16]
  • Khavandkar, Meysam Evaluation of Effective Parameters on Bearing Strength of Bolted Joints with GLARE Construction through FEM [Volume 18, Issue 60, 2020, Pages 39-52]
  • Khazaei, Mohammad CFD simulation of the effect of magnetic field on convective heat transfer and ferrofluid flow inside a pipe [Volume 20, Issue 69, 2022, Pages 155-166]
  • Khazaei, Reyhane Script independent offline writer identification from handwriting samples based on texture using wavelet transform in Persian-English languages [Volume 18, Issue 63, 2020, Pages 1-13]
  • Khazaei Nam, Armin Thermodynamic and Exergoeconomic Study of an Absorption-Compression Refrigeration Cycle Driven by a Geothermal Energy Resource [Volume 22, Issue 78, 2024, Pages 59-77]
  • Khazali, Mohsen An Experimental Investigation on the Effects of MQL Method on Grinding of Nickel Based Superalloy 738 (Inconel 738) [Volume 21, Issue 74, 2023, Pages 125-151]
  • Kheiry, Milad Application of Monte Carlo Simulation (MCS) and Fuzzy Finite Element (FFEM) for Investigating the Uncertainty of Seepage in Homogeneous Earth Dams [Volume 22, Issue 76, 2024, Pages 99-114]
  • Kheyri Namin, Omid The Use of U Plates as Continuity plates of Box Column in Steel Structures Under Cyclic Loading [Volume 16, Issue 55, 2018, Pages 311-320]
  • Kheyroddin, INVESTIGATION OF STRUCTURAL BEHAVIOR OF POST- TENSIONED SLAB-COLUMN CONNECTION SUBJECTED TO PUNCHING SHEAR [Volume 8, Issue 23, 2011, Pages 37-59]
  • Kheyroddin, MODELING AND ESTIMATION OF PLASTIC HINGE LENGTH OF RC COLUMNS USING ARTIFICIAL NEURAL NETWORKS [Volume 10, Issue 29, 2012, Pages 1-17]
  • Kheyroddin, Ali Seismic Behavior of Short Columns in RC Structures on Slope Surface [Volume 7, Issue 18, 2009, Pages 59-65]
  • Kheyroddin, Ali Seismic Behavior of Short Columns in RC Structures on Slope Surface [Volume 7, Issue 18, 2009, Pages 59-65]
  • Kheyroddin, Ali INVESTIGATION THE BEHAVIOR AND COMPARISON OF RELIABLE CODES ON CONCRETE-STEEL COMPOSITE COLUMNS [Volume 8, Issue 22, 2010, Pages 37-49]
  • Kheyroddin, Ali SHEAR LAG PHENOMENON IN RC TALL BUILDINGS WITH TUBULAR SYSTEM [Volume 9, Issue 26, 2011, Pages 33-48]
  • Kheyroddin, Ali INVESTIGATION OF TRANSITION STORY EFFECT ON BEHAVIOR OF VERTICALLY HYBRID BUILDINGS [Volume 9, Issue 26, 2011, Pages 57-65]
  • Kheyroddin, Ali Damage Localization and Quantification of Beams Using Wavelet Transform [Volume 12, Issue 39, 2014, Pages 1-11]
  • Kheyroddin, Ali Study on the Nonlinear Behavior of Strengthened RC Frames using Steel Prop and Crub in Connections and Strengthening of Beam and Column [Volume 14, Issue 46, 2016, Pages 25-38]
  • Khezriyan, Najme Numerical Study of the Influences of ZnGeO Buffer on Electrical Features of Cu2O Solar Cell [Volume 20, Issue 71, 2022, Pages 113-119]
  • Khodabakhsh, Hamed Numerical analysis of the effect of tubes distance on the mechanical behavior and energy absorption of nested thin-walled tubes [Volume 14, Issue 45, 2016, Pages 33-47]
  • Khodabakhshi, Mohammad Bagher Comprehensive Modeling of the Depletion-mode MOS Capacitor for Circuit Simulation [Volume 18, Issue 62, 2020, Pages 43-56]
  • KhodaBandehLou, , Ashkan Progressive Collapse Analysis of Moments Resisting Frames with Cruciform Columns Semi-Buried in Concrete [Volume 19, Issue 64, 2021, Pages 117-127]
  • Khodaei, Reza Query expansion using the clustering of pseudo relevant documents with query sensitive similarity [Volume 14, Issue 47, 2016, Pages 243-254]
  • Khodayari, Aliasghar Simultaneous optimization of cut-off grade and capacity of mineral processing plant [Volume 15, Issue 49, 2017, Pages 235-244]
  • Khomami Abadi, Morteza Analytical and Numerical Modeling of Stress Intensity Factor in I-Shaped Cross Sections of Cracked Beams [Volume 17, Issue 56, 2019, Pages 131-142]
  • Khoob, Ehsan The use of fault current limiter to reduce the operating time of relays [Volume 16, Issue 53, 2018, Pages 171-181]
  • Khoramdel, Hadi A Modified Single-Phase Single-Stage Boost Inverter [Volume 22, Issue 76, 2024, Pages 13-26]
  • Khorasani, ESTIMATION OF PEAK GROUND ACCELERATION, VELOCITY AND DISPLACEMENT USING ARTIFICIAL NEURAL NETWORK [Volume 7, Issue 19, 2009, Pages 11-21]
  • Khorasani, Somayeh Modeling of ultrasonic testing Time of Flight Diffraction (ToFD) technique by Finite Element Method [Volume 13, Issue 41, 2015, Pages 13-26]
  • Khorram, Esmaile A Hybrid Modified Ant Colony for Solving the Capacitated Open Vehicle Routing Problem [Volume 15, Issue 50, 2017, Pages 179-191]
  • Khorshidi, Ehsan Evaluation of pollutants and greenhouse emissions using gasoline-ethanol blends in gasoline engines [Volume 17, Issue 59, 2019, Pages 255-262]
  • Khosravi, Hossein Data Augmentation and Effective Feature Selection in Generative Adversarial Networks for Speech Emotion Recognition [Volume 21, Issue 72, 2023, Pages 1-17]
  • Khosravian Dehkordi, Pouya Service Function Chaining Based on Grammar in Software Defined Networks [Volume 17, Issue 57, 2019, Pages 187-199]
  • Khosroabadi, Mohammad INVESTIGATION OF DESIGN CODES RELIABILITY FOR SEISMIC DESIGN OF STEEL PLATE SHEAR WALLS CONSISTING OF SEVERAL PARAMETERS [Volume 16, Issue 52, 2018, Pages 277-297]
  • Kiani, Kourosh Spoken Persian digits recognition using deep learning [Volume 21, Issue 74, 2023, Pages 163-172]
  • Kiani, Kourosh A Transformer-Based Model for Abnormal Activity Recognition [Volume 22, Issue 76, 2024, Pages 213-221]
  • Kiani, Kourosh Combining Style Transfer in a Frame with Random Rotation Using Convolutional Neural Networks [Volume 22, Issue 78, 2024, Pages 275-281]
  • Kimiaei, ULTIMATE CAPACITY OF FIXED OFFSHORE PLATFORMS BY STATIC AND DYNAMIC PUSHOVER ANALYSES UNDER ENVIRONMENTAL LOADS [Volume 8, Issue 21, 2010, Pages 1-14]
  • Kokabi, Alireza Modeling of short polypeptide chains to identify Essential Amino Acids by calculating Nuclear Magnetic Resonance spectrum [Volume 19, Issue 67, 2021, Pages 223-234]
  • Koohestani, MODELING OF NONDESTRUCTIVE ULTRASONIC TEST OF BONDING BETWEEN ALUMINUM AND COMPOSITE USING FEM [Volume 9, Issue 26, 2011, Pages 1-12]
  • Koohsari, Hamid Evaluation of Influential Factors on the Dynamic Compaction Operation of Granular Soils Based on Fuzzy Method [Volume 13, Issue 43, 2016, Pages 143-158]
  • Kord, Fatemeh Experimental Study and neural network modeling for prediction of refractive index of pure and binary alcohol mixtures [Volume 17, Issue 56, 2019, Pages 375-387]
  • Kourehli, Seyed Sina Crack Detection of Timoshenko Beam Using Frequency and Frequency Response Function [Volume 16, Issue 54, 2018, Pages 205-216]
  • Koushki, Mehdi Numerical investigation of ground surface settlement due to circular tunnelling influenced by variations of geometric characteristics of tunnel and mechanical properties of saturated soil and its prediction in the artificial neural network [Volume 19, Issue 64, 2021, Pages 27-39]
  • Kowsari, ANALYTICAL SOLUTION OF NON-FOURIER HEAT CONDUCTION PROBLEM ON A SLAB UNDER CONVECTION BOUNDARY CONDITIONS [Volume 11, Issue 32, 2013, Pages 69-81]

L

  • Labibzadeh, Razyie Rereading the spatial structure model of middle class housing by using the paradigm of Complex systems theory (CST) [Volume 21, Issue 74, 2023, Pages 255-273]
  • Lalee, Raheleh Using Discrete Markov Chain Model for Predicting the Behavior of Banks Loan Portfolios [Volume 14, Issue 47, 2016, Pages 61-76]
  • Lashgari, Mahmood Ultra-Fast Busbar Protection by Applying TT-transform on Superimposed Current Signals [Volume 16, Issue 53, 2018, Pages 135-147]
  • Lashkarbolooki, Mostafa Prediction of surface tension of ionic liquid based on imidazolium using artificial neural network [Volume 17, Issue 58, 2019, Pages 1-13]
  • Lashkaripour, Gholam Reza A Game Theory-Based Approach to Hierarchically Rank Responses to Geological and Geotechnical Risks [Volume 22, Issue 78, 2024, Pages 157-170]
  • Latifi, Anosheh Thermodynamic analysis of a 30 kW gas-solar hybrid microturbine system based on radiation conditions in Qom province [Volume 19, Issue 67, 2021, Pages 59-71]
  • Lotfi, ehsan A NOVEL MODEL FOR DECISION–MAKING ON OPEC PRODUCTION LEVEL BASED ON OIL PRICE PREDICTION AND GAME THEORY [Volume 11, Issue 35, 2013, Pages 63-76]
  • Lotfi, Hossein Intelligent consumption management of residential buildings with the help of energy hub in the presence of multiple energy carriers [Volume 21, Issue 74, 2023, Pages 21-35]
  • Lotfi, Hossein Multi-objective feeder reconfiguration problem in the presence of distributed generation sources and capacitors units considering network voltage Security [Volume 21, Issue 73, 2023, Pages 103-118]
  • Lotfollahi, lotfollahi MATHEMATICAL MODELING FOR RAPID EXPANSION OF SUPERCRITICAL SOLUTION TO PRODUCE NANO AND MICRO NABUTEMON PARTICLES [Volume 11, Issue 35, 2013, Pages 25-38]
  • Lotfollahi Yaghin, ANALYTICAL STUDY OF CONCRETE-FILLED DOUBLE SKIN STEEL TUBULAR COLUMNS UNDER INTERACTION OF BENDING MOMENT AND AXIAL LOAD [Volume 10, Issue 31, 2012, Pages 15-23]
  • Lotfollahi-Yaghin, Mohammad Ali Investigating the Shear Strength of New and Old Concrete Joints Under the Effect of Freezing and Thawing Cycles [Volume 22, Issue 77, 2024, Pages 95-106]

M

  • M, E Numerical investigation of counter flow polymer exchange membrane fuel cell with two channel [Volume 16, Issue 53, 2018, Pages 39-51]
  • Maadani, Mohsen Improving the Structural Health Monitoring System in Detection of Tiny Crack Locations using Wavelet Transform and Digital Filter [Volume 17, Issue 58, 2019, Pages 305-316]
  • Mabudi, Amir A molecular dynamics study on the wettability property of modified hydrophilic quartz (001) surface with hydrophobic nanoparticles [Volume 21, Issue 73, 2023, Pages 229-240]
  • Maghrebi, Ramin Reaction coupled with transport phenomena in oxidative coupling of methane:CFD modeling for single pellet [Volume 12, Issue 39, 2014, Pages 123-141]
  • Maghsoodi, Saeed Comprehensive Modeling of Induction Motor Imbalance Condition to ‎Precise Assessment of Steady State Performance Based on Complex ‎Current Unbalance Factor [Volume 19, Issue 66, 2021, Pages 65-78]
  • Maghsoudi, iman Improving the efficiency of a serpentine inlet duct by using of Blowing Jet Vortex Generators flow control technique [Volume 16, Issue 53, 2018, Pages 9-23]
  • Maghsoudi, rohollah A COMPARATIVE ANALYSIS OF ARTIFICIAL BEE COLONY AND PARTICLE SWARM OPTIMIZATION SWARM INTELLIGENCE ALGORITHMS IN DESIGN A FRACTIONAL FUZZY PID CONTROLLER AND IMPLEMENTATION ON DC MOTOR [Volume 11, Issue 35, 2013, Pages 11-23]
  • Maghsoudpour, Adel Crashworthiness investigation of multi-component conical absorber with spherical cap under free inversion process: experimental study and numerical simulation [Volume 21, Issue 73, 2023, Pages 241-253]
  • Mahboub, Vahid A Modified Grey Wolf Algorithm with Applications to Engineering [Volume 22, Issue 76, 2024, Pages 189-195]
  • Mahdavi, Iraj Solving the multi-trip vehicle routing problem with time windows in urban waste management using grey wolf optimization algorithm [Volume 17, Issue 57, 2019, Pages 93-110]
  • Mahdianpour, Milad Ultimate strength of stiffened plate with pitting corrosion and inclined crack under uniaxial compression [Volume 18, Issue 62, 2020, Pages 143-151]
  • Mahjoob, Mohammad Modeling and Fault Detection of Quadrotor with Rotor Thrust Deviation Fault [Volume 19, Issue 67, 2021, Pages 245-262]
  • Mahmoodabadi, Mohammad Javad Numerical Simulation of Pellet Furnace Firing Area Case Study: Golgohar Mining Industrial Complex in Sirjan [Volume 22, Issue 78, 2024, Pages 249-257]
  • Mahmoodi, Ehsan Impact of information system flow on make-to-order manufacturer supply chain network: systems dynamics approach [Volume 8, Issue 22, 2010, Pages 21-35]
  • Mahmoodi, Masoud Prediction of Mechanical Properties of Equal Channel Angular Rolled Al6061 Alloy Sheet Using Artificial Neural Networks and Nonlinear Regression [Volume 15, Issue 51, 2017, Pages 197-207]
  • Mahmoodian, Vahid A robust multi objective model for forward – reverse supply chain designing based on social responsibility [Volume 14, Issue 47, 2016, Pages 171-185]
  • Mahmoodi Darian, Hossein An Efficient Method for Defining Multivariate Functions Using Expression Templates for Arrays in C++ and CUDA [Volume 16, Issue 55, 2018, Pages 113-131]
  • Mahmoodzadeh, Amir Generating Random Samples Using Response Surface Methodology without need to Distribution of Parameters [Volume 16, Issue 54, 2018, Pages 139-152]
  • Mahtabi, Ghorban Application of numerical simulation in determining the position and dimensions of weep hole of concrete channel under different groundwater levels [Volume 16, Issue 55, 2018, Pages 267-278]
  • Mahtabi, Ghorban Turbulence Intensity and Boundary Shear Stress in Meandering Compound Channel under the Influence of Sinusoidal Changes [Volume 18, Issue 60, 2020, Pages 53-69]
  • Majidi, Ahsan Overhaul Scheduling, considering the limited access to spare parts, reliability, and equipment availability by using fuzzy data [Volume 21, Issue 74, 2023, Pages 173-190]
  • Majzoobi, EXPERIMENTAL AND NUMERICAL STUDY OF TEMPERATURE DISTRIBUTION AND DETERMINATION OF RESIDUAL STRESSES DUE TO WELDING OF PLATES [Volume 9, Issue 27, 2011, Pages 49-59]
  • Makui, Ahmad A robust multi objective model for forward – reverse supply chain designing based on social responsibility [Volume 14, Issue 47, 2016, Pages 171-185]
  • Makvandi, Alireza Design of a Hierarchical Fuzzy Control System to Guide the Robot and Prevent Collisions with Obstacles [Volume 22, Issue 78, 2024, Pages 317-327]
  • Makvandi, Hesam Design of a Hierarchical Fuzzy Control System to Guide the Robot and Prevent Collisions with Obstacles [Volume 22, Issue 78, 2024, Pages 317-327]
  • Maleki, Ali Modeling and evaluation of Massey Ferguson tractor seat using finite element method [Volume 16, Issue 53, 2018, Pages 269-278]
  • Maleki, Ali A modified Canonical Correlation Analysis Method for SSVEP Frequency Recognition [Volume 16, Issue 55, 2018, Pages 199-207]
  • Maleki, Atena Modeling the Risks of Blockchain Development in Improving the Resilience of the Medical Equipment Supply Chain [Volume 22, Issue 78, 2024, Pages 141-156]
  • Maleki Moghaddam, Mostafa An Investigation into the Relationships Determining Ball Trajectory in Mills by Using the Physical Modelling [Volume 17, Issue 58, 2019, Pages 203-214]
  • Malekinejad, Mohsen Determination Optimum Location of Outrigger and Belt Truss System in Tall Buildings with Non-Uniform Cross Section [Volume 16, Issue 53, 2018, Pages 289-297]
  • Malekzadeh, Mina A new dynamic EDCA mechanism to improve VoIP services in 802.11ac networks [Volume 18, Issue 61, 2020, Pages 21-34]
  • Mallah, Mohammad Hasan Investigating the Effects of Nanoparticle and Surfactant on Mass Transfer coefficient in Pulsed Packed Column [Volume 19, Issue 66, 2021, Pages 141-156]
  • Mansouri, Somayeh Energy recovery from the rotary kiln of white cement Neyriz [Volume 21, Issue 73, 2023, Pages 201-228]
  • Manthouri, Mohammad Fault Tolerant Control of Wind Turbine Systems using Fuzzy Sliding Mode Control [Volume 20, Issue 71, 2022, Pages 135-150]
  • Marvi, Hossein New method for generation of artificial earthquake record by new model in compression and Artificial Neural Networks [Volume 14, Issue 46, 2016, Pages 75-85]
  • Marvi, Hossein A New and Efficient Feature Extraction Method for Robust Speech Recognition Based on Fractional Fourier Transform and Differential Evolution Optimizer [Volume 18, Issue 61, 2020, Pages 85-96]
  • Marvi, Hossein Data Augmentation and Effective Feature Selection in Generative Adversarial Networks for Speech Emotion Recognition [Volume 21, Issue 72, 2023, Pages 1-17]
  • Masehian, E. PATH PLANNING OF TRACTOR-TRAILER ROBOT BY FAST MARCHING METHODE (FMM) [Volume 11, Issue 34, 2013, Pages 31-47]
  • Mashayekhi, THE MATHEMATICAL FORM OF MATERIAL CONSTITUTIVE LAWS APPLICABLE FOR MODELING OF METAL PLASTIC BEHAVIOR IN SIMULATION OF MACHINING [Volume 10, Issue 31, 2012, Pages 37-48]
  • Mashayekhi, Mohammad Optimization of composite distal radius fixture using continuum damage mechanics [Volume 21, Issue 75, 2023, Pages 255-267]
  • Masodi, Milad Energy Absorption of Auxetic Metallic Yield Damper Made of Shape Memory Alloys [Volume 22, Issue 77, 2024, Pages 79-93]
  • Masoudi, Babak DFDA-AD: An Approach with Dual Feature Extraction Architecture and Dual Attention Mechanism for Image Anomaly Detection [Volume 22, Issue 79, 2024, Pages 45-57]
  • Masoumi, Mehrdad Quantitative Risk assessment for 35 KM oil transfer pipeline leakage from Mansouri oil field to Ahwaz booster pump with QRA and Olga dynamic modeling [Volume 21, Issue 75, 2023, Pages 181-191]
  • Mazaheri, Mehdi Simultaneous identification of location and intensity of several active pollutant sources in river using mathematical modeling [Volume 18, Issue 60, 2020, Pages 257-272]
  • Mazidi Sharfabadi, Mohsen Experimental and Numerical Investigation of Received ‎Solar Radiation on a Domed and Flat Roof [Volume 13, Issue 43, 2016, Pages 15-24]
  • Mazinani, Mahdi An Intelligent Hybrid Segmentation Model Based on Fuzzy Logic, Discrete Wavelet Transform In Digital Imaging for Detection of Gastric Cancer [Volume 18, Issue 63, 2020, Pages 131-150]
  • Mazloom, Golshan Investigation of the oxygen function in the selective oxidation of propane to acrylic acid over Mo1V0.3Te0.23Nb0.12Ox catalyst using kinetic modeling [Volume 17, Issue 57, 2019, Pages 55-68]
  • Mehdipoor, Mahnaz Synthesis and characterization of hydrophobised magnetite nanoparticles for production of liquid marbles and modeling of liquid marble deformation under the gravity effect [Volume 21, Issue 75, 2023, Pages 53-66]
  • Mehrabi, Ahmad Numerical Analysis of Flexible Pavements Using Micromechanical Approach [Volume 13, Issue 40, 2015, Pages 59-67]
  • Mehrabi, Mohsen Computer Simulation of Doppler Ultrasound Blood Flow Signals Related to Stenosed Vessels Using Simulation of Pulsatile Blood Flow Behavior in Vessels with Various Stenosis Degrees [Volume 20, Issue 69, 2022, Pages 61-70]
  • Mehrad, Mahsa A new technique for reducing self heating effect in MOSFETs with extended source and drain [Volume 16, Issue 53, 2018, Pages 149-155]
  • Mehryar, Reza Thermo-hydro-dynamic investigation of journal bearing by a two dimensional model [Volume 16, Issue 53, 2018, Pages 101-112]
  • Mehryar Irdimosa, Hamed Creating supply chain management strategy map with using causal loop diagram and balanced scorecard [Volume 13, Issue 42, 2015, Pages 151-165]
  • Memarian, Farzaneh Young's Modulus prediction of polyurethane and acrylonitrile butadiene styrene polymer blend based on phase morphology [Volume 16, Issue 52, 2018, Pages 1-13]
  • Memarpour, ULTIMATE CAPACITY OF FIXED OFFSHORE PLATFORMS BY STATIC AND DYNAMIC PUSHOVER ANALYSES UNDER ENVIRONMENTAL LOADS [Volume 8, Issue 21, 2010, Pages 1-14]
  • Meshkani, Fereshteh Investigation of Thermodynamic Model for Ceria Promoted Nickel Catalyst Supported on Nanocrystalline MgO in Dry Reforming of Methane [Volume 16, Issue 53, 2018, Pages 389-396]
  • Minaei, Asgar Effect of the distance between the pipes on the thermal performance of multi-pipe earth-to-air heat exchangers with parallel pipes [Volume 21, Issue 75, 2023, Pages 147-159]
  • Minaei, Asgar Numerical Evaluation of Thermal Comfort and Indoor Air Quality in an Office Space Equipped with a Radiant Ceiling Cooling System and Hybrid Radiative-Convective Cooling System [Volume 22, Issue 77, 2024, Pages 37-56]
  • Minaei, Asgar Cogeneration system based on combined Brayton and inverse Brayton cycle based on biogas fuel [(Articles in Press)]
  • Minaei, Asgar Thermodynamic and Exergoeconomic Study of an Absorption-Compression Refrigeration Cycle Driven by a Geothermal Energy Resource [Volume 22, Issue 78, 2024, Pages 59-77]
  • Minaei_Bidgoli, Behrouz Online and Robust Anomaly Detection using Recurrent Neural Network [Volume 21, Issue 74, 2023, Pages 243-254]
  • Mir, Massoud Evaluation of friction using cylinder compression test: two novel approaches based on the barreling deformation and forging force [Volume 18, Issue 61, 2020, Pages 97-109]
  • Mir, Massoud Investigating the effect of laser shock process on fracture and fatigue properties of 2024-T351 aluminum alloy using numerical modeling [Volume 21, Issue 75, 2023, Pages 67-82]
  • Mir, Massoud Determination of Young's modulus of Boron Nitride nano tubes using energy method [Volume 21, Issue 73, 2023, Pages 159-169]
  • Mirabdolah Lavasani, Arash The effect of surface geometry and the fluid inside the channel wall on thermal-hydraulic performance in sinusoidal corrugated channel in the turbulent fluid flow. [Volume 17, Issue 57, 2019, Pages 273-283]
  • Mirabdolah Lavasani, Arash Experimental study on The Angle of attack effect on Hydraulic- Thermal performance of a cam-shaped tube with constant heat flux in cross flow [Volume 18, Issue 60, 2020, Pages 27-37]
  • Mirabdolah Lavasani, Arash Simulation of a High-Speed Train against a Turbulent Air Flow using Computational Fluid Mechanics Method and Multi-Layer Feed-Forward Neural Network Algorithm [Volume 19, Issue 67, 2021, Pages 119-134]
  • Mirabdolah Lavasani, Arash Study the Effects of Magnetic Field and Porous Medium on Heat Transfer and Flow of a Nanofluid in a Wavy Channel [Volume 20, Issue 71, 2022, Pages 13-25]
  • Mirabdolah Lavasani, Arash Effect of Magnetic Field and Hybrid Nanofluid on Heat Transfer Through a Microchannel [Volume 22, Issue 78, 2024, Pages 185-199]
  • Mirakhorloo, Farzaneh Investigation and Prediction of Physical and Mechanical Properties of Gypsum/Rice Straw Composite Using ANFIS Model [Volume 17, Issue 58, 2019, Pages 267-278]
  • Mirassi, Sohrab Damage Evaluation of Concrete Bridge with Steel Piers Subjected to Explosive Loads [Volume 22, Issue 78, 2024, Pages 297-316]
  • Mirbabaee, Ghasem Modelling of Distributed Energy Resources Management in Microgird using Distributed Algorithm [Volume 17, Issue 57, 2019, Pages 241-252]
  • Mirdamadi, Seyed Mohammad Sadegh A meta-heuristic method for maximum capacity path interdiction problem with multiple attackers [Volume 20, Issue 70, 2022, Pages 133-146]
  • Miri, M. A NEW METHOD FOR ASSESMENT OF THE STRACTURAL RELIABILITY [Volume 12, Issue 36, 2014, Pages 29-42]
  • Mirjalily, Ghasem Service Function Chaining Based on Grammar in Software Defined Networks [Volume 17, Issue 57, 2019, Pages 187-199]
  • Mirmohammadsadeghi, Sayed Ehsan Mechanistic modeling of cutting forces in end milling with the direct cutting edge [Volume 18, Issue 61, 2020, Pages 151-166]
  • Miroliaei, Ali Reza Investigation of effective parameters on hydrodynamics of rotating packed bed using computational fluid dynamics [Volume 17, Issue 59, 2019, Pages 35-45]
  • Mirsalim, EXPERIMENTAL INVESTIGATION OF THE TRANSIENT JET EMANATING FROM THE PROTOTYPE DIRECT GASEOUS INJECTOR [Volume 9, Issue 25, 2011, Pages 21-31]
  • Mirtalaei, Sayyed Mohammad Mehdi Design, modeling and implementation of a high step up z-source converter for connection of renewable energy source to the electrical grid [Volume 16, Issue 53, 2018, Pages 221-229]
  • Mirtavoosi, S. Ayoub A dynamic Approach for Modeling the Amount of Soft Tissue Viscoelasticity with respect to Its Momentary Status [Volume 20, Issue 69, 2022, Pages 81-91]
  • Mirzaei, Danesh Numerical simulation of the flow field and heat transfer inside the channel with different dimensions of spindle obstacles in the presence of power-law non-Newtonian fluids [Volume 21, Issue 73, 2023, Pages 147-157]
  • Mirzaei, Faezeh Simulation and Implementation of Obstacle Avoidance and Synchronization Tasks using Probabilistic and Timed Supervisory Control Theory in Swarm Robotics [Volume 16, Issue 55, 2018, Pages 175-190]
  • Mirzaei, M. NUMERCIAL FORMULATION AND SIMULATION OF A NON-NEWTONIAN MAGNETIC FLUID FLOW IN THE BOUNDARY LAYER OF A STRETCHING SHEET [Volume 11, Issue 34, 2013, Pages 77-85]
  • Mirzaei, Z.S. SINGLE OBJECTIVE OPTIMIZATION OF CLOSED BALL MILLING CIRCUIT OF ESFORDI PHOSPHATE PLANT [Volume 11, Issue 33, 2013, Pages 15-25]
  • Mirzakhani, Aboozar Energy Absorption of Auxetic Metallic Yield Damper Made of Shape Memory Alloys [Volume 22, Issue 77, 2024, Pages 79-93]
  • Mirzayi, Behruz Investigating the Effect of Deactivation Rate Constant of Polymer-Based Silver Catalyst on the Reduction of Pollutant 4-Nitrophenol to 4-Aminophenol [Volume 22, Issue 77, 2024, Pages 117-127]
  • Moafi, Mohammad Saleh Presentation of a Combined Code Generator and its Development in the Form of New Capabilities with Service-Oriented Architecture Approach [Volume 16, Issue 54, 2018, Pages 105-123]
  • Moallem, Mahmoud Anomaly Detection using LSTM AutoEncoder [Volume 17, Issue 56, 2019, Pages 191-211]
  • Moallemi Khiavi, Negin Numerical Evaluation of Thermal Comfort and Indoor Air Quality in an Office Space Equipped with a Radiant Ceiling Cooling System and Hybrid Radiative-Convective Cooling System [Volume 22, Issue 77, 2024, Pages 37-56]
  • Moallemi-Oreh, Abbas Finite Element Formulation for Free Vibration and Stability of Timoshenko beam [Volume 12, Issue 38, 2014, Pages 143-152]
  • Moarefianpour, Ali Lyapunov stability analysis in the training of type 2 neuro-fuzzy inference system with a hybrid algorithm based on gradient descent and Kalman filter [Volume 20, Issue 68, 2022, Pages 85-100]
  • Moarefzadeh, Mohammad Reza A stochastic corrosion model for structural steels subject to sea waters [Volume 16, Issue 52, 2018, Pages 67-81]
  • Moayedi, Hossein Prediction of optimal mixing design for stabilized soft clay soil using Artificial Neural Networks [Volume 17, Issue 57, 2019, Pages 147-158]
  • Moayyedi, Mohammadreza ANN and Mathematical Mass Transfer Modeling of Glycol Amin Liquid Membranes for Separation of Carbon Dioxide from the Air [Volume 14, Issue 47, 2016, Pages 51-60]
  • Moazeni, Bentolhoda A Fair Group Recommendation System Based on Members and Leader Influences [Volume 22, Issue 77, 2024, Pages 221-243]
  • Mobaraki, Ali Optimization of MLP Neural Network Using the FinGrain Parallel Genetic Algorithm for Breast Cancer Diagnosis [Volume 17, Issue 57, 2019, Pages 173-186]
  • Mobedi, Peyman Experimental study on The Angle of attack effect on Hydraulic- Thermal performance of a cam-shaped tube with constant heat flux in cross flow [Volume 18, Issue 60, 2020, Pages 27-37]
  • Modanloo, Vahid Optimization of the roll forming process of U channels using a hybrid response surface and desirability function approach [Volume 15, Issue 51, 2017, Pages 237-250]
  • Moeinkhah, Hossein Kinematics and workspace analysis of a 3DOF parallel reconfigurable robot [Volume 21, Issue 73, 2023, Pages 171-185]
  • Moetakef-Imani, Behnam Control of Horizontal Axis Wind Turbine with Synchronous Generator to Capture Maximum Energy of Wind [Volume 16, Issue 54, 2018, Pages 403-413]
  • Mofarahi, Masoud Dynamic Modeling of Charge and Discharge of Adsorbed Natural Gas storage Tank [Volume 16, Issue 54, 2018, Pages 309-326]
  • Mofid, OPTIMIZING THE RESOURCE ALLOCATION OF PROJECT ACTIVITIES USING CRD METHOD [Volume 7, Issue 19, 2009, Pages 37-46]
  • Moghimi, Ali The Mixture of EEG Signal and Ocular Interference Modeling in the Head Volume Conductor [Volume 13, Issue 40, 2015, Pages 115-128]
  • Mohagheghian, shahriar Numerical Simulation of Machining Processes by Using Hooputra's Shear Damage Criterion [Volume 15, Issue 49, 2017, Pages 101-109]
  • Mohamadebrahim, Abolfazl Analysis and simulation of atmospheric burners of heaters in city gas pressure reduction station [Volume 20, Issue 71, 2022, Pages 165-174]
  • Mohammadi, BEHAVIOR FACTOR OF STEEL DUAL FRAMES WITH LARGE- SCALED CONCENTRICALLY BRACING SYSTEMS [Volume 10, Issue 31, 2012, Pages 1-13]
  • Mohammadi, NANO-ANTENNAS MODELING WITH BOR-FDTD AND INVESTIGATING EFFECT OF DISTANCE ON FLUORESCENCE [Volume 11, Issue 32, 2013, Pages 57-67]
  • Mohammadi, Asghar Modeling and Simulation of Catalytic Direct Partial Oxidation of Methane to Methanol in a Fluidized-Bed Reactor [Volume 16, Issue 52, 2018, Pages 397-407]
  • Mohammadi, Hadiqe Modeling the interaction of water resources and value added in the Birjand Plain [Volume 16, Issue 55, 2018, Pages 279-298]
  • Mohammadi, Karim Design and Simulation of Fault Tolerant Algorithms in Network-on-Chip [Volume 7, Issue 16, 2009]
  • Mohammadi, M. SIMULATION OF PEDESTRIAN MOVEMENTS USING SOCIAL FORCE MODEL [Volume 11, Issue 34, 2013, Pages 49-62]
  • Mohammadi, Mirali Turbulence Intensity and Boundary Shear Stress in Meandering Compound Channel under the Influence of Sinusoidal Changes [Volume 18, Issue 60, 2020, Pages 53-69]
  • Mohammadi, Mirali Numerical investigation of flow velocity and shear stress in a rough rectangular compound channel with single floodplain [Volume 19, Issue 64, 2021, Pages 41-51]
  • Mohammadi, Mirali On the Prediction of Discharge Coefficient for Sluice Gates under Submerged Flow Conditions using Soft Computing Techniques [Volume 20, Issue 71, 2022, Pages 1-12]
  • Mohammadi, Saman CFD simulation of the effect of magnetic field on convective heat transfer and ferrofluid flow inside a pipe [Volume 20, Issue 69, 2022, Pages 155-166]
  • Mohammadi, Samira Modeling the one-dimensional inverse heat transfer problem using a Haar wavelet collocation approach [Volume 17, Issue 56, 2019, Pages 293-302]
  • Mohammadi, Seydeh Samira A New Meta-Heuristic Algorithm Based on Tabu Search for the Job Scheduling Problem in a Fog-Cloud system [Volume 18, Issue 62, 2020, Pages 13-29]
  • Mohammadi, Vahid Determining Hardening Soil Model Parameters of Urmia Lake Sand by Numerical Modeling of Undrained Triaxial Test and Comparison with Laboratory Results [Volume 22, Issue 78, 2024, Pages 171-183]
  • Mohammadi, Yaghoub Progressive collapse analysis methods due to blast loading in steel moment frames [Volume 15, Issue 51, 2017, Pages 51-65]
  • Mohammadian, Leila A New Method of Modeling for Cuk Converter Based on Signal Flow Graph Approach and its Control by using a Mixed Sensitivity Type Robust Technique [Volume 15, Issue 51, 2017, Pages 275-288]
  • Mohammadian, Mohammad Modelling and digital-based direct power control of shunt active power filter for rectifier loads [Volume 21, Issue 72, 2023, Pages 99-109]
  • Mohammadimehr, Mehdi The surface stress effects on linear vibration of nonlocal triple-walled boron nitride nano tube conveying viscose fluid flow using DQM [Volume 13, Issue 43, 2016, Pages 47-66]
  • Mohammad Nezhad, Aboozar Robust Controller Design of Double Fed Induction Generator in the Presence of Uncertainties From the System Model and Measurement [Volume 21, Issue 75, 2023, Pages 101-114]
  • Mohammadpour, Amirhossein Provide a Solution Based on Teacher and Student Learning Algorithm to Reduce Regression Test Cases [Volume 22, Issue 78, 2024, Pages 1-15]
  • Mohammadzadeh, A. NUMERCIAL FORMULATION AND SIMULATION OF A NON-NEWTONIAN MAGNETIC FLUID FLOW IN THE BOUNDARY LAYER OF A STRETCHING SHEET [Volume 11, Issue 34, 2013, Pages 77-85]
  • Mohammadzadeh, Ali UniPolar impulse noise removing from digital images based on estimation of noises spatial distribution [Volume 12, Issue 39, 2014, Pages 13-29]
  • Mohammadzadeh, Ardashir Kinematics and workspace analysis of a 3DOF parallel reconfigurable robot [Volume 21, Issue 73, 2023, Pages 171-185]
  • Mohasseli, Ashkan Numerical Study of Wall-to-Bed Heat Transfer in a Gas–Solid Bubbling Fluidized Bed by CFD [Volume 14, Issue 46, 2016, Pages 123-136]
  • Mohebbi, Mohtasham Optimal Design of Active Multiple Tuned Mass Dampers (AMTMDs) For Nonlinear Hysteretic Structures [Volume 15, Issue 48, 2017, Pages 151-163]
  • Mohebbi, Rasul Natural Convection Fluid Flow and Heat Transfer a Square Cavity with a Heated Triangular Obstacle Using Finite Element Method [Volume 16, Issue 55, 2018, Pages 361-373]
  • Mohebi, Saeed Numerical Investigation of the Effect of the Number of Blades and the Twist Ratio of the Twisted tape on the Performance of the Double-Pipe Heat Exchanger [Volume 22, Issue 79, 2024, Pages 1-15]
  • Mohebzadeh, Ahmad Design and Modeling of Biosensor Based on Photonic Crystal Nano Resonator [Volume 15, Issue 51, 2017, Pages 351-358]
  • Mohseni, Mahdi Effect of Turbulence Model on Numerical Simulation of Turbulent Flow of Nanofluids in a Horizontal Pipe [Volume 17, Issue 58, 2019, Pages 279-293]
  • Mokhtari, Hadi modeling and Solution of a Multi-Objective Portfolio Selection by using a Simulated Annealing [Volume 14, Issue 45, 2016, Pages 99-109]
  • Mokhtari, Hadi Modeling and Solution of Job Shop Scheduling with No-Wait Orders to Minimize Makespan: A Decomposition Approach based on Order Sequencing and Timetabling [Volume 15, Issue 50, 2017, Pages 261-270]
  • Mokhtari, Hadi Model of a Work Breakdown Structure (WBS) Framework and AOA Diagram for Efficient Project Management of Lead – Zinc Skarn Exploration with Exploratory Data [Volume 16, Issue 53, 2018, Pages 89-100]
  • Mokhtarian, Ali Determination and comparison of mechanical properties of articular cartilage using pro-hyper-viscoelastic models based on an unconfined stress relaxation [Volume 19, Issue 66, 2021, Pages 95-106]
  • Mokhtarian Asl, Mojtaba Application of response surface method to the prediction of TBM penetration rate [Volume 16, Issue 55, 2018, Pages 299-310]
  • Molaie, Zahra Scheduling optimization of highway construction projects based on Lean thinking [Volume 13, Issue 40, 2015, Pages 33-42]
  • Molladavoodi, Hamed Numerical Analysis of the Segmental Supporting System Under Earthquake Loading [Volume 16, Issue 54, 2018, Pages 177-187]
  • Mollahoseini, Zahra Numerical Investigation of the Strain Stiffening Behavior of Mesenchymal Stem Cells on Elastic Substrates [Volume 16, Issue 55, 2018, Pages 351-359]
  • Mollahoseini Ardakani, Mohammad Reza VNR_CCP: A New Approach to Congestion Control Using Virtualization Technique and Switch Migration in SDN [Volume 22, Issue 76, 2024, Pages 85-98]
  • Mollakhalili, Mohammad reza VNR_CCP: A New Approach to Congestion Control Using Virtualization Technique and Switch Migration in SDN [Volume 22, Issue 76, 2024, Pages 85-98]
  • Mollapour, Yousef Simulation of pitting corrosion behavior of CUSTOM 450 stainless steel by COMSOL software and DIC method [Volume 19, Issue 65, 2021, Pages 29-39]
  • Mollayi, Masoud Multi-Objective Optimization of Reinforced Concrete Frames using Genetic Algorithm and Weighted Sum Method [Volume 16, Issue 52, 2018, Pages 193-201]
  • Mollazade, Kaveh A New Deep Vision-Based Identifier As An Intelligent Herbicide Spraying Agent For Potato Farm Application [Volume 22, Issue 79, 2024, Pages 79-97]
  • Mollazadeh, Mitra Application of numerical simulation in determining the position and dimensions of weep hole of concrete channel under different groundwater levels [Volume 16, Issue 55, 2018, Pages 267-278]
  • Momayezi, Farid Single allocation hub location problem considering zero-one uncertain demands [Volume 19, Issue 66, 2021, Pages 157-173]
  • Momayezi, Farid A Multi-Period Mathematical Model to Optimize Smart Home Energy Management with Scheduling of Appliances and Solar Cell Cost Calculation [Volume 22, Issue 77, 2024, Pages 129-156]
  • Momeni, Mohammad Damage Evaluation of Concrete Bridge with Steel Piers Subjected to Explosive Loads [Volume 22, Issue 78, 2024, Pages 297-316]
  • Monfaredi, Khalil Design and Simulation of Second Order Sigma-Delta Modulator with Very High Precision and Low Power Consumption for Medical Applications [Volume 16, Issue 55, 2018, Pages 191-197]
  • Monjezi, Masoud EFFICIENCY IMPROVEMENT OF THE SONGUN COPPER MINE FLEET USING SIMULATION TECHNIQUE [Volume 12, Issue 39, 2014, Pages 99-110]
  • Monjezi, Masoud Optimization of open pit mines fleet using Simulation-based optimization method (Case study: SONGUN copper mine) [Volume 17, Issue 56, 2019, Pages 169-190]
  • Montazeri, Mina Designing an Incentive Mechanism to Reward Users for Advertising Content Usage Considering Network Effects [Volume 22, Issue 78, 2024, Pages 259-273]
  • Moosavian, A.A. MOST STABLE MOTION DESIGN OF THE MOBILE ROBOT IN THE SPECIFIED PATH [Volume 11, Issue 33, 2013, Pages 1-14]
  • Moradbeiky, Amin A flexible effort estimator model based on ASO algorithm [Volume 21, Issue 73, 2023, Pages 1-16]
  • Moradhasel, Behrouz Laboratory modeling of heat transfer system of radiology tube using multi-walled carbon nanofluid and evaluation of heat transfer coefficient [Volume 12, Issue 38, 2014, Pages 45-58]
  • Moradi, Ahmad Investigating the Factors Affecting the Transient Overvoltages Caused by Lightning in the Low-Voltage Network and the Role of the SPD Installed in the Substation in Protecting the Network [Volume 22, Issue 76, 2024, Pages 223-239]
  • Moradi, Mojtaba Optimal Trajectory Planning and Repetitive Balancing for Mobile Robots in High-Speed Motions [Volume 14, Issue 47, 2016, Pages 141-153]
  • Moradi, Mojtaba Optimal Dynamic Manipulation Workspace of a Single Link Robot Manipulator [Volume 16, Issue 54, 2018, Pages 429-441]
  • Moradi, S. FREE VIBRATION ANALYSIS OF CRACKED POST-BUCKLED BEAM BY DIFFERENTIAL QUADRATURE METHOD [Volume 11, Issue 34, 2013, Pages 1-16]
  • Moradi, Shapour Crack detection in beams using Hilbert-Huang transform [Volume 16, Issue 52, 2018, Pages 27-40]
  • Moradi bastani, Majid A Study of Investigation and Experimental Comparison Result of the Incompressible Turbulent Flow Pressure Drop through the Multistage Industrial orifices [Volume 15, Issue 48, 2017, Pages 99-109]
  • Moradmand, THE EFFECT OF MODELING METHODS OF MASONRY INFILL ON SEISMIC PERFORMANCE OF RC MOMENT RESISTING FRAMES [Volume 8, Issue 20, 2010, Pages 27-37]
  • Moravej, AN INTELLIGENT METHOD FOR DETECTION AND CLASSIFICATION OF POWER QUALITY EVENTS [Volume 9, Issue 27, 2011, Pages 23-36]
  • Moravej, Zahra A New Fault Detection and Classification Scheme in MTDC Grids with Hybrid Cable and Overhead Transmission Line [Volume 22, Issue 76, 2024, Pages 141-154]
  • Moravej, Zahra Online Vulnerability Assessment in Cascading Failure Analysis Using an Intelligence Monitoring Model [Volume 22, Issue 77, 2024, Pages 273-290]
  • Moravej, Zahra Fault Detection and Classification in Two -Interconnected AC Microgrid at by Modal and Superimposed Analysis [Volume 22, Issue 79, 2024, Pages 135-152]
  • MORAVEJ, ZAHRA Impact of STATCOM and HSFCL on the performance of distance relays in transmission network [Volume 20, Issue 71, 2022, Pages 101-112]
  • Mortezaei, MODELING AND ESTIMATION OF PLASTIC HINGE LENGTH OF RC COLUMNS USING ARTIFICIAL NEURAL NETWORKS [Volume 10, Issue 29, 2012, Pages 1-17]
  • Mortezaei, Alireza Mesh dependency phenomenon in the nonlinear behavior of RC members under the blast loading [Volume 14, Issue 47, 2016, Pages 1-20]
  • Moshfeghi, Mohammad Numerical study of the effect of adding corona discharge based on plasma actuator on flow control performance in a horizontal axis wind turbine with rough surfaces [Volume 21, Issue 74, 2023, Pages 291-303]
  • Moshiri, behzad A COMPARATIVE ANALYSIS OF ARTIFICIAL BEE COLONY AND PARTICLE SWARM OPTIMIZATION SWARM INTELLIGENCE ALGORITHMS IN DESIGN A FRACTIONAL FUZZY PID CONTROLLER AND IMPLEMENTATION ON DC MOTOR [Volume 11, Issue 35, 2013, Pages 11-23]
  • Mostafavi, Mahsa The effect of the blowing and suction from one or two positions over the suction surface of NACA0012 airfoil on aerodynamic performance in turbulent flow [Volume 15, Issue 51, 2017, Pages 331-340]
  • Mostafavian, Evaluation of Behavior of a Ball Joint System in a Double Layer Grid through Updating of its Natural Frequencies [Volume 8, Issue 23, 2011, Pages 61-78]
  • Mostakhdemin Hosseini, Mohammad Reza Minimization of weight in truss structures under probabilistic constrains [Volume 19, Issue 66, 2021, Pages 107-120]
  • Mostowfi Nia, Ata Designing an optimal automatic train operation system using the model-predictive controller with a case study of a part of Tehran subway line 1 [(Articles in Press)]
  • Motaghed, Sasan Sobol sensitivity generalization for engineering and science applications [Volume 16, Issue 54, 2018, Pages 217-226]
  • Motaghed, Sasan Modeling inelastic behavior of RC adhered shear wall‏s in opensees [Volume 18, Issue 63, 2020, Pages 15-25]
  • Motaghedi Barforoush, Mohammad Sadegh Numerical Investigation of Convection and Radiation Heat Loss Reduction between Two Finite Concentric Cylinders Using Radiation Shields [Volume 15, Issue 50, 2017, Pages 63-74]
  • Motaghedi Barforoush, Mohammad Sadegh Convection and Radiation Heat Loss Reduction between Two Finite Concentric Cylinders Using Radiation Shields at Different Pressure: Experimental Study [Volume 15, Issue 50, 2017, Pages 75-84]
  • Motahar, Sadegh Thermal performance modeling of unglazed transpired solar collectors [Volume 16, Issue 55, 2018, Pages 391-400]
  • Motalebi, Hossein Rereading the spatial structure model of middle class housing by using the paradigm of Complex systems theory (CST) [Volume 21, Issue 74, 2023, Pages 255-273]
  • Motamedi, Mana Optimal Response Modeling of Asphalt Pavement Using Finite Element Method [Volume 14, Issue 47, 2016, Pages 33-40]
  • Mousavi, EFFECTS OF END FORM OF T-JOINT WELDS ON FORMATION OF RESIDUAL STRESSES [Volume 10, Issue 29, 2012, Pages 81-90]
  • Mousavi, Amir Reza Vibration Analysis of Sandwich Panel Structures: A Homogenized Simulation Approach with Modal Analysis [Volume 22, Issue 78, 2024, Pages 17-30]
  • Mousavi, Hamed Effect of the distance between the pipes on the thermal performance of multi-pipe earth-to-air heat exchangers with parallel pipes [Volume 21, Issue 75, 2023, Pages 147-159]
  • Mousavi, Seyed Roohollah A fast hybrid refining optimization with sensitivity-based partitioning approach for truss structures [Volume 17, Issue 57, 2019, Pages 127-146]
  • Mousavi Moghadam, Asefe Modeling the gelation time of sulfonated polyacrylamide/chromium triacetate hydrogel based on screening of the effective parameters [Volume 13, Issue 41, 2015, Pages 159-172]
  • Mousavi Razi, Zahra Directional Microstrip Antenna by using Metamaterial Superstrate in Fabry-Perot Cavity [Volume 13, Issue 42, 2015, Pages 17-25]
  • Mousavizadeh, Seyed Amir Experimental Studies on Energy Absorption of Curved Steel Sheets under Impact Loading and the Effect of Pendentive on the Deformation of Samples [Volume 18, Issue 63, 2020, Pages 27-40]
  • Movafaghpour, Mohamad Ali Developing a Boundary Point Method Algorithm for Solving Linear Programming Problems with Feasible Initial Solution [Volume 17, Issue 56, 2019, Pages 85-99]
  • Movagharnejad, Kamyar Experimental Study and neural network modeling for prediction of refractive index of pure and binary alcohol mixtures [Volume 17, Issue 56, 2019, Pages 375-387]
  • Mozafari, Babak A Generalized Bidirectional Structure for Multi-Level Inverter with Low Number of Power Electronic Devices [Volume 19, Issue 66, 2021, Pages 37-51]
  • Mozafari, Marzieh Stackelberg-Nash Equilibrium in competitive facility location game among a franchisor and two investors [Volume 17, Issue 57, 2019, Pages 111-125]
  • Musa Semnani, Mahdi Combining Style Transfer in a Frame with Random Rotation Using Convolutional Neural Networks [Volume 22, Issue 78, 2024, Pages 275-281]

N

  • N, A Modeling of index-guiding photonic crystal fiber with low-chromatic dispersion and low-nonlinearity effect [Volume 15, Issue 50, 2017, Pages 17-24]
  • Nadalinia Chare, Gholamreza Design and Implementation of Integrated Virtual Sensor Simulator Unit for Hardware in the Loop Laboratory of Autonomous Underwater Vehicle [Volume 22, Issue 78, 2024, Pages 233-248]
  • Naderi, Ali A new tunneling carbon nanotube field effect transistor with linear doping profile at drain region: numerical simulation study [Volume 16, Issue 52, 2018, Pages 109-117]
  • Naderi, Ali Improvement in the Performance of Tunneling Carbon Nanotube Field Effects Transistor in Presence of Underlap [Volume 17, Issue 59, 2019, Pages 215-224]
  • Naderi, Hasan Modeling the gelation time of sulfonated polyacrylamide/chromium triacetate hydrogel based on screening of the effective parameters [Volume 13, Issue 41, 2015, Pages 159-172]
  • Naderi, Hassan Data Tarn: A New Approach for Management and Real-Time Analyses of Big Data [Volume 16, Issue 55, 2018, Pages 133-154]
  • Naderi, Serveh Numerical study of low salinity water flooding for enhancing oil recovery in sandstone reservoirs by coupling fluid flow equations with geochemical reactions of ion exchange and calcite dissolution [Volume 17, Issue 57, 2019, Pages 1-13]
  • Naderi Bakhtiari, Ali Prediction of Mechanical Properties of Equal Channel Angular Rolled Al6061 Alloy Sheet Using Artificial Neural Networks and Nonlinear Regression [Volume 15, Issue 51, 2017, Pages 197-207]
  • Naderpour, OPTIMIZING THE RESOURCE ALLOCATION OF PROJECT ACTIVITIES USING CRD METHOD [Volume 7, Issue 19, 2009, Pages 37-46]
  • Naderpour, Optimized ANN Algorithm for Analyzing the Road Flexible Pavements [Volume 8, Issue 21, 2010, Pages 45-56]
  • Naderpour, Optimized ANN Algorithm for Analyzing the Road Flexible Pavements [Volume 8, Issue 21, 2010, Pages 45-56]
  • Naderpour, BEARING CAPACITY PREDICTION OF SHALLOW STRIP FOUNDATIONS BASED ON COHESIVE LAYERED SUBSOIL USING ARTIFICIAL NEURAL NETWORKS [Volume 9, Issue 24, 2011, Pages 65-82]
  • Naderpour, H. EVALUATION OF BASE-ISOLATOR TYPE DISTRIBUTION IN LOW-RISE BUILDINGS [Volume 14, Issue 44, 2016, Pages 105-115]
  • Naderpour, Hosein INVESTIGATION THE BEHAVIOR AND COMPARISON OF RELIABLE CODES ON CONCRETE-STEEL COMPOSITE COLUMNS [Volume 8, Issue 22, 2010, Pages 37-49]
  • Naderpour, Hosein SHEAR LAG PHENOMENON IN RC TALL BUILDINGS WITH TUBULAR SYSTEM [Volume 9, Issue 26, 2011, Pages 33-48]
  • Naderpour, Hosein Damage Localization and Quantification of Beams Using Wavelet Transform [Volume 12, Issue 39, 2014, Pages 1-11]
  • Naderpour, Hosein Effects of beech and eucalyptus sawdust as a supplementary material to improve the performance of composite panel [Volume 16, Issue 53, 2018, Pages 259-267]
  • Naderpour, Hosein Comparing the optimization of prestressed concrete bridge deck according to the AASHTO LRFD and AASHTO standard procedures using Cuckoo algorithm. [Volume 16, Issue 55, 2018, Pages 209-219]
  • Naeimi, Mehrdad Provide a model for the seismic damage Assessment to buried fuel pipelines in Kermanshah [Volume 13, Issue 41, 2015, Pages 27-45]
  • Naghavi, Mohammad Investigating the Shear Strength of New and Old Concrete Joints Under the Effect of Freezing and Thawing Cycles [Volume 22, Issue 77, 2024, Pages 95-106]
  • Naghipour, INVESTIGATION OF THE BEHAVIOR FACTOR IN DUAL SYSTEMS WITH SIDE PLATE CONNECTION [Volume 8, Issue 21, 2010, Pages 67-82]
  • Nahid Titkanlu, Hossein Modelling uncertainty in performance appraisal process based on evidence theory and fuzzy theory [Volume 15, Issue 51, 2017, Pages 411-432]
  • Naimi Sadigh, A COORDINATION MODEL FOR A COMPETITIVE SUPPLY CHAIN USING COOPERATIVE AND NON-COOPERATIVE GAME THEORY [Volume 10, Issue 29, 2012, Pages 19-31]
  • Naimi Sadigh, A COORDINATION MODEL FOR A COMPETITIVE SUPPLY CHAIN USING COOPERATIVE AND NON-COOPERATIVE GAME THEORY [Volume 10, Issue 29, 2012, Pages 19-31]
  • Naimi Sadigh, Ali Impact of information system flow on make-to-order manufacturer supply chain network: systems dynamics approach [Volume 8, Issue 22, 2010, Pages 21-35]
  • Naimi-Sadigh, Ali Stackelberg-Nash Equilibrium in competitive facility location game among a franchisor and two investors [Volume 17, Issue 57, 2019, Pages 111-125]
  • Najafi, Asadollah Evaluation of Influential Factors on the Dynamic Compaction Operation of Granular Soils Based on Fuzzy Method [Volume 13, Issue 43, 2016, Pages 143-158]
  • Najafi Kani, Ebrahim Investigation and Prediction of Physical and Mechanical Properties of Gypsum/Rice Straw Composite Using ANFIS Model [Volume 17, Issue 58, 2019, Pages 267-278]
  • Najafzadeh, Mohammad Hosein Energy recovery from the rotary kiln of white cement Neyriz [Volume 21, Issue 73, 2023, Pages 201-228]
  • Najibi, Amir Axisymmetric Elastic stress investigation of a 2D- FGM thick hollow cylinder with new material model [Volume 17, Issue 56, 2019, Pages 111-122]
  • Najm, Masoumeh Synthesis Optimization of Arithmetic Circuits on Coarse-Grain Reconfigurable Architecture [Volume 20, Issue 69, 2022, Pages 1-15]
  • Namdar, Mohammadreza Simultaneous optimization of mean and variance of objective functions in a supply chain problem under uncertainty [Volume 16, Issue 53, 2018, Pages 325-338]
  • Namiranian, Effect of pounding in seismic demand of seismic isolated structures [Volume 9, Issue 24, 2011, Pages 53-64]
  • Naserinejad, K Modeling of Spinning Process in High Pressure Aluminum Vessels and Investigation of Effective Parameters [Volume 17, Issue 56, 2019, Pages 303-312]
  • Nasiri, Hamid A novel approach based on CatBoost and explainable artificial intelligence for diagnosis of COVID-19 cases using patients' symptoms [Volume 21, Issue 74, 2023, Pages 231-241]
  • Nasiri, Mohammad Mahdi The Comparison of the Integer Programming Models for Solving the Stage Shop Scheduling Problem [Volume 16, Issue 53, 2018, Pages 379-387]
  • Nasiri Zarandi, Masoud Investigating the Effects of Nanoparticle and Surfactant on Mass Transfer coefficient in Pulsed Packed Column [Volume 19, Issue 66, 2021, Pages 141-156]
  • Nasrabadi, Mehdi Assessment of thermocline zone’s effective parameters on thermal energy storage systems [Volume 19, Issue 64, 2021, Pages 15-25]
  • Nasrabadi, Mehdi Performance analysis of a thermal energy storage system connected to a cooling tower for chilled water production of radiant ceiling [Volume 21, Issue 73, 2023, Pages 187-200]
  • Nasrollahi, Mahdi Developing a closed-loop green supply chain network design in uncertain space [Volume 20, Issue 68, 2022, Pages 165-187]
  • Navayi Neya, RESPONSE MODIFICATION FACTOR OF SPECIAL STEEL TRUSS MOMENT FRAMES [Volume 11, Issue 32, 2013, Pages 43-56]
  • Navid Chakherlou, Tajbakh Modeling of fatigue life in double shear lap joints using artificial neural networks [Volume 15, Issue 49, 2017, Pages 55-63]
  • Navidi, hamidreza A NOVEL MODEL FOR DECISION–MAKING ON OPEC PRODUCTION LEVEL BASED ON OIL PRICE PREDICTION AND GAME THEORY [Volume 11, Issue 35, 2013, Pages 63-76]
  • Nayeri, Mahdieh Design and simulation of Penternary adder based on GNRFET [Volume 18, Issue 63, 2020, Pages 41-50]
  • Nayeri, Maryam Design and simulation of Penternary adder based on GNRFET [Volume 18, Issue 63, 2020, Pages 41-50]
  • Nayeri, Maryam Study of the electronic and optical properties of doped gallium sulfide monolayer by first principles calculations [Volume 20, Issue 68, 2022, Pages 47-58]
  • Nayeri, Maryam Synthesis of WS2 nanometer monolayer by the chemical vapor deposition method [Volume 21, Issue 73, 2023, Pages 63-69]
  • Nazari, Alireza Simulation of Fracture in First Mode Through Debonding of Composite Skin from Elastomeric Foam Core in Sandwich Beams [Volume 22, Issue 77, 2024, Pages 57-67]
  • Nazari, F. Investigation of welding parameters effect on Nuget size in resistance spot welding of Magnesium alloys [Volume 14, Issue 44, 2016, Pages 1-9]
  • Nazari, Fakhroddin Compliance of Time Sensitive Network Protocol with the Specifications of MIL-STD-1553B Standard for Aviation Applications [Volume 22, Issue 79, 2024, Pages 99-108]
  • Nazari, Foad Parametric analysis and optimization of the supercritical ejector refrigeration cycle with different working fluids using Artificial neural network and particle swarm optimization algorithm [Volume 15, Issue 50, 2017, Pages 121-133]
  • Nazemi, A CONCEPTUAL MODEL FOR RECOGNITION OF IMPROVEMENT PRIORITIES: INTEGRATING PERFORMANCE GAP AND FUZZY GROUP-AHP [Volume 9, Issue 27, 2011, Pages 1-12]
  • Nazemi, A CONCEPTUAL MODEL FOR RECOGNITION OF IMPROVEMENT PRIORITIES: INTEGRATING PERFORMANCE GAP AND FUZZY GROUP-AHP [Volume 9, Issue 27, 2011, Pages 1-12]
  • Nazemizadeh, Mostafa Design and analysis of a 2 dimensional micro-gripper by using of rotational displacement of clamped perpendicular micro-beams due to piezoelectric actuation [Volume 21, Issue 72, 2023, Pages 123-136]
  • Nazeri Tahrudi, Mohammad Comparing PAR and MPAR Models to Modeling the Monthly River Flow Rates Time Series Under the Influence of Meteorological Factors, The Case Study: Nazloochai River [Volume 16, Issue 52, 2018, Pages 183-191]
  • Neamatollahi, Peyman Qualitative Evaluation of Clusters in Wireless Sensor Networks Using Fuzzy Logic [Volume 21, Issue 73, 2023, Pages 93-102]
  • Negahban Vasheghani, Negin Experimental and numerical investigation of energy absorption of foam-filled cylindrical tubes with initiator [Volume 14, Issue 44, 2016, Pages 69-78]
  • Negahdari, Mohammadreza Simulation study of a semi_circular Caisson Breakwater in a Non-uniform State in a Shallow Water Situation [Volume 18, Issue 60, 2020, Pages 183-199]
  • Nejad Khairullah, Mohsen Providing an expert system with the help of Arithmetic meta-heuristic algorithm to diagnose the infectious disease of covid-19 [Volume 21, Issue 73, 2023, Pages 47-61]
  • Nekooei, Masoud Identifying damage location and severity in a template platform located in Persian Gulf using the Improved modal strain energy [Volume 19, Issue 67, 2021, Pages 167-179]
  • Nekufar, Mohamad Developing a Boundary Point Method Algorithm for Solving Linear Programming Problems with Feasible Initial Solution [Volume 17, Issue 56, 2019, Pages 85-99]
  • Nemati, Ramin Site selection by Monte Carlo method and integration with brute-force search and genetic algorithm by using image processing approach (Case study: Fuel station in Tabriz city) [Volume 17, Issue 57, 2019, Pages 27-39]
  • Nemati, Reza Numerical Solution of the Effect of Increasing the Wall Temperature on Flow and Heat Transfer in Pulsating Heat Pipe [Volume 18, Issue 60, 2020, Pages 13-25]
  • Nemati-Abozar, Vahid A Combination of Fuzzy AHP and TOPSIS Method for the Supplier Selection Problem (Case Study: Advertising Company) [Volume 15, Issue 48, 2017, Pages 217-229]
  • Nemati Keshteli, Ramezan Scheduling of jobs and maintenance activities in an unrelated parallel machines environment [Volume 17, Issue 58, 2019, Pages 233-247]
  • Nemati lay, Ebrahim Optimizing the coefficients of the particle swarm optimization algorithm to solve the problem of economic dispatching to reduce the emission of environmental pollutants [Volume 21, Issue 75, 2023, Pages 297-307]
  • Nematinejad, Masoud Finite Element and Experimental Analysis of Bond Behavior Between Reinforcement and Concrete Containing Fibers, Silicafume and Nanosilica [Volume 16, Issue 54, 2018, Pages 153-166]
  • Nematollahi, Mohammadreza A mathematical model for coordinating corporate social responsibility and order quantity in pharmaceutical supply chain [Volume 15, Issue 50, 2017, Pages 245-260]
  • Nematollahzadeh, Ali Investigating the Effect of Deactivation Rate Constant of Polymer-Based Silver Catalyst on the Reduction of Pollutant 4-Nitrophenol to 4-Aminophenol [Volume 22, Issue 77, 2024, Pages 117-127]
  • Nematpour keshteli, Abolfazl Numerical Investigation of the Behavior of Solidification in a Triplex Tube Heat Exchanger Containing Phase Change Material using Fin [Volume 17, Issue 57, 2019, Pages 327-338]
  • Neyshabouri, Yousef A Control Strategy for Cascaded H-Bridge Based STATCOM with Unequal Capacitive DC Links Based on Model Predictive Method [Volume 21, Issue 73, 2023, Pages 31-45]
  • Neyshabouri, Yousef Control of Induction Motor Drive based on Nested Neutral Point Clamped Inverter using Finite Control-Set Model Predictive Method [Volume 21, Issue 74, 2023, Pages 275-290]
  • Nezhadshahmohammad, Farshad A molecular dynamics study on the wettability property of modified hydrophilic quartz (001) surface with hydrophobic nanoparticles [Volume 21, Issue 73, 2023, Pages 229-240]
  • Niasati, Mohsen Analysis of Transformer Insulation Risk Due to Back Flashover Lightning on High Voltage Substations by Considering the Effect of Environmental Pollution [Volume 22, Issue 76, 2024, Pages 123-139]
  • Nikkhah, Mohammad Hasan Intelligent consumption management of residential buildings with the help of energy hub in the presence of multiple energy carriers [Volume 21, Issue 74, 2023, Pages 21-35]
  • Nikoobin, Amin Optimal Trajectory Planning and Repetitive Balancing for Mobile Robots in High-Speed Motions [Volume 14, Issue 47, 2016, Pages 141-153]
  • Nikoobin, Amin Determining the Range of Admissible Acceleration of Suspended Cable Robot [Volume 16, Issue 54, 2018, Pages 387-402]
  • Nikoobin, Amin Optimal Dynamic Manipulation Workspace of a Single Link Robot Manipulator [Volume 16, Issue 54, 2018, Pages 429-441]
  • Nikooei Mahani, Mehdi Generating Random Samples Using Response Surface Methodology without need to Distribution of Parameters [Volume 16, Issue 54, 2018, Pages 139-152]
  • Nikoukar, Javad Presenting A New Method for Identifying the Initial Events of Cascading Failures with the Aim of Analyzing the Vulnerability of the Power System [Volume 19, Issue 67, 2021, Pages 191-205]
  • Nikoukar, Javad Planning the Production Power of Thermal, Wind and Solar Units Using the Sine Cosine Algorithm [Volume 22, Issue 76, 2024, Pages 257-271]
  • Nimafar, Mohammad Effect of Magnetic Field and Hybrid Nanofluid on Heat Transfer Through a Microchannel [Volume 22, Issue 78, 2024, Pages 185-199]
  • Niroomand, ENERGY AND EXERGY ANALYSIS OF POWER GENERATION SYSTEM OF A MARINE DIESEL ENGINE [Volume 9, Issue 25, 2011, Pages 47-56]
  • Nobil, Amirhossein Economic Order Quantity for Growing Items with Discrete Orders [Volume 17, Issue 56, 2019, Pages 123-129]
  • Nobil, Amir Hossein Lot sizing with defective item under warehouse limitation and construction costs [Volume 15, Issue 51, 2017, Pages 43-50]
  • Noohi, Hafez Design and Implementation of Adaptive Parallel Resonant Converter in Variable Tank Parameters [Volume 13, Issue 43, 2016, Pages 129-141]
  • Noorabadi, DESIGN OF ANISOGRID CONICAL LATTICE STRUCTURES [Volume 9, Issue 27, 2011, Pages 13-21]
  • Noori, Alireza Using the integrated passenger and vehicle simulation in evaluation of subway scheduling strategies (Case study of line one- Tehran subway) [Volume 19, Issue 66, 2021, Pages 121-129]
  • Noroozi, NUMERICAL SIMULATION OF MIXED CONVECTION OF FLUID FLOW AND HEAT TRANSFER WITHIN CAR RADIATOR WITH AN INSIDE HOT OBSTACLE FILLED WITH NANOFLUID [Volume 9, Issue 25, 2011, Pages 33-46]
  • Noroozi, Amir modeling and Solution of a Multi-Objective Portfolio Selection by using a Simulated Annealing [Volume 14, Issue 45, 2016, Pages 99-109]
  • Noroozi Jajarm, Elaheh Investigation of the Effect of Green Double Skin Facades on Energy Consumption of High-rise Buildings in Tehran's Climatic Conditions [Volume 17, Issue 56, 2019, Pages 51-61]
  • Norouz, Mohammad Using the porous medium to improve the forced convective heat transfer in the channel and its numerical analysis with lattice Boltzmann method [Volume 17, Issue 58, 2019, Pages 28-39]
  • Norouzi, Mahmod Numerical investigation of vortices effect on the pressure drop and flow loss in a channel with planar gradual expansion [Volume 15, Issue 48, 2017, Pages 45-60]
  • Nory, faramarz Robust-possibilistic optimization method at design of a pharmaceutical supply chain network under uncertainty and discount on purchase the raw material [Volume 17, Issue 58, 2019, Pages 249-266]
  • Nosrstollahi, Mehran Design, construction, modeling and estimation of the second stage linear model of laboratory drone with cold gas thrusters based on genetic algorithm [Volume 22, Issue 77, 2024, Pages 1-12]
  • Nouri Qarahasanlou, Ali Observed and Un-Observed Covariate Effects on Baseline Hazard Rate - Case study: Jajarm Bauxite Mine [Volume 17, Issue 59, 2019, Pages 225-243]
  • Nouri Qarahasanlou, Ali The Application of Frailty Model in Remaining Useful Life Estimation (Case Study: Sungun Copper Mine's Loading System) [Volume 18, Issue 62, 2020, Pages 129-142]
  • Nourouzi, Rouhallah complete modelling of a rotor-bearing-housing system [Volume 14, Issue 44, 2016, Pages 79-92]
  • Nowroozzadeh, Reza Evaluation of Chahchahe Earth Dam Behaviour during Construction and First Impoundment Stage Using the Results of Monitoring and Back Analysis [Volume 17, Issue 59, 2019, Pages 11-24]
  • Nozari, Hamed Stream Flow Prediction Using Support Vector Machine Based on Discharge and Precipitation Time series on Upstream Stations (Case Study: Taleh Zang Hydrometric Station) [Volume 16, Issue 54, 2018, Pages 95-104]
  • Nozari, Milad Presenting a model for production and transportation scheduling in automotive industry (a case study: Iran Khodro) [Volume 16, Issue 52, 2018, Pages 299-309]
  • Nozarian, Mahdi Analysis of Emergent Behavior of Reliability in the System of Systems Including Energy Hubs [Volume 19, Issue 66, 2021, Pages 1-21]

O

  • Okhravi, A CONCEPTUAL MODEL FOR RECOGNITION OF IMPROVEMENT PRIORITIES: INTEGRATING PERFORMANCE GAP AND FUZZY GROUP-AHP [Volume 9, Issue 27, 2011, Pages 1-12]
  • Olamaei, Javad A Generalized Bidirectional Structure for Multi-Level Inverter with Low Number of Power Electronic Devices [Volume 19, Issue 66, 2021, Pages 37-51]
  • Olyaee, Saeed Design and Modeling of Biosensor Based on Photonic Crystal Nano Resonator [Volume 15, Issue 51, 2017, Pages 351-358]
  • Omer Anvar, Halo A New Deep Vision-Based Identifier As An Intelligent Herbicide Spraying Agent For Potato Farm Application [Volume 22, Issue 79, 2024, Pages 79-97]
  • Omidvar, Babak Provide a model for the seismic damage Assessment to buried fuel pipelines in Kermanshah [Volume 13, Issue 41, 2015, Pages 27-45]
  • Ommi, Fathollah Numerical Study of Staged Transverse Injection of Sonic Jets into Supersonic Crossflows behind a Step [Volume 17, Issue 56, 2019, Pages 281-291]
  • Omrani, Mehdi An Integrated Model to Develop Semi-Quantitative Scenarios Using a hybrid Method Based on Fuzzy Cognitive Map: A Case Study of Iranian Oil Production [Volume 17, Issue 56, 2019, Pages 157-168]
  • Orouji, DESIGN AND SIMULATION OF A MULTILAYER SOI-MOSFET STRUCTURE FOR IMPROVING SELF-HEATING EFFECTS [Volume 8, Issue 23, 2011, Pages 19-23]
  • Orouji, Ali A. 4H-SiC MESFET with darin-side and undoped region for modifying charge distribution and high power applications [Volume 13, Issue 43, 2016, Pages 121-127]
  • Oroumiyeh, Mahya An Improved two-layer Model in the Logical Level Data Warehouse Designing [Volume 16, Issue 54, 2018, Pages 21-37]
  • Ostadi, Bakhtiar Revenue Management Under Variable Resource Capacity Requirements and Importance Factor for Patient Classes in Hospitals [Volume 16, Issue 54, 2018, Pages 257-265]
  • Ostovari, Fatemeh Synthesis of WS2 nanometer monolayer by the chemical vapor deposition method [Volume 21, Issue 73, 2023, Pages 63-69]
  • Oudi, Amirhossein Optimizing the coefficients of the particle swarm optimization algorithm to solve the problem of economic dispatching to reduce the emission of environmental pollutants [Volume 21, Issue 75, 2023, Pages 297-307]
  • Oudi, Amirhossein Adjustment of Optimal Parameters to Control the Temperature in Different Conductors [Volume 22, Issue 77, 2024, Pages 107-116]
  • OzvAminian, M. MODELING AND SIMULATION OF THERMOMECHANICAL STRESSES AND RESIDUAL STRESSES IN RESISTANCE SPOT WELDING BETWEEN TWO SHEETS OF MLPG METHOD [Volume 11, Issue 34, 2013, Pages 63-75]

P

  • Pajand, GEOMETRICAL MODELS FOR OPTIMUM SHAPE OF CONCRETE ARCH DAMS [Volume 8, Issue 20, 2010, Pages 1-15]
  • Pajand, Formulating three triangular elements for plate bending [Volume 8, Issue 23, 2011, Pages 1-17]
  • Pajand, A TECHNIQUE FOR IMPROVING DYNAMIC RELAXATION METHOD [Volume 9, Issue 24, 2011, Pages 39-52]
  • Palizvan, Mohammad The effect of fiber-matrix interface properties on damage behavior of composite materials [Volume 18, Issue 63, 2020, Pages 113-129]
  • Parivar, Hossein Design, Modeling and Optimization of a High-speed Permanent Magnet Synchronous Machine with Retention Sleeve of Rotor using Taguchi Optimization Method [Volume 21, Issue 75, 2023, Pages 161-179]
  • Parsaeimehr, Elham An ensemble deep learning model to enhance feature representation for entity detection [Volume 20, Issue 69, 2022, Pages 103-112]
  • Parvasi, Payam Simulation and Modification of The Process at The Gas Compression Station to Reduce Fuel Consumption and Environmental Pollution [Volume 18, Issue 62, 2020, Pages 83-97]
  • Parvini, Mehdi Consequence modeling for chlorine release of a storage tank with the field experiment data [Volume 12, Issue 38, 2014, Pages 15-25]
  • Pasbani Asl, Saeed Single allocation hub location problem considering zero-one uncertain demands [Volume 19, Issue 66, 2021, Pages 157-173]
  • Paydar, Mohamad Mahdi Developing metaheuristic approaches to solve flow shop scheduling problem with worker assignment [Volume 16, Issue 54, 2018, Pages 283-293]
  • Pazoki, AN INTELLIGENT METHOD FOR DETECTION AND CLASSIFICATION OF POWER QUALITY EVENTS [Volume 9, Issue 27, 2011, Pages 23-36]
  • Pazoki, Mohammad Efficient Method for Fault Classification in Transmission Line Using Kernel Naive Bayes Classifier [Volume 16, Issue 52, 2018, Pages 119-129]
  • Pazoki, Mohammad A New Fault Detection and Classification Scheme in MTDC Grids with Hybrid Cable and Overhead Transmission Line [Volume 22, Issue 76, 2024, Pages 141-154]
  • Pedram, Omid Simulation of pitting corrosion behavior of CUSTOM 450 stainless steel by COMSOL software and DIC method [Volume 19, Issue 65, 2021, Pages 29-39]
  • Pezeshki, Javad Investigating the effect of laser shock process on fracture and fatigue properties of 2024-T351 aluminum alloy using numerical modeling [Volume 21, Issue 75, 2023, Pages 67-82]
  • Pheili Monfared, Amir Ehsan Modeling and Reduction of Nox Production in Submerged Combustion Vaporizer Using Fuzzy Inference System [Volume 22, Issue 76, 2024, Pages 197-211]
  • Pichan, Mohammad Modelling and digital-based direct power control of shunt active power filter for rectifier loads [Volume 21, Issue 72, 2023, Pages 99-109]
  • Pichan, Mohammad Modelling and Extraction of Current Harmonic Components based on Instantaneous Power Theory for Shunt Active Filter under Weak Grid [Volume 22, Issue 76, 2024, Pages 27-44]
  • Pirkandi, Jamasb DEVELOPMENT OF A DYNAMIC MODEL FOR SIMULATION OF REAL-TIME TRANSIENT TURBOJET ENGINE PERFORMANCE IN SIMULINK [Volume 15, Issue 50, 2017, Pages 95-108]
  • Pirkhalili, Ali asghar Numerical Simulation of Fluid Flow with Real Viscosity in a Centrifugal Pump by SPH Method [Volume 21, Issue 73, 2023, Pages 119-133]
  • Pishvaee, Mir saman A reliable closed-loop supply chain network design under uncertainty: A case study of a lead-acid battery manufacturer [Volume 12, Issue 39, 2014, Pages 45-60]
  • Pishvaei, Mir Saman A robust multi objective model for forward – reverse supply chain designing based on social responsibility [Volume 14, Issue 47, 2016, Pages 171-185]
  • Poorreza, Elnaz Synthesis and characterization of hydrophobised magnetite nanoparticles for production of liquid marbles and modeling of liquid marble deformation under the gravity effect [Volume 21, Issue 75, 2023, Pages 53-66]
  • PoorShahsavar, Hadi THREE DIMENSIONAL BUCKLING ANALYSIS OF FG CYLINDRICAL PANELS UNDER VARIOUS THERMAL LOAD CONDITIONS [Volume 14, Issue 46, 2016, Pages 39-50]
  • Pourfar, Iman Modeling Doubly Fed Induction Generator Based Wind Farms by Aggregating the Mechanical Parts Using Clustering by Power Coefficient [Volume 18, Issue 60, 2020, Pages 169-182]
  • Pourgholi, Reza Segmentation of Corridor Images for Structure Based Robot Navigation [Volume 20, Issue 70, 2022, Pages 225-241]
  • Pourhabili, Sajjad Appropriate Numerical Modelling for Simulation of Root Airfoils of Horizontal Axis Wind Turbine [Volume 21, Issue 72, 2023, Pages 137-146]
  • Pourjenabi, NUMERICAL MODELING OF GROUND VIBRATIONS DUE TO DYNAMIC COMPACTION PROCESS IN DRY SANDS [Volume 11, Issue 32, 2013, Pages 1-9]
  • Pourmahmoud, Nader Numerical investigation of the effect of air distribution methods on the cooling capacity in data centers [Volume 20, Issue 68, 2022, Pages 35-46]
  • Pourmoayed, DEVELOPMENT OF A REVERSE ENGINEERING PROCEDURE FOR UPGRADING AND MANUFACTURING OF LEGACY MECHANICAL AND STRUCTURAL COMPONENTS [Volume 10, Issue 28, 2012, Pages 69-82]
  • Pourmohammadi, hadi Deep learning framework to extract anatomy for mosquito image classification [Volume 20, Issue 70, 2022, Pages 107-120]
  • Pourrajabian, Abolfazl Techno-economic evaluation of using ice storage systems based on the new requirements of the draft of the fourth edition of the National Building Regulations, Article 19 [Volume 18, Issue 63, 2020, Pages 65-72]
  • Poursaeidi, Esmaeil Simulation of pitting corrosion behavior of CUSTOM 450 stainless steel by COMSOL software and DIC method [Volume 19, Issue 65, 2021, Pages 29-39]
  • Pouyan, Ali Akbar Simulation and Implementation of Obstacle Avoidance and Synchronization Tasks using Probabilistic and Timed Supervisory Control Theory in Swarm Robotics [Volume 16, Issue 55, 2018, Pages 175-190]
  • Pouyan, Ali Akbar Anomaly Detection using LSTM AutoEncoder [Volume 17, Issue 56, 2019, Pages 191-211]
  • Pouyan, Ali Akbar Modelling of Overlapping by Community Detection Algorithms in Social Networks: A Review [Volume 17, Issue 56, 2019, Pages 247-265]

Q

  • Qods, SIMULATION AND INVESTIGATION OF RING COMPRESSION TEST FOR FRICTION MEASURMENT IN HOT FORGING PROCESS [Volume 10, Issue 31, 2012, Pages 59-67]

R

  • R, S Numerical investigation of counter flow polymer exchange membrane fuel cell with two channel [Volume 16, Issue 53, 2018, Pages 39-51]
  • Rabbani, Farzaneh Assessment of thermocline zone’s effective parameters on thermal energy storage systems [Volume 19, Issue 64, 2021, Pages 15-25]
  • Rabbani, Farzaneh Performance analysis of a thermal energy storage system connected to a cooling tower for chilled water production of radiant ceiling [Volume 21, Issue 73, 2023, Pages 187-200]
  • Rabie, Naghmeh Optimizing Pricing and Lot Sizing Decisions in a Supply Chain under Quantity Discount contract [Volume 16, Issue 54, 2018, Pages 241-255]
  • Rabiee, Ataollah Optimum Geometric Position of Detectors Around Thick Hydrocarbon Pipes for Deposition Pattern Detection and Scale Thickness Measurement [Volume 22, Issue 77, 2024, Pages 69-78]
  • Rabiee, Hamid R. Epidemic Modeling and Flattening the Infection Curve in Social Networks [Volume 22, Issue 76, 2024, Pages 155-165]
  • Rad, NUMERICAL MODELING OF FLOW AROUND CATAMARAN VESSEL AND CALCULATION OF HYRODYNAMIC RESISTANCE BY COMPUTATIONAL FLUID DYNAMICS [Volume 11, Issue 32, 2013, Pages 29-41]
  • Radmanesh, Hamid Modeling and evaluation of technical, economical and environmental performance of molten carbonate fuel cell compared to micro turbine gas for the production of electricity and heat simultaneously [Volume 16, Issue 55, 2018, Pages 411-426]
  • Radmehr, Masoud Modelling of Distributed Energy Resources Management in Microgird using Distributed Algorithm [Volume 17, Issue 57, 2019, Pages 241-252]
  • Radmehr, Mojtaba Fuzzy Sliding Mode Control for Tracking the Optimal profile of Train Speed in the Presence of Uncertainty [Volume 20, Issue 68, 2022, Pages 139-152]
  • Raeesi Vanani, iman Presenting a circular supply chain optimization model under uncertainty: the case of MDF industry [Volume 21, Issue 74, 2023, Pages 207-230]
  • Raeisi, Hamid Determination Optimum Location of Outrigger and Belt Truss System in Tall Buildings with Non-Uniform Cross Section [Volume 16, Issue 53, 2018, Pages 289-297]
  • Rafee, NUMERICAL STUDY OF THE EFFECTIVE PARAMETERS ON THE PERFORMANCE OF EDDY INTERACTION MODEL FOR A WAVE-PLATE MIST ELIMINATOR [Volume 10, Issue 31, 2012, Pages 69-84]
  • Rafee, Roohollah Second law analysis of nanofuid laminar flow in a counter-flow heat exchanger [Volume 13, Issue 41, 2015, Pages 47-57]
  • Rafee, Roohollah Numerical Study on the Effects of Extended Surfaces on the Performance of a Coaxial Geothermal Heat Exchanger [Volume 22, Issue 76, 2024, Pages 167-175]
  • Rafeeyan, Mansour complete modelling of a rotor-bearing-housing system [Volume 14, Issue 44, 2016, Pages 79-92]
  • Rafiei, MODELING OF ROTARY REGENERATORS [Volume 10, Issue 28, 2012, Pages 9-18]
  • Rafiei Pour, Reza A Mathematical Model for optimization of Product Development Process [Volume 14, Issue 45, 2016, Pages 111-121]
  • Rahbar, N. PRODUCTIVITY IMPROVEMENT OF A TUBULAR SOLAR STILL, USING CFD SIMULATION [Volume 11, Issue 33, 2013, Pages 45-56]
  • Rahbar, N. PRODUCTIVITY IMPROVEMENT OF A TUBULAR SOLAR STILL, USING CFD SIMULATION [Volume 11, Issue 33, 2013, Pages 45-56]
  • Rahbar, Nader Numerical study on the effect of geometrical parameters on flare tip wall temperature and emission [Volume 13, Issue 40, 2015, Pages 43-57]
  • Rahbar Ranji, Ahmad Ultimate strength of stiffened plate with pitting corrosion and inclined crack under uniaxial compression [Volume 18, Issue 62, 2020, Pages 143-151]
  • Rahbar Shahrouzi, Javad Site selection by Monte Carlo method and integration with brute-force search and genetic algorithm by using image processing approach (Case study: Fuel station in Tabriz city) [Volume 17, Issue 57, 2019, Pages 27-39]
  • Rahgozar, Reza Determination Optimum Location of Outrigger and Belt Truss System in Tall Buildings with Non-Uniform Cross Section [Volume 16, Issue 53, 2018, Pages 289-297]
  • Rahgozar, Saeed Techno-economic evaluation of using ice storage systems based on the new requirements of the draft of the fourth edition of the National Building Regulations, Article 19 [Volume 18, Issue 63, 2020, Pages 65-72]
  • Rahi, Abbas Equivalent Stiffness Calculation of a Journal Bearing by Analytical Approach for Vibrational Modeling [Volume 17, Issue 59, 2019, Pages 129-139]
  • Rahideh, Hossein Dynamic Modeling of Charge and Discharge of Adsorbed Natural Gas storage Tank [Volume 16, Issue 54, 2018, Pages 309-326]
  • Rahimi, Simulation of degradation reactions of Biodegradable Poly-lactic acid polymer in the human body [Volume 9, Issue 24, 2011, Pages 29-38]
  • Rahimi, Amir Mathematical Modeling of CO2 Removal in a Venturi Scrubber and Parametric Study on the Effect of Evaporation/Condensation of Droplets and Cooling Effect of Evaporation [Volume 12, Issue 37, 2014, Pages 15-24]
  • Rahimi, Saeed Simulation and evaluation of the performance of various sensor-sensing silicones to detect methane-soluble in fermentation process [Volume 17, Issue 58, 2019, Pages 329-336]
  • Rahimian, SYSTEM DYNAMIC MODELING OF MULTIPURPOSE RESERVOIR OPERATION TO ESTIMATE THE OPTIMAL HEIGHT OF THE DAM [Volume 8, Issue 21, 2010, Pages 57-65]
  • Rahimimanesh, Amir Providing a mathematical optimization model for the multi-product supply chain despite the possibility of supplier disruption under sanctions (Case Study of Refinery Repair Industries) [Volume 18, Issue 60, 2020, Pages 107-125]
  • Rahimi Rezaei, Amin Coordination of Wind Power Plants and Energy Storage Devices in Security-Constrained Unit Commitment Problem Using Robust Optimization [Volume 16, Issue 53, 2018, Pages 207-220]
  • Rahimnejad, Maedeh Molecular dynamics simulation of interaction of the anti-cancer drug paclitaxel with the cell membrane: investigation of changes in van der Waals energy and center of mass [Volume 17, Issue 57, 2019, Pages 15-25]
  • Rahimpour, Esmaeel Numerical Investigation of the Strain Stiffening Behavior of Mesenchymal Stem Cells on Elastic Substrates [Volume 16, Issue 55, 2018, Pages 351-359]
  • Rahmani, INVESTIGATION OF THE BEHAVIOR FACTOR IN DUAL SYSTEMS WITH SIDE PLATE CONNECTION [Volume 8, Issue 21, 2010, Pages 67-82]
  • Rahmani, ANALYTICAL SOLTION AND SIMULATION OF DYNAMIC STRESS INTENSITY FACTOR AND STRESS FILED DETERMINATION ON THE CRACKED PLATE UNDER BLAST LOADING [Volume 10, Issue 29, 2012, Pages 71-80]
  • Rahmani, Ali Revenue Management Under Variable Resource Capacity Requirements and Importance Factor for Patient Classes in Hospitals [Volume 16, Issue 54, 2018, Pages 257-265]
  • Rahmani, Hossein Comparing the optimization of prestressed concrete bridge deck according to the AASHTO LRFD and AASHTO standard procedures using Cuckoo algorithm. [Volume 16, Issue 55, 2018, Pages 209-219]
  • Rahmani, Hossein Kinematics and workspace analysis of a 3DOF parallel reconfigurable robot [Volume 21, Issue 73, 2023, Pages 171-185]
  • Rahmani, Morteza Multi objective Model of airport gate scheduling problem using NSGA-II algorithm and epsilon constraint [Volume 15, Issue 51, 2017, Pages 397-410]
  • Rahmani, Omid Vibration control of laminated composite beam with magnetostrictive layers [Volume 15, Issue 48, 2017, Pages 1-13]
  • Rahmani, Saeid An Investigation into the Relationships Determining Ball Trajectory in Mills by Using the Physical Modelling [Volume 17, Issue 58, 2019, Pages 203-214]
  • Rahmani, Yousef Investigation of the forced convection heat transfer in the presence of radiation in metal foams using HPM [Volume 14, Issue 46, 2016, Pages 1-9]
  • Rahmat, Neda Analytical solution of nonlinear rolling motion of ship using the method of multiple scales [Volume 15, Issue 49, 2017, Pages 125-137]
  • Rahmati, MODELING AND NUMERICAL ANALYSIS OF THYRISTOR BASED CONVERTERS BY MULTI-VARIABLE RUNGE-KUTTA ALGORITHM [Volume 10, Issue 29, 2012, Pages 33-42]
  • Rahmati, Mahmoud Modeling and Reduction of Nox Production in Submerged Combustion Vaporizer Using Fuzzy Inference System [Volume 22, Issue 76, 2024, Pages 197-211]
  • Raissi Dehkordi, Alireza Evaluation of steel plate shear walls based on performance based plastic design [Volume 15, Issue 51, 2017, Pages 381-396]
  • Raissi Dehkordi, Morteza Seismic Evaluation of Steel Moment Frames Rehabilitated with CBF, EBF and BRBF Braced Systems [Volume 14, Issue 47, 2016, Pages 95-114]
  • Rajabi-Ghahnavieh, Abbas Model-based Building Retrofit: Experiences at Sharif University of Technology [Volume 21, Issue 75, 2023, Pages 239-254]
  • Rajabi Khanghahi, Abbas Simultaneously Optimization of Solar Water Heater Design Parameters Considering Consumption Patterns [Volume 15, Issue 48, 2017, Pages 111-123]
  • Rajabi Zargarabadi, Mehran Film cooling effectiveness enhancement of rotating turbine blade using Shaped holes [Volume 15, Issue 51, 2017, Pages 225-236]
  • Rajabpour, OPTIMIZATION OF PRISMATIC CORE SANDWICH PANEL BASED ON PARTICLE SWARM ALGORITHM [Volume 8, Issue 20, 2010, Pages 17-26]
  • Rajabpour, Ali The effect of hydrogen functionalization on the thermal properties of coiled carbon nanotubes [Volume 21, Issue 74, 2023, Pages 153-162]
  • Rajabzadeh Ghatari, Ali Hierarchical Clustering of Residential Appliances Considering the Characteristics of the Appliances [Volume 22, Issue 78, 2024, Pages 283-296]
  • Raji, Mojtaba Numerical simulation and theoretical study on effects of operating parameters in Persian Gulf desalination using vacuum membrane distillation [Volume 16, Issue 55, 2018, Pages 41-49]
  • Rakhshani Mehr, Mehrallah Seismic risk analysis and mapping acceleration Nishapur city [Volume 15, Issue 50, 2017, Pages 211-223]
  • Ramezani, WIND FARM EFFECTS ON TOTAL TRANSFER CAPABILITY [Volume 10, Issue 30, 2012, Pages 61-75]
  • Ramezani, Mohsen A New Deep Vision-Based Identifier As An Intelligent Herbicide Spraying Agent For Potato Farm Application [Volume 22, Issue 79, 2024, Pages 79-97]
  • Ramezani, Nabiollah CT Saturation Detection with Calculation of Instantaneous Impedance of Magnetic Branch Using FILT [Volume 15, Issue 51, 2017, Pages 371-380]
  • Ramezani, Zeynab 4H-SiC MESFET with darin-side and undoped region for modifying charge distribution and high power applications [Volume 13, Issue 43, 2016, Pages 121-127]
  • Ranjbar, INVESTIGATION OF TEMPERATURE DISTRIBUTION IN THE DISCHARGE MACHINING STEEL P20 [Volume 9, Issue 27, 2011, Pages 73-79]
  • Ranjbar, Abolfazl The Assessment and Comparison of a Genetic Algorithm, Simulated Annealing and Cuckoo Optimization Algorithm for Optimization of the Facility Location under Competitive Conditions (Case Study: Banks) [Volume 15, Issue 48, 2017, Pages 231-246]
  • Ranjbar, Babak Decentralized Adaptive Fuzzy Sliding Mode Observer Design for Large-Scale Systems with Unknown Interconnections in the presence of Lumped Perturbation [Volume 19, Issue 64, 2021, Pages 77-86]
  • Ranjbar, Esmaeel Extraction of circuit parameters using multi-objective genetic algorithm for design of non-linearly compensated operational amplifiers [Volume 17, Issue 58, 2019, Pages 127-142]
  • Ranjbar, Fatemehzahra Determination of Young's modulus of Boron Nitride nano tubes using energy method [Volume 21, Issue 73, 2023, Pages 159-169]
  • Ranjbar Noiey, Abolfazl Decentralized Adaptive Fuzzy Sliding Mode Observer Design for Large-Scale Systems with Unknown Interconnections in the presence of Lumped Perturbation [Volume 19, Issue 64, 2021, Pages 77-86]
  • Raoufinia, Marjan Development of a dynamic game theory model for analyzing competition in the oligopoly markets (Feedback Approach) [Volume 17, Issue 59, 2019, Pages 263-276]
  • Rasekh, Behnam Simulation and evaluation of the performance of various sensor-sensing silicones to detect methane-soluble in fermentation process [Volume 17, Issue 58, 2019, Pages 329-336]
  • Rashidi, Saman Numerical Study on the Effects of Extended Surfaces on the Performance of a Coaxial Geothermal Heat Exchanger [Volume 22, Issue 76, 2024, Pages 167-175]
  • Rashki, Mohsen Probabilistic Investigation of Cavitation Occurrence on Morning-Glory Spillways Using Numerical Modeling and Response Surface Method [Volume 22, Issue 78, 2024, Pages 201-216]
  • Rashno, Abdolreza Automatic Speaker Recognition based on Gabor Features and Convolutional Neural Networks [Volume 21, Issue 72, 2023, Pages 49-67]
  • Rashno, Abdolreza Speaker Recognition Using Convolutional Neural Network and Neutrosophic [Volume 21, Issue 75, 2023, Pages 1-18]
  • Rasooli, Mahmood Determining the Range of Admissible Acceleration of Suspended Cable Robot [Volume 16, Issue 54, 2018, Pages 387-402]
  • Rasoolzadegan, Abbas The Quantitative Measurement of Software Components Reusability: Methods, Applications, Challenges [Volume 14, Issue 46, 2016, Pages 97-122]
  • Rasoolzadegan, Abbas A Systematic Literature Review on Software Reliability Modeling [Volume 15, Issue 50, 2017, Pages 285-313]
  • Rasoolzadegan, Abbas A Systematic Review of Intrusion Detection using Hidden Markov Models: Approaches, Applications, and Challenges [Volume 16, Issue 53, 2018, Pages 183-206]
  • Rastegar, ANALYSIS OF EXERGY IN NATURAL GAS IN REDUCTION CITY GATE STATION [Volume 8, Issue 22, 2010, Pages 13-19]
  • Rastgoo, Razieh Face recognition using fine-tuning of Deep Convolutional Neural Network and transfer learning [Volume 17, Issue 58, 2019, Pages 103-111]
  • Rastgoo, Razieh Spoken Persian digits recognition using deep learning [Volume 21, Issue 74, 2023, Pages 163-172]
  • Rastgoo, Razieh Deepfake image detection using a deep hybrid convolutional neural network [Volume 21, Issue 75, 2023, Pages 19-28]
  • Rastgoo, Razieh A Transformer-Based Model for Abnormal Activity Recognition [Volume 22, Issue 76, 2024, Pages 213-221]
  • Ravaei, Bahman diagnosis of breast cancer at the molecular - cellular level with an artificial intelligence approach [Volume 21, Issue 72, 2023, Pages 19-30]
  • Razaghi, Reza Appropriate Numerical Modelling for Simulation of Root Airfoils of Horizontal Axis Wind Turbine [Volume 21, Issue 72, 2023, Pages 137-146]
  • Razavi, seyed Naser Query expansion using the clustering of pseudo relevant documents with query sensitive similarity [Volume 14, Issue 47, 2016, Pages 243-254]
  • Razavian, s FRICTIONAL MODELING AND OPTIMIZATION FOR A VIBRATION MODAL ANALYSIS SIMULATOR DEVICE USING GENETIC ALGORITHM [Volume 11, Issue 34, 2013, Pages 87-93]
  • Razavian Amrei, INVESTIGATION OF DETERIORATION OF HYSTERETIC LOOPS IN NONLINEAR STATIC ANALYSIS (PUSHOVER) FOR SPECIAL MOMENT RESISTING FRAME WITH SHEAR WALLS [Volume 10, Issue 30, 2012, Pages 33-41]
  • Razavian Amrei, Seyed Ali Development of PGA Attenuation Relationships for Iran [Volume 16, Issue 54, 2018, Pages 167-175]
  • Razavian Amrei, Seyed Ali Seismic Risk Assessment of Hamedan City [Volume 16, Issue 55, 2018, Pages 247-266]
  • Razavian Amrei, Seyed Amin Development of PGA Attenuation Relationships for Iran [Volume 16, Issue 54, 2018, Pages 167-175]
  • Razi-Ardakani, Hesamoddin Modeling and Analysis of Urban and Rural Bus Accidents [Volume 12, Issue 38, 2014, Pages 59-74]
  • Razzaghi, Javad Analytical and Numerical Modeling of Stress Intensity Factor in I-Shaped Cross Sections of Cracked Beams [Volume 17, Issue 56, 2019, Pages 131-142]
  • Razzazi, Mohhamdreza A Novel Model for Software Services Development Effort Estimation [Volume 15, Issue 49, 2017, Pages 245-261]
  • Refahi, AmirHossein Simulation of the Behavior of Non-Newtonian Fluids Dissolved in Water Inside Non-Concentric Rotating Cylinders [Volume 22, Issue 77, 2024, Pages 13-24]
  • Reisi, Hamideh Modeling and evaluation of Massey Ferguson tractor seat using finite element method [Volume 16, Issue 53, 2018, Pages 269-278]
  • Rezaee, M. Natural convection of Al2O3-water nanofluid with variable properties in a square enclosure with heat source and heat sink on the vertical walls [Volume 15, Issue 49, 2017, Pages 1-16]
  • Rezaeenour, Jalal Designing of a four-level closed loop Supply Chain Network with an Integration Approach for Economic, Environmental, and Social Responsibility about Employees [Volume 17, Issue 57, 2019, Pages 69-92]
  • Rezaei, BANDWIDTH BROADENING OF DIELECTRIC RESONATOR ANTENNA BY NON UNIFORM WIDTH [Volume 8, Issue 23, 2011, Pages 79-87]
  • Rezaei, Behnam Local and Remote Voltage and Reactive Power Control in the Presence of Induction Generators [Volume 16, Issue 52, 2018, Pages 83-96]
  • Rezaei, Habib Evaluation of Effective Parameters on Bearing Strength of Bolted Joints with GLARE Construction through FEM [Volume 18, Issue 60, 2020, Pages 39-52]
  • Rezaei, Masood A hybrid algorithm to solve the flexible oil refinery production planning problem [Volume 20, Issue 69, 2022, Pages 113-129]
  • Rezaei, Mohammad Javad Improving Performance of Germanium-Based Vertical Tunneling Field Effect Transistor Using GaAs as Channel [Volume 22, Issue 76, 2024, Pages 115-122]
  • Rezaei, Parham Modeling and Fault Detection of Quadrotor with Rotor Thrust Deviation Fault [Volume 19, Issue 67, 2021, Pages 245-262]
  • Rezaei, Parisa Fault Tolerant Control of Wind Turbine Systems using Fuzzy Sliding Mode Control [Volume 20, Issue 71, 2022, Pages 135-150]
  • Rezaei, pejman The UWB filter with using stepped-impedance method and improving out of band rejection [Volume 18, Issue 61, 2020, Pages 13-19]
  • Rezaei, Pejman Spider web structure as high impedance surfaces [Volume 12, Issue 38, 2014, Pages 75-82]
  • Rezaei, Pejman Directional Microstrip Antenna by using Metamaterial Superstrate in Fabry-Perot Cavity [Volume 13, Issue 42, 2015, Pages 17-25]
  • Rezaeian, Alireza Evaluation of steel plate shear walls based on performance based plastic design [Volume 15, Issue 51, 2017, Pages 381-396]
  • Rezaeipanah, Amin Optimization of MLP Neural Network Using the FinGrain Parallel Genetic Algorithm for Breast Cancer Diagnosis [Volume 17, Issue 57, 2019, Pages 173-186]
  • Rezaie, Behrooz Decentralized Adaptive Fuzzy Sliding Mode Observer Design for Large-Scale Systems with Unknown Interconnections in the presence of Lumped Perturbation [Volume 19, Issue 64, 2021, Pages 77-86]
  • Rezaie, Milad Proposing and Modeling an Ultrahigh Step-Up DC-DC Converter Including Two Stages Boost Converter, Switched Capacitor and Coupled Inductor [Volume 22, Issue 77, 2024, Pages 157-173]
  • Rezaie, Mohammad Reza Numerical simulation of the flow field and heat transfer inside the channel with different dimensions of spindle obstacles in the presence of power-law non-Newtonian fluids [Volume 21, Issue 73, 2023, Pages 147-157]
  • Rezayfar, Omid Damage identification of column under the axial load based on wavelet transform and modal data [Volume 18, Issue 63, 2020, Pages 51-64]
  • Rezazadeh Mofradnia, soheil Simulation and evaluation of the performance of various sensor-sensing silicones to detect methane-soluble in fermentation process [Volume 17, Issue 58, 2019, Pages 329-336]
  • Rezvani, ANALYTICAL SOLTION AND SIMULATION OF DYNAMIC STRESS INTENSITY FACTOR AND STRESS FILED DETERMINATION ON THE CRACKED PLATE UNDER BLAST LOADING [Volume 10, Issue 29, 2012, Pages 71-80]
  • Rezvani, ANALYTICAL SOLTION AND SIMULATION OF DYNAMIC STRESS INTENSITY FACTOR AND STRESS FILED DETERMINATION ON THE CRACKED PLATE UNDER BLAST LOADING [Volume 10, Issue 29, 2012, Pages 71-80]
  • Rezvani, Mohammad Javad Experimental and numerical investigation of energy absorption of foam-filled cylindrical tubes with initiator [Volume 14, Issue 44, 2016, Pages 69-78]
  • Rezvani, Mohammad Javad Manufacturing and analysis of dynamic and mechanical properties of rigid nanocomposite polyurethane foam reinforced by nano particles of SiC [Volume 16, Issue 53, 2018, Pages 1-7]
  • Rezvani, Mohammad Javad Effect of hole, angle and direction of applied oblique load on crashworthiness parameters of end capped circular tubes: A numerical simulation and experimental study [Volume 20, Issue 68, 2022, Pages 59-71]
  • Rezvani, Mohammad Javad Crashworthiness investigation of multi-component conical absorber with spherical cap under free inversion process: experimental study and numerical simulation [Volume 21, Issue 73, 2023, Pages 241-253]
  • Riahifar, R. SURFACE MELTING PHENOMENA MODELING OF DIFFERENT CRYSTALLOGRAPHIC PLANES, LAYER BY LAYER FOR COPPER [Volume 12, Issue 36, 2014, Pages 43-52]
  • Riazi, Roozbeh Blood flow analysis in the circle of Willis using computed tomography scan images and fluid-structure interactions method [Volume 17, Issue 57, 2019, Pages 285-294]
  • Rikhtegare Giasi, amir Robustness of Magnetic Levitation by Using Feedback Linearization Back-Stepping and Nonlinear Disturbance Observer [Volume 15, Issue 49, 2017, Pages 29-38]
  • Rooeintan, Mohammad Intelligent consumption management of residential buildings with the help of energy hub in the presence of multiple energy carriers [Volume 21, Issue 74, 2023, Pages 21-35]
  • Roshani, Gholamhossein Increasing efficiency of two-phase flowmeters using frequency-domain feature extraction and neural network in the detector output spectrum [Volume 19, Issue 67, 2021, Pages 47-57]
  • Rostami, SHAPE OPTIMIZATION OF CONTACT PROBLEMS SUBJECT TO MULTIPLE LOAD CASES USING BI-DIRECTIONAL EVOLUTIONARY STRUCTURAL OPTIMIZATION [Volume 10, Issue 30, 2012, Pages 77-86]
  • Rostami, Abbas modeling and Solution of a Multi-Objective Portfolio Selection by using a Simulated Annealing [Volume 14, Issue 45, 2016, Pages 99-109]
  • Rostami, Mohamad Taghi Modeling of methyl methacrylate Polymerization in a tubular reactor by utilize Power law model for determination of velocity profile [Volume 14, Issue 44, 2016, Pages 117-127]
  • Rostami, Seyyed Ghasem Frequency Modeling of Earthquake Occurrences by utilizing the Fourier Transform Method [Volume 19, Issue 64, 2021, Pages 1-14]
  • Rostami-Varnousfaaderani, Mahmoud 3D Lagrangian Modelling of Viscous and Inviscid incompressible Flow Using Conservative and Non-conservative Riemann Solvers and Density Filtering [Volume 19, Issue 64, 2021, Pages 129-138]
  • Rostami-Varnousfaaderani, Mahmoud Numerical Simulation of Fluid Flow with Real Viscosity in a Centrifugal Pump by SPH Method [Volume 21, Issue 73, 2023, Pages 119-133]
  • Rostampour, Amirhosein Robust synchronization of a class neutral chaotic systems Despite, unknown time-delay and parameter [Volume 21, Issue 75, 2023, Pages 225-238]
  • Rouhi, Saeed On the mechanical properties of polyvinyl pyrrolidone reinforced by single-walled carbon nanotubes using molecular dynamics simulations and finite element modeling [Volume 16, Issue 52, 2018, Pages 373-381]
  • Rouhparvar, Mohammadreza Application of FRP Material in Buckling Restrained Braces. [Volume 15, Issue 50, 2017, Pages 225-236]
  • Rramazani moghadam, Mohammad Investigating the effect of laser shock process on fracture and fatigue properties of 2024-T351 aluminum alloy using numerical modeling [Volume 21, Issue 75, 2023, Pages 67-82]

S

  • S, A Numerical investigation on effect of silica nanoparticles on the middle layer of salt gradient solar ponds [Volume 15, Issue 50, 2017, Pages 49-61]
  • S, M Modeling of index-guiding photonic crystal fiber with low-chromatic dispersion and low-nonlinearity effect [Volume 15, Issue 50, 2017, Pages 17-24]
  • S, S Settings in Employing Simulation Tools for Fast Determination of Time to Voltage Instability [Volume 16, Issue 55, 2018, Pages 401-410]
  • Saadat, Aminolah Mathematical Modeling of CO2 Removal in a Venturi Scrubber and Parametric Study on the Effect of Evaporation/Condensation of Droplets and Cooling Effect of Evaporation [Volume 12, Issue 37, 2014, Pages 15-24]
  • Saadatdar Arani, Seyyed Ali Design, construction, modeling and estimation of the second stage linear model of laboratory drone with cold gas thrusters based on genetic algorithm [Volume 22, Issue 77, 2024, Pages 1-12]
  • Saadat Fumane, INVESTIGATION OF CITY CYCLE EFFECTS ON FUEL CONSUMPTION AMOUNT [Volume 7, Issue 19, 2009, Pages 47-56]
  • Saadatinasab, Mehran Investigation of the Effect of Green Double Skin Facades on Energy Consumption of High-rise Buildings in Tehran's Climatic Conditions [Volume 17, Issue 56, 2019, Pages 51-61]
  • Saadatjoo, Fatemeh Performance Evaluation of WW and WD Concurrency Control Algorithms for Database Management, via Modeling by Colored Petri Net [Volume 15, Issue 51, 2017, Pages 99-111]
  • Saadatjoo, Fatemeh Offering four new models in the form of a hybrid methodology applied in order to promote the use [Volume 16, Issue 54, 2018, Pages 1-20]
  • Saadatjoo, Fatemeh Presentation of a Combined Code Generator and its Development in the Form of New Capabilities with Service-Oriented Architecture Approach [Volume 16, Issue 54, 2018, Pages 105-123]
  • Saadatjoo, Mohammad Ali Performance Evaluation of WW and WD Concurrency Control Algorithms for Database Management, via Modeling by Colored Petri Net [Volume 15, Issue 51, 2017, Pages 99-111]
  • Sabagh Renani, Mehdi Constitutive Model for Estimating Concrete Strength Using Ultrasonic Test Considering Mixing Ratios [Volume 17, Issue 56, 2019, Pages 367-374]
  • Sabahi, Farnaz Robust Controller Design of Double Fed Induction Generator in the Presence of Uncertainties From the System Model and Measurement [Volume 21, Issue 75, 2023, Pages 101-114]
  • Sabbagh, Reza Numerical study on the effect of geometrical parameters on flare tip wall temperature and emission [Volume 13, Issue 40, 2015, Pages 43-57]
  • Sabouri Rad, meghdad ELECTRICAL CIRCUIT MODELLING WITH PETRI NET BY USING OF CONTROL ARCS [Volume 11, Issue 35, 2013, Pages 39-47]
  • Sabzekar, Mostafa Script independent offline writer identification from handwriting samples based on texture using wavelet transform in Persian-English languages [Volume 18, Issue 63, 2020, Pages 1-13]
  • Sabzekar, Mostafa A Fair Group Recommendation System Based on Members and Leader Influences [Volume 22, Issue 77, 2024, Pages 221-243]
  • Sadedel, Majid Investigation on Adding Passive Toe Joints to the Feet Structure of 2D Humanoid Robot [Volume 16, Issue 53, 2018, Pages 157-170]
  • Sadeghi, Formulating three triangular elements for plate bending [Volume 8, Issue 23, 2011, Pages 1-17]
  • Sadeghi, Hossein A Game Theory-Based Approach to Hierarchically Rank Responses to Geological and Geotechnical Risks [Volume 22, Issue 78, 2024, Pages 157-170]
  • Sadeghi, Jafar Dynamic optimization of acetylene hydrogenation reactors with considering catalyst deactivation [Volume 20, Issue 69, 2022, Pages 71-80]
  • Sadeghi, Mohsen A New and Efficient Feature Extraction Method for Robust Speech Recognition Based on Fractional Fourier Transform and Differential Evolution Optimizer [Volume 18, Issue 61, 2020, Pages 85-96]
  • Sadeghi, Neda Development of a multi-objective mathematical model for sustainable diet planning of athletes [Volume 18, Issue 63, 2020, Pages 73-84]
  • Sadeghi, Sahar A modified Canonical Correlation Analysis Method for SSVEP Frequency Recognition [Volume 16, Issue 55, 2018, Pages 199-207]
  • Sadeghian, Ramin A hybrid algorithm to solve the flexible oil refinery production planning problem [Volume 20, Issue 69, 2022, Pages 113-129]
  • Sadeghi Yazdan, Ahmad Hybrid Robust Stochastic Bidding Strategy for Wind Farms Integrated with Compressed Air Energy Storage and Power to Gas Technology [Volume 19, Issue 65, 2021, Pages 137-148]
  • Sadigh Damghanizadeh, Mohammad Jafar Non-invasive Determination of Ankle Rotation Axes Using a Robotic Gyroscopic Mechanism [Volume 21, Issue 75, 2023, Pages 193-204]
  • Sadighi, Meysam Investigating the Shear Strength of New and Old Concrete Joints Under the Effect of Freezing and Thawing Cycles [Volume 22, Issue 77, 2024, Pages 95-106]
  • Sadodin, ANALYSIS OF EXERGY IN NATURAL GAS IN REDUCTION CITY GATE STATION [Volume 8, Issue 22, 2010, Pages 13-19]
  • Sadodin, ANALYSIS OF EXERGY IN NATURAL GAS IN REDUCTION CITY GATE STATION [Volume 8, Issue 22, 2010, Pages 13-19]
  • Sadodin, CALCULATION OF REDUCTION IN HEAT TRANSFER BETWEEN ENGINE AND VEHICLE BODY ROOM USING RADIATION SHIELDS WITH TEMPERATURE- DEPENDENT EMISSIVITY [Volume 9, Issue 25, 2011, Pages 11-19]
  • Sadodin, NUMERICAL SIMULATION OF MIXED CONVECTION OF FLUID FLOW AND HEAT TRANSFER WITHIN CAR RADIATOR WITH AN INSIDE HOT OBSTACLE FILLED WITH NANOFLUID [Volume 9, Issue 25, 2011, Pages 33-46]
  • Sadodin, NUMERICAL SIMULATION OF MIXED CONVECTION OF FLUID FLOW AND HEAT TRANSFER WITHIN CAR RADIATOR WITH AN INSIDE HOT OBSTACLE FILLED WITH NANOFLUID [Volume 9, Issue 25, 2011, Pages 33-46]
  • Sadodin, REDUCTION IN HEAT TRANSFER BETWEEN TWO CONCENTRIC CYLINDERS, THICK AND LONG USING THICK RADIATION SHIELDS WITH TEMPERATURE- DEPENDENT EMISSIVITY [Volume 9, Issue 27, 2011, Pages 61-71]
  • Sadodin, REDUCTION IN HEAT TRANSFER BETWEEN TWO CONCENTRIC CYLINDERS, THICK AND LONG USING THICK RADIATION SHIELDS WITH TEMPERATURE- DEPENDENT EMISSIVITY [Volume 9, Issue 27, 2011, Pages 61-71]
  • Sadodin, EVALUATION OF MIXED CONVECTION HEAT TRANSFER AND THERMAL CHARACTERISTIC AROUND TWO HEATED OBSTACLES IN INCLINED SQUARE CAVITY SUBJECTED TO A NANOFLUID [Volume 10, Issue 28, 2012, Pages 31-42]
  • Sadodin, EVALUATION OF MIXED CONVECTION HEAT TRANSFER AND THERMAL CHARACTERISTIC AROUND TWO HEATED OBSTACLES IN INCLINED SQUARE CAVITY SUBJECTED TO A NANOFLUID [Volume 10, Issue 28, 2012, Pages 31-42]
  • Sadodin, seifollah Non- Fourier Heat Transfer and Fluid Flow Simulation in Keyhole Plasma Arc Welding Process [Volume 14, Issue 44, 2016, Pages 35-47]
  • Sadr, Mohammad Homayoune The effect of fiber-matrix interface properties on damage behavior of composite materials [Volume 18, Issue 63, 2020, Pages 113-129]
  • Saedodin, FLOW BEHAVIOR AND THERMAL PERFORMANCE OF DOUBLE LID-DRIVEN CAVITY SUBJECTED TO NANOFLUID WITH VARIABLE PROPERTIES [Volume 10, Issue 30, 2012, Pages 43-60]
  • Saedodin, FLOW BEHAVIOR AND THERMAL PERFORMANCE OF DOUBLE LID-DRIVEN CAVITY SUBJECTED TO NANOFLUID WITH VARIABLE PROPERTIES [Volume 10, Issue 30, 2012, Pages 43-60]
  • Saedodin, ANALYTICAL SOLUTION OF NON-FOURIER HEAT CONDUCTION PROBLEM ON A SLAB UNDER CONVECTION BOUNDARY CONDITIONS [Volume 11, Issue 32, 2013, Pages 69-81]
  • Saedodin, ANALYTICAL SOLUTION OF NON-FOURIER HEAT CONDUCTION PROBLEM ON A SLAB UNDER CONVECTION BOUNDARY CONDITIONS [Volume 11, Issue 32, 2013, Pages 69-81]
  • Saedodin, Seyfolah Investigation of the forced convection heat transfer in the presence of radiation in metal foams using HPM [Volume 14, Issue 46, 2016, Pages 1-9]
  • Saedodin, Seyfolah Numerical Investigation of Convection and Radiation Heat Loss Reduction between Two Finite Concentric Cylinders Using Radiation Shields [Volume 15, Issue 50, 2017, Pages 63-74]
  • Saedodin, Seyfolah Convection and Radiation Heat Loss Reduction between Two Finite Concentric Cylinders Using Radiation Shields at Different Pressure: Experimental Study [Volume 15, Issue 50, 2017, Pages 75-84]
  • Saedodin, Seyfollah Numerical simulation of subsonic jet ejector [Volume 14, Issue 45, 2016, Pages 63-78]
  • Saeedi, Ahmad An Integrated Model to Develop Semi-Quantitative Scenarios Using a hybrid Method Based on Fuzzy Cognitive Map: A Case Study of Iranian Oil Production [Volume 17, Issue 56, 2019, Pages 157-168]
  • Saeedi, Hassan An Intelligent and Time Adaptive Model for Symmetrical and Asymmetrical Faults during Power Swing [Volume 18, Issue 61, 2020, Pages 35-47]
  • Saeidinezhad, PREDICTION AND ANALYSIS OF EXPERIMENTAL RESULTS OF HOT WIRE ANEMOMETRY BY USING OF NEURAL NETWORK [Volume 8, Issue 20, 2010, Pages 83-92]
  • Safaei, Faridoddin Analysis of Transformer Insulation Risk Due to Back Flashover Lightning on High Voltage Substations by Considering the Effect of Environmental Pollution [Volume 22, Issue 76, 2024, Pages 123-139]
  • Safaeian, Mehdi Sensor-less Predictive Control of Induction Motor with Super-Twisting Sliding Observer and Fuzzy Adaptive Estimator [Volume 19, Issue 66, 2021, Pages 53-63]
  • Safarzadeh, Habibollah Exergy analysis of a direct-expansion solar-assisted heat pump system considering the effects of pressure drop of the R134a refrigerant flow [Volume 16, Issue 52, 2018, Pages 53-66]
  • Safdari, Jaber Investigating the Effects of Nanoparticle and Surfactant on Mass Transfer coefficient in Pulsed Packed Column [Volume 19, Issue 66, 2021, Pages 141-156]
  • Saffari, Hamid A robust multi objective model for forward – reverse supply chain designing based on social responsibility [Volume 14, Issue 47, 2016, Pages 171-185]
  • Saffariyan, Farzam Simultaneous optimization of cut-off grade and capacity of mineral processing plant [Volume 15, Issue 49, 2017, Pages 235-244]
  • Sahaf, Seyyed Ali Equivalent Axle Load Factor Prediction Based on Artificial Neural Networks [Volume 19, Issue 65, 2021, Pages 149-160]
  • Saidi, ENERGY AND EXERGY ANALYSIS OF POWER GENERATION SYSTEM OF A MARINE DIESEL ENGINE [Volume 9, Issue 25, 2011, Pages 47-56]
  • Saidi Mobarakeh, Majid An Approach to the Identification and Prediction of Phishing Websites Using Classification Algorithms Based on Web Pages Characteristics [Volume 14, Issue 47, 2016, Pages 213-227]
  • Sajadi, Farzad Modelling and Extraction of Current Harmonic Components based on Instantaneous Power Theory for Shunt Active Filter under Weak Grid [Volume 22, Issue 76, 2024, Pages 27-44]
  • Sajjadi, FINITE ELEMENT ANALYSIS OF FRACTURE MECHANICS OF WHEEL-RAIL [Volume 9, Issue 26, 2011, Pages 23-31]
  • Salami, Majid Design of an Energy Regeneration System for Pressure Reducing Stations of Crude Oil Pipeline [Volume 21, Issue 72, 2023, Pages 31-47]
  • Salari, Mahmoud Numerical and Experimental Study of Ventilation Effects on Ventilated Cavitating Flow [Volume 15, Issue 51, 2017, Pages 29-41]
  • Salari-rad, Hossein Numerical Analysis of the Segmental Supporting System Under Earthquake Loading [Volume 16, Issue 54, 2018, Pages 177-187]
  • Salehabadi, Mohamad High order modeling of shocks and disturbances in compressible flows using WENO scheme [Volume 21, Issue 73, 2023, Pages 263-277]
  • Salehi, Gholamreza Study the Effects of Magnetic Field and Porous Medium on Heat Transfer and Flow of a Nanofluid in a Wavy Channel [Volume 20, Issue 71, 2022, Pages 13-25]
  • Salehi, Gholamreza Effect of Magnetic Field and Hybrid Nanofluid on Heat Transfer Through a Microchannel [Volume 22, Issue 78, 2024, Pages 185-199]
  • Salehi, Seyed Mohammad Mahdi Modelling of Overlapping by Community Detection Algorithms in Social Networks: A Review [Volume 17, Issue 56, 2019, Pages 247-265]
  • Salehi Afshar, Kamran Experimental study on The Angle of attack effect on Hydraulic- Thermal performance of a cam-shaped tube with constant heat flux in cross flow [Volume 18, Issue 60, 2020, Pages 27-37]
  • Salehi Dobakhshari, Ahmad Wide-Area Protection of Power Transmission Network without Utilizing External Network Model and Synchronized Phasor Measurement [Volume 20, Issue 69, 2022, Pages 17-28]
  • Salehi Kolahi, Mohammad Reza Kinematics and workspace analysis of a 3DOF parallel reconfigurable robot [Volume 21, Issue 73, 2023, Pages 171-185]
  • Salehin, Ali The effect of surface geometry and the fluid inside the channel wall on thermal-hydraulic performance in sinusoidal corrugated channel in the turbulent fluid flow. [Volume 17, Issue 57, 2019, Pages 273-283]
  • Salehin, Ali Effect of Magnetic Field and Hybrid Nanofluid on Heat Transfer Through a Microchannel [Volume 22, Issue 78, 2024, Pages 185-199]
  • Salehi Neishabouri, seyyed AliAkbar Application of Euler- Euler method in estimation of maximum depth of local scour [Volume 15, Issue 51, 2017, Pages 289-298]
  • Salehi YaneSari, THE EFFECT OF MODELING METHODS OF MASONRY INFILL ON SEISMIC PERFORMANCE OF RC MOMENT RESISTING FRAMES [Volume 8, Issue 20, 2010, Pages 27-37]
  • Salimi, THE MATHEMATICAL FORM OF MATERIAL CONSTITUTIVE LAWS APPLICABLE FOR MODELING OF METAL PLASTIC BEHAVIOR IN SIMULATION OF MACHINING [Volume 10, Issue 31, 2012, Pages 37-48]
  • Salmani Kouyakhi, Mohammad Design a Photovoltaics (PV) System Interfaced by Hybrid Active Power Filter Based on the Load Current Frequency Orders Separation Idea in Distribution Network [Volume 19, Issue 67, 2021, Pages 1-11]
  • Salmani Tehrani, Mehdi Analytical Investigating of the Pattern of Yielding Initiation for a Rotating Hallow FGM Cylinder [Volume 13, Issue 43, 2016, Pages 25-38]
  • Salmasi, Farzin Application of numerical simulation in determining the position and dimensions of weep hole of concrete channel under different groundwater levels [Volume 16, Issue 55, 2018, Pages 267-278]
  • Salmasnia, Ali Multi-objective optimization of average travel time for a metro line by considering both location and dispersion effects [Volume 16, Issue 52, 2018, Pages 331-345]
  • Samadi, Mahdi An Analytical Model to Evaluate the Effects of Wind Turbine Parameters and the Probabilistic Characteristic of Wind Speed on the Average LMP of the Power Market [Volume 18, Issue 62, 2020, Pages 31-42]
  • Samadi, Mahdi Presenting a fuzzy multi-objective approach for dynamic reconfiguration of the distribution network in the presence of distributed generation units and energy storage systems [Volume 20, Issue 71, 2022, Pages 175-188]
  • Samadiyan, Majid Mechanical Properties Analysis of a Monolayer Biphenylene at Different Temperatures [Volume 22, Issue 76, 2024, Pages 177-187]
  • Samadiyan, Majid Molecular Dynamics Investigation of the Mechanical Properties of Germanium Reinforced with Iron Nanoparticles at Different Speeds [Volume 22, Issue 79, 2024, Pages 109-119]
  • Samimi, Abouzar Optimal Scheduling of Energy Storage Systems with Private Ownership Based on a Stochastic-Robust Hybrid Optimization Model in Energy and Ancillary Services Markets [Volume 22, Issue 76, 2024, Pages 1-12]
  • Samipour, ANALYTICAL AND NUMERICAL INVESTIGATION OF WIRE-WINDING PROCESS EFFECT IN REINFORCEMENT OF CNG VESSELS TYPE II [Volume 9, Issue 26, 2011, Pages 49-55]
  • Sandidzadeh, Mohammad Ali Designing an optimal automatic train operation system using the model-predictive controller with a case study of a part of Tehran subway line 1 [(Articles in Press)]
  • Sanjabi, Bahman An Intrusion Detection System Based on Deep Learning and Metaheuristic Algorithm for IOT [Volume 22, Issue 76, 2024, Pages 69-83]
  • Sanjaranipour, Murteza Instability and Wrinkles in the Bending of elastic sector with analytical WKB method [Volume 20, Issue 71, 2022, Pages 209-217]
  • Sarafrazi, Formulating three triangular elements for plate bending [Volume 8, Issue 23, 2011, Pages 1-17]
  • Sardari Zarchi, Mohsen Deep learning framework to extract anatomy for mosquito image classification [Volume 20, Issue 70, 2022, Pages 107-120]
  • Sardashti Birjandi, Mohammad Reza Coupled simulation of convection sec